| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ib_srp: Fix a deadlock
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync() |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix crash due to out of bounds access into reg2btf_ids.
When commit e6ac2450d6de ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
If iio_device_register() fails, a previous ioremap() is left unbalanced.
Update the error handling path and add the missing iounmap() call, as
already done in the remove function. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: tsc2046: fix memory corruption by preventing array overflow
On one side we have indio_dev->num_channels includes all physical channels +
timestamp channel. On other side we have an array allocated only for
physical channels. So, fix memory corruption by ARRAY_SIZE() instead of
num_channels variable.
Note the first case is a cleanup rather than a fix as the software
timestamp channel bit in active_scanmask is never set by the IIO core. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: rndis: add spinlock for rndis response list
There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.
[ 361.894299] [1: irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (ffffff80651764d0),
but was ffffff883dc36f80. (next=ffffff80651764d0).
[ 361.904380] [1: irq/191-dwc3:16979] Call trace:
[ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90
[ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0
[ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84
[ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4
[ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60
[ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0
[ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc
[ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc
[ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec
[ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Do not change route.addr.src_addr outside state checks
If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.
For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():
if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)
Which would manifest as this trace from syzkaller:
BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204
CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
__list_add_valid+0x93/0xa0 lib/list_debug.c:26
__list_add include/linux/list.h:67 [inline]
list_add_tail include/linux/list.h:100 [inline]
cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
vfs_write+0x28e/0xa30 fs/read_write.c:603
ksys_write+0x1ee/0x250 fs/read_write.c:658
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().
Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.
This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change
route.addr.src_addr.ss_family") |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: int340x: fix memory leak in int3400_notify()
It is easy to hit the below memory leaks in my TigerLake platform:
unreferenced object 0xffff927c8b91dbc0 (size 32):
comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s)
hex dump (first 32 bytes):
4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The
72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk.
backtrace:
[<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
[<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
[<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
[<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
[<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
[<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
[<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
[<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
[<ffffffff9c2cb4dd>] kthread+0xfd/0x130
[<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30
Fix it by calling kfree() accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fix oops caused by irqsoff latency tracer
The trace_hardirqs_{on,off}() require the caller to setup frame pointer
properly. This because these two functions use macro 'CALLER_ADDR1' (aka.
__builtin_return_address(1)) to acquire caller info. If the $fp is used
for other purpose, the code generated this macro (as below) could trigger
memory access fault.
0xffffffff8011510e <+80>: ld a1,-16(s0)
0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here
The oops message during booting if compiled with 'irqoff' tracer enabled:
[ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8
[ 0.041925][ T0] Oops [#1]
[ 0.042063][ T0] Modules linked in:
[ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29
[ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT)
[ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2
[ 0.044601][ T0] ra : restore_all+0x12/0x6e
[ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0
[ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020
[ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0
[ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100
[ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45
[ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50
[ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8
[ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000
[ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000
[ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368
[ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d
[ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e
This because the $fp(aka. $s0) register is not used as frame pointer in the
assembly entry code.
resume_kernel:
REG_L s0, TASK_TI_PREEMPT_COUNT(tp)
bnez s0, restore_all
REG_L s0, TASK_TI_FLAGS(tp)
andi s0, s0, _TIF_NEED_RESCHED
beqz s0, restore_all
call preempt_schedule_irq
j restore_all
To fix above issue, here we add one extra level wrapper for function
trace_hardirqs_{on,off}() so they can be safely called by low level entry
code. |
| In the Linux kernel, the following vulnerability has been resolved:
iwlwifi: mvm: check debugfs_dir ptr before use
When "debugfs=off" is used on the kernel command line, iwiwifi's
mvm module uses an invalid/unchecked debugfs_dir pointer and causes
a BUG:
BUG: kernel NULL pointer dereference, address: 000000000000004f
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7
Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021
RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm]
Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73
RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246
RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328
RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c
RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620
R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000
R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320
FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm]
iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm]
iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm]
_iwl_op_mode_start+0x6f/0xd0 [iwlwifi]
iwl_opmode_register+0x6a/0xe0 [iwlwifi]
? 0xffffffffa0231000
iwl_mvm_init+0x35/0x1000 [iwlmvm]
? 0xffffffffa0231000
do_one_initcall+0x5a/0x1b0
? kmem_cache_alloc+0x1e5/0x2f0
? do_init_module+0x1e/0x220
do_init_module+0x48/0x220
load_module+0x2602/0x2bc0
? __kernel_read+0x145/0x2e0
? kernel_read_file+0x229/0x290
__do_sys_finit_module+0xc5/0x130
? __do_sys_finit_module+0xc5/0x130
__x64_sys_finit_module+0x13/0x20
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f64dda564dd
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd
RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001
RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002
R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2
R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018
</TASK>
Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev
CR2: 000000000000004f
---[ end trace 0000000000000000 ]---
Check the debugfs_dir pointer for an error before using it.
