| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix GEM handle creation UAF
Userspace can guess the handle value and try to race GEM object creation
with handle close, resulting in a use-after-free if we dereference the
object after dropping the handle's reference. For that reason, dropping
the handle's reference must be done *after* we are done dereferencing
the object. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer
There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.
Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.
Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID
Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text
Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller
Changes in v4:
-- split into two patches
Changes in v5:
-- delete empty line between tags
Changes in v6:
-- remove extra "that" and fixed line more than 75 char at commit text
Patchwork: https://patchwork.freedesktop.org/patch/516121/ |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/mm: fix incorrect file_map_count for invalid pmd
The page table check trigger BUG_ON() unexpectedly when split hugepage:
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:119!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748
Hardware name: linux,dummy-virt (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : page_table_check_set.isra.0+0x398/0x468
lr : page_table_check_set.isra.0+0x1c0/0x468
[...]
Call trace:
page_table_check_set.isra.0+0x398/0x468
__page_table_check_pte_set+0x160/0x1c0
__split_huge_pmd_locked+0x900/0x1648
__split_huge_pmd+0x28c/0x3b8
unmap_page_range+0x428/0x858
unmap_single_vma+0xf4/0x1c8
zap_page_range+0x2b0/0x410
madvise_vma_behavior+0xc44/0xe78
do_madvise+0x280/0x698
__arm64_sys_madvise+0x90/0xe8
invoke_syscall.constprop.0+0xdc/0x1d8
do_el0_svc+0xf4/0x3f8
el0_svc+0x58/0x120
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x19c/0x1a0
[...]
On arm64, pmd_leaf() will return true even if the pmd is invalid due to
pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count
will not only decrease once but also increase once. Then in set_pte_at(),
the file_map_count increase again, and so trigger BUG_ON() unexpectedly.
Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: fix pci device refcount leak
As the comment of pci_get_domain_bus_and_slot() says, it
returns a PCI device with refcount incremented, when finish
using it, the caller must decrement the reference count by
calling pci_dev_put().
In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(),
pci_dev_put() is called to avoid leak. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu: Don't unregister on shutdown
Michael Walle says he noticed the following stack trace while performing
a shutdown with "reboot -f". He suggests he got "lucky" and just hit the
correct spot for the reboot while there was a packet transmission in
flight.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930
Hardware name: Kontron KBox A-230-LS (DT)
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_map_page+0x9c/0x254
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_map_page_attrs+0x1ec/0x250
enetc_start_xmit+0x14c/0x10b0
enetc_xmit+0x60/0xdc
dev_hard_start_xmit+0xb8/0x210
sch_direct_xmit+0x11c/0x420
__dev_queue_xmit+0x354/0xb20
ip6_finish_output2+0x280/0x5b0
__ip6_finish_output+0x15c/0x270
ip6_output+0x78/0x15c
NF_HOOK.constprop.0+0x50/0xd0
mld_sendpack+0x1bc/0x320
mld_ifc_work+0x1d8/0x4dc
process_one_work+0x1e8/0x460
worker_thread+0x178/0x534
kthread+0xe0/0xe4
ret_from_fork+0x10/0x20
Code: d503201f f9416800 d503233f d50323bf (f9404c00)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
This appears to be reproducible when the board has a fixed IP address,
is ping flooded from another host, and "reboot -f" is used.
The following is one more manifestation of the issue:
$ reboot -f
kvm: exiting hardware virtualization
cfg80211: failed to load regulatory.db
arm-smmu 5000000.iommu: disabling translation
sdhci-esdhc 2140000.mmc: Removing from iommu group 11
sdhci-esdhc 2150000.mmc: Removing from iommu group 12
fsl-edma 22c0000.dma-controller: Removing from iommu group 17
dwc3 3100000.usb: Removing from iommu group 9
dwc3 3110000.usb: Removing from iommu group 10
ahci-qoriq 3200000.sata: Removing from iommu group 2
fsl-qdma 8380000.dma-controller: Removing from iommu group 20
platform f080000.display: Removing from iommu group 0
etnaviv-gpu f0c0000.gpu: Removing from iommu group 1
etnaviv etnaviv: Removing from iommu group 1
caam_jr 8010000.jr: Removing from iommu group 13
caam_jr 8020000.jr: Removing from iommu group 14
caam_jr 8030000.jr: Removing from iommu group 15
caam_jr 8040000.jr: Removing from iommu group 16
fsl_enetc 0000:00:00.0: Removing from iommu group 4
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.1: Removing from iommu group 5
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.2: Removing from iommu group 6
fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8
mscc_felix 0000:00:00.5: Removing from iommu group 3
fsl_enetc 0000:00:00.6: Removing from iommu group 7
pcieport 0001:00:00.0: Removing from iommu group 18
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
pcieport 0002:00:00.0: Removing from iommu group 19
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_unmap_page+0x38/0xe0
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_unmap_page_attrs+0x38/0x1d0
en
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: Don't unregister on shutdown
Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.
Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
Since commit 07ec77a1d4e8 ("sched: Allow task CPU affinity to be
restricted on asymmetric systems"), the setting and clearing of
user_cpus_ptr are done under pi_lock for arm64 architecture. However,
dup_user_cpus_ptr() accesses user_cpus_ptr without any lock
protection. Since sched_setaffinity() can be invoked from another
process, the process being modified may be undergoing fork() at
the same time. When racing with the clearing of user_cpus_ptr in
__set_cpus_allowed_ptr_locked(), it can lead to user-after-free and
possibly double-free in arm64 kernel.
Commit 8f9ea86fdf99 ("sched: Always preserve the user requested
cpumask") fixes this problem as user_cpus_ptr, once set, will never
be cleared in a task's lifetime. However, this bug was re-introduced
in commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in
do_set_cpus_allowed(). This time, it will affect all arches.
Fix this bug by always clearing the user_cpus_ptr of the newly
cloned/forked task before the copying process starts and check the
user_cpus_ptr state of the source task under pi_lock.
Note to stable, this patch won't be applicable to stable releases.
Just copy the new dup_user_cpus_ptr() function over. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM
storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(),
which in a confidential VM allocates swiotlb bounce buffers. If the I/O
submission fails in storvsc_do_io(), the I/O is typically retried by higher
level code, but the bounce buffer memory is never freed. The mostly like
cause of I/O submission failure is a full VMBus channel ring buffer, which
is not uncommon under high I/O loads. Eventually enough bounce buffer
memory leaks that the confidential VM can't do any I/O. The same problem
can arise in a non-confidential VM with kernel boot parameter
swiotlb=force.
Fix this by doing scsi_dma_unmap() in the case of an I/O submission
error, which frees the bounce buffer memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof-nau8825: fix module alias overflow
The maximum name length for a platform_device_id entry is 20 characters
including the trailing NUL byte. The sof_nau8825.c file exceeds that,
which causes an obscure error message:
sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding]
MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>");
^~~~
include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS'
^~~~~~
include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO'
^~~~
include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO'
= __MODULE_INFO_PREFIX __stringify(tag) "=" info
I could not figure out how to make the module handling robust enough
to handle this better, but as a quick fix, using slightly shorter
names that are still unique avoids the build issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path
of_icc_get() alloc resources for path1, we should release it when not
need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1.
Defer getting path1 to fix this.
Patchwork: https://patchwork.freedesktop.org/patch/514264/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Remove rcu locks from user resources
User resource lookups used rcu to avoid two extra atomics. Unfortunately
the rcu paths were buggy and it was easy to make the driver crash by
submitting command buffers from two different threads. Because the
lookups never show up in performance profiles replace them with a
regular spin lock which fixes the races in accesses to those shared
resources.
Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and
seen crashes with apps using shared resources. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Add check for kzalloc
Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.
Moreover, use the goto-label to share the clean code. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix potential memory leak in ice_gnss_tty_write()
The ice_gnss_tty_write() return directly if the write_buf alloc failed,
leaking the cmd_buf.
Fix by free cmd_buf if write_buf alloc failed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix command stats access after free
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
Kernel log:
[ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0
[ 2394.810610] PGD 0 P4D 0
[ 2394.811811] Oops: 0002 [#1] SMP NOPTI
...
[ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
...
[ 2394.829505] Call Trace:
[ 2394.830667] _raw_spin_lock_irq+0x23/0x26
[ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core]
[ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core]
[ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core]
[ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core]
[ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0
[ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100
[ 2394.838663] ? __rtnl_unlock+0x25/0x50
[ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150
[ 2394.840862] duplex_show+0x6e/0xc0
[ 2394.841963] dev_attr_show+0x1c/0x40
[ 2394.843048] sysfs_kf_seq_show+0x9b/0x100
[ 2394.844123] seq_read+0x153/0x410
[ 2394.845187] vfs_read+0x91/0x140
[ 2394.846226] ksys_read+0x4f/0xb0
[ 2394.847234] do_syscall_64+0x5b/0x1a0
[ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
Upon updating MAC security entity (SecY) in hw offload path, the macsec
security association (SA) initialization routine is called. In case of
extended packet number (epn) is enabled the salt and ssci attributes are
retrieved using the MACsec driver rx_sa context which is unavailable when
updating a SecY property such as encoding-sa hence the null dereference.