[change to make both conditional] |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix TZ_GET_TRIP NULL pointer dereference
Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if
the thermal zone does not define one. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: destroy queues before real_num_tx_queues is zeroed
xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to
delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5
("net-sysfs: update the queue counts in the unregistration path"),
unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two
facts together means, that xennet_destroy_queues() called from
xennet_remove() cannot do its job, because it's called after
unregister_netdev(). This results in kfree-ing queues that are still
linked in napi, which ultimately crashes:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226
RIP: 0010:free_netdev+0xa3/0x1a0
Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00
RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff
RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050
R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680
FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0
Call Trace:
<TASK>
xennet_remove+0x13d/0x300 [xen_netfront]
xenbus_dev_remove+0x6d/0xf0
__device_release_driver+0x17a/0x240
device_release_driver+0x24/0x30
bus_remove_device+0xd8/0x140
device_del+0x18b/0x410
? _raw_spin_unlock+0x16/0x30
? klist_iter_exit+0x14/0x20
? xenbus_dev_request_and_reply+0x80/0x80
device_unregister+0x13/0x60
xenbus_dev_changed+0x18e/0x1f0
xenwatch_thread+0xc0/0x1a0
? do_wait_intr_irq+0xa0/0xa0
kthread+0x16b/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Fix this by calling xennet_destroy_queues() from xennet_uninit(),
when real_num_tx_queues is still available. This ensures that queues are
destroyed when real_num_tx_queues is set to 0, regardless of how
unregister_netdev() was called.
Originally reported at
https://github.com/QubesOS/qubes-issues/issues/7257 |
| In the Linux kernel, the following vulnerability has been resolved:
blktrace: fix use after free for struct blk_trace
When tracing the whole disk, 'dropped' and 'msg' will be created
under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free()
won't remove those files. What's worse, the following UAF can be
triggered because of accessing stale 'dropped' and 'msg':
==================================================================
BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100
Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188
CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_address_description.constprop.0.cold+0xab/0x381
? blk_dropped_read+0x89/0x100
? blk_dropped_read+0x89/0x100
kasan_report.cold+0x83/0xdf
? blk_dropped_read+0x89/0x100
kasan_check_range+0x140/0x1b0
blk_dropped_read+0x89/0x100
? blk_create_buf_file_callback+0x20/0x20
? kmem_cache_free+0xa1/0x500
? do_sys_openat2+0x258/0x460
full_proxy_read+0x8f/0xc0
vfs_read+0xc6/0x260
ksys_read+0xb9/0x150
? vfs_write+0x3d0/0x3d0
? fpregs_assert_state_consistent+0x55/0x60
? exit_to_user_mode_prepare+0x39/0x1e0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fbc080d92fd
Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1
RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd
RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045
RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd
R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0
R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8
</TASK>
Allocated by task 1050:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
do_blk_trace_setup+0xcb/0x410
__blk_trace_setup+0xac/0x130
blk_trace_ioctl+0xe9/0x1c0
blkdev_ioctl+0xf1/0x390
__x64_sys_ioctl+0xa5/0xe0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 1050:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x103/0x180
kfree+0x9a/0x4c0
__blk_trace_remove+0x53/0x70
blk_trace_ioctl+0x199/0x1c0
blkdev_common_ioctl+0x5e9/0xb30
blkdev_ioctl+0x1a5/0x390
__x64_sys_ioctl+0xa5/0xe0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88816912f380
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 88 bytes inside of
96-byte region [ffff88816912f380, ffff88816912f3e0)
The buggy address belongs to the page:
page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f
flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: fix use-after-free in __nf_register_net_hook()
We must not dereference @new_hooks after nf_hook_mutex has been released,
because other threads might have freed our allocated hooks already.
BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline]
BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430
CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
hooks_validate net/netfilter/core.c:171 [inline]
__nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024
rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084
__sys_setsockopt+0x2db/0x610 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f65a1ace7d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130
R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000
</TASK>
The buggy address belongs to the page:
page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993
prep_new_page mm/page_alloc.c:2434 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
__alloc_pages_node include/linux/gfp.h:572 [inline]
alloc_pages_node include/linux/gfp.h:595 [inline]
kmalloc_large_node+0x62/0x130 mm/slub.c:4438
__kmalloc_node+0x35a/0x4a0 mm/slub.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: fix possible use-after-free
Eric Dumazet says:
The sock_hold() side seems suspect, because there is no guarantee
that sk_refcnt is not already 0.
On failure, we cannot queue the packet and need to indicate an
error. The packet will be dropped by the caller.
v2: split skb prefetch hunk into separate change |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: ensure we call ipv6_mc_down() at most once
There are two reasons for addrconf_notify() to be called with NETDEV_DOWN:
either the network device is actually going down, or IPv6 was disabled
on the interface.
If either of them stays down while the other is toggled, we repeatedly
call the code for NETDEV_DOWN, including ipv6_mc_down(), while never
calling the corresponding ipv6_mc_up() in between. This will cause a
new entry in idev->mc_tomb to be allocated for each multicast group
the interface is subscribed to, which in turn leaks one struct ifmcaddr6
per nontrivial multicast group the interface is subscribed to.
The following reproducer will leak at least $n objects:
ip addr add ff2e::4242/32 dev eth0 autojoin
sysctl -w net.ipv6.conf.eth0.disable_ipv6=1
for i in $(seq 1 $n); do
ip link set up eth0; ip link set down eth0
done
Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the
sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2)
can also be used to create a nontrivial idev->mc_list, which will the
leak objects with the right up-down-sequence.
Based on both sources for NETDEV_DOWN events the interface IPv6 state
should be considered:
- not ready if the network interface is not ready OR IPv6 is disabled
for it
- ready if the network interface is ready AND IPv6 is enabled for it
The functions ipv6_mc_up() and ipv6_down() should only be run when this
state changes.
Implement this by remembering when the IPv6 state is ready, and only
run ipv6_mc_down() if it actually changed from ready to not ready.
The other direction (not ready -> ready) already works correctly, as:
- the interface notification triggered codepath for NETDEV_UP /
NETDEV_CHANGE returns early if ipv6 is disabled, and
- the disable_ipv6=0 triggered codepath skips fully initializing the
interface as long as addrconf_link_ready(dev) returns false
- calling ipv6_mc_up() repeatedly does not leak anything |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix connection leak
There's a potential leak issue under following execution sequence :
smc_release smc_connect_work
if (sk->sk_state == SMC_INIT)
send_clc_confirim
tcp_abort();
...
sk.sk_state = SMC_ACTIVE
smc_close_active
switch(sk->sk_state) {
...
case SMC_ACTIVE:
smc_close_final()
// then wait peer closed
Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are
still in the tcp send buffer, in which case our connection token cannot
be delivered to the server side, which means that we cannot get a
passive close message at all. Therefore, it is impossible for the to be
disconnected at all.
This patch tries a very simple way to avoid this issue, once the state
has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the
smc connection, considering that the state is SMC_INIT before
tcp_abort(), abandoning the complete disconnection process should not
cause too much problem.
In fact, this problem may exist as long as the CLC CONFIRM message is
not received by the server. Whether a timer should be added after
smc_close_final() needs to be discussed in the future. But even so, this
patch provides a faster release for connection in above case, it should
also be valuable. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: lcd2s: Fix memory leak in ->remove()
Once allocated the struct lcd2s_data is never freed.
Fix the memory leak by switching to devm_kzalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: free reset-work-item when flushing
Fix a tiny memory leak when flushing the reset work queue. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix I/O page table memory leak
The current logic updates the I/O page table mode for the domain
before calling the logic to free memory used for the page table.
This results in IOMMU page table memory leak, and can be observed
when launching VM w/ pass-through devices.