Fix by using the provided SA to set those attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd: Fix refcount leak in amd_pmc_probe
pci_get_domain_bus_and_slot() takes reference, the caller should release
the reference by calling pci_dev_put() after use. Call pci_dev_put() in
the error path to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Fix driver shutdown on closed serdev
The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either. Also skip this step if device is powered off
(qca_power_shutdown()).
The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:
Unable to handle kernel paging request at virtual address
0072662f67726fd7
...
CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W
6.1.0-rt5-00325-g8a5f56bcfcca #8
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
tty_driver_flush_buffer+0x4/0x30
serdev_device_write_flush+0x24/0x34
qca_serdev_shutdown+0x80/0x130 [hci_uart]
device_shutdown+0x15c/0x260
kernel_restart+0x48/0xac
KASAN report:
BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1
CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xdc/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x68/0x84
print_report+0x188/0x488
kasan_report+0xa4/0xf0
__asan_load8+0x80/0xac
tty_driver_flush_buffer+0x1c/0x50
ttyport_write_flush+0x34/0x44
serdev_device_write_flush+0x48/0x60
qca_serdev_shutdown+0x124/0x274
device_shutdown+0x1e8/0x350
kernel_restart+0x48/0xb0
__do_sys_reboot+0x244/0x2d0
__arm64_sys_reboot+0x54/0x70
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x44/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xbc/0x140
el0t_64_sync+0x190/0x194 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix initialization of rx->link and rx->link_sta
There are some codepaths that do not initialize rx->link_sta properly. This
causes a crash in places which assume that rx->link_sta is valid if rx->sta
is valid.
One known instance is triggered by __ieee80211_rx_h_amsdu being called from
fast-rx. It results in a crash like this one:
BUG: kernel NULL pointer dereference, address: 00000000000000a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 1 PID: 506 Comm: mt76-usb-rx phy Tainted: G E 6.1.0-debian64x+1.7 #3
Hardware name: ZOTAC ZBOX-ID92/ZBOX-IQ01/ZBOX-ID92/ZBOX-IQ01, BIOS B220P007 05/21/2014
RIP: 0010:ieee80211_deliver_skb+0x62/0x1f0 [mac80211]
Code: 00 48 89 04 24 e8 9e a7 c3 df 89 c0 48 03 1c c5 a0 ea 39 a1 4c 01 6b 08 48 ff 03 48
83 7d 28 00 74 11 48 8b 45 30 48 63 55 44 <48> 83 84 d0 a8 00 00 00 01 41 8b 86 c0
11 00 00 8d 50 fd 83 fa 01
RSP: 0018:ffff999040803b10 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffffb9903f496480 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff999040803ce0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d21828ac900
R13: 000000000000004a R14: ffff8d2198ed89c0 R15: ffff8d2198ed8000
FS: 0000000000000000(0000) GS:ffff8d24afe80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a8 CR3: 0000000429810002 CR4: 00000000001706e0
Call Trace:
<TASK>
__ieee80211_rx_h_amsdu+0x1b5/0x240 [mac80211]
? ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211]
? __local_bh_enable_ip+0x3b/0xa0
ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211]
? prepare_transfer+0x109/0x1a0 [xhci_hcd]
ieee80211_rx_list+0xa80/0xda0 [mac80211]
mt76_rx_complete+0x207/0x2e0 [mt76]
mt76_rx_poll_complete+0x357/0x5a0 [mt76]
mt76u_rx_worker+0x4f5/0x600 [mt76_usb]
? mt76_get_min_avg_rssi+0x140/0x140 [mt76]
__mt76_worker_fn+0x50/0x80 [mt76]
kthread+0xed/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Since the initialization of rx->link and rx->link_sta is rather convoluted
and duplicated in many places, clean it up by using a helper function to
set it.
[remove unnecessary rx->sta->sta.mlo check] |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
Currently, there is a race window between the point when the mutex is
unlocked in fastrpc_map_lookup and the reference count increasing
(fastrpc_map_get) in fastrpc_map_find, which can also lead to
use-after-free.
So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us
to both protect the maps list by also taking the &fl->lock spinlock and
the reference count, since the spinlock will be released only after.
Add take_ref argument to make this suitable for all callers. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix use-after-free race condition for maps
It is possible that in between calling fastrpc_map_get() until
map->fl->lock is taken in fastrpc_free_map(), another thread can call
fastrpc_map_lookup() and get a reference to a map that is about to be
deleted.
Rewrite fastrpc_map_get() to only increase the reference count of a map
if it's non-zero. Propagate this to callers so they can know if a map is
about to be deleted.
Fixes this warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate
...
Call trace:
refcount_warn_saturate
[fastrpc_map_get inlined]
[fastrpc_map_lookup inlined]
fastrpc_map_create
fastrpc_internal_invoke
fastrpc_device_ioctl
__arm64_sys_ioctl
invoke_syscall |