Fix by freeing the memory used for page table before updating the mode. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix relocation crash due to premature return from btrfs_commit_transaction()
We are seeing crashes similar to the following trace:
[38.969182] WARNING: CPU: 20 PID: 2105 at fs/btrfs/relocation.c:4070 btrfs_relocate_block_group+0x2dc/0x340 [btrfs]
[38.973556] CPU: 20 PID: 2105 Comm: btrfs Not tainted 5.17.0-rc4 #54
[38.974580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[38.976539] RIP: 0010:btrfs_relocate_block_group+0x2dc/0x340 [btrfs]
[38.980336] RSP: 0000:ffffb0dd42e03c20 EFLAGS: 00010206
[38.981218] RAX: ffff96cfc4ede800 RBX: ffff96cfc3ce0000 RCX: 000000000002ca14
[38.982560] RDX: 0000000000000000 RSI: 4cfd109a0bcb5d7f RDI: ffff96cfc3ce0360
[38.983619] RBP: ffff96cfc309c000 R08: 0000000000000000 R09: 0000000000000000
[38.984678] R10: ffff96cec0000001 R11: ffffe84c80000000 R12: ffff96cfc4ede800
[38.985735] R13: 0000000000000000 R14: 0000000000000000 R15: ffff96cfc3ce0360
[38.987146] FS: 00007f11c15218c0(0000) GS:ffff96d6dfb00000(0000) knlGS:0000000000000000
[38.988662] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[38.989398] CR2: 00007ffc922c8e60 CR3: 00000001147a6001 CR4: 0000000000370ee0
[38.990279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[38.991219] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[38.992528] Call Trace:
[38.992854] <TASK>
[38.993148] btrfs_relocate_chunk+0x27/0xe0 [btrfs]
[38.993941] btrfs_balance+0x78e/0xea0 [btrfs]
[38.994801] ? vsnprintf+0x33c/0x520
[38.995368] ? __kmalloc_track_caller+0x351/0x440
[38.996198] btrfs_ioctl_balance+0x2b9/0x3a0 [btrfs]
[38.997084] btrfs_ioctl+0x11b0/0x2da0 [btrfs]
[38.997867] ? mod_objcg_state+0xee/0x340
[38.998552] ? seq_release+0x24/0x30
[38.999184] ? proc_nr_files+0x30/0x30
[38.999654] ? call_rcu+0xc8/0x2f0
[39.000228] ? __x64_sys_ioctl+0x84/0xc0
[39.000872] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[39.001973] __x64_sys_ioctl+0x84/0xc0
[39.002566] do_syscall_64+0x3a/0x80
[39.003011] entry_SYSCALL_64_after_hwframe+0x44/0xae
[39.003735] RIP: 0033:0x7f11c166959b
[39.007324] RSP: 002b:00007fff2543e998 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[39.008521] RAX: ffffffffffffffda RBX: 00007f11c1521698 RCX: 00007f11c166959b
[39.009833] RDX: 00007fff2543ea40 RSI: 00000000c4009420 RDI: 0000000000000003
[39.011270] RBP: 0000000000000003 R08: 0000000000000013 R09: 00007f11c16f94e0
[39.012581] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff25440df3
[39.014046] R13: 0000000000000000 R14: 00007fff2543ea40 R15: 0000000000000001
[39.015040] </TASK>
[39.015418] ---[ end trace 0000000000000000 ]---
[43.131559] ------------[ cut here ]------------
[43.132234] kernel BUG at fs/btrfs/extent-tree.c:2717!
[43.133031] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[43.133702] CPU: 1 PID: 1839 Comm: btrfs Tainted: G W 5.17.0-rc4 #54
[43.134863] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[43.136426] RIP: 0010:unpin_extent_range+0x37a/0x4f0 [btrfs]
[43.139913] RSP: 0000:ffffb0dd4216bc70 EFLAGS: 00010246
[43.140629] RAX: 0000000000000000 RBX: ffff96cfc34490f8 RCX: 0000000000000001
[43.141604] RDX: 0000000080000001 RSI: 0000000051d00000 RDI: 00000000ffffffff
[43.142645] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff96cfd07dca50
[43.143669] R10: ffff96cfc46e8a00 R11: fffffffffffec000 R12: 0000000041d00000
[43.144657] R13: ffff96cfc3ce0000 R14: ffffb0dd4216bd08 R15: 0000000000000000
[43.145686] FS: 00007f7657dd68c0(0000) GS:ffff96d6df640000(0000) knlGS:0000000000000000
[43.146808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43.147584] CR2: 00007f7fe81bf5b0 CR3: 00000001093ee004 CR4: 0000000000370ee0
[43.148589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[43.149581] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000
---truncated--- |
