| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nimble is a package manager for the Nim programming language. In Nim release version before versions 1.2.10 and 1.4.4, Nimble doCmd is used in different places and can be leveraged to execute arbitrary commands. An attacker can craft a malicious entry in the packages.json package list to trigger code execution. |
| swagger-codegen is an open-source project which contains a template-driven engine to generate documentation, API clients and server stubs in different languages by parsing your OpenAPI / Swagger definition. In swagger-codegen before version 2.4.19, on Unix-Like systems, the system temporary directory is shared between all local users. When files/directories are created, the default `umask` settings for the process are respected. As a result, by default, most processes/apis will create files/directories with the permissions `-rw-r--r--` and `drwxr-xr-x` respectively, unless an API that explicitly sets safe file permissions is used. Because this vulnerability impacts generated code, the generated code will remain vulnerable until fixed manually! This vulnerability is fixed in version 2.4.19. Note this is a distinct vulnerability from CVE-2021-21363. |
| Products.GenericSetup is a mini-framework for expressing the configured state of a Zope Site as a set of filesystem artifacts. In Products.GenericSetup before version 2.1.1 there is an information disclosure vulnerability - anonymous visitors may view log and snapshot files generated by the Generic Setup Tool. The problem has been fixed in version 2.1.1. Depending on how you have installed Products.GenericSetup, you should change the buildout version pin to 2.1.1 and re-run the buildout, or if you used pip simply do pip install `"Products.GenericSetup>=2.1.1"`. |
| TYPO3 is an open source PHP based web content management system. In TYPO3 before versions 8.7.40, 9.5.25, 10.4.14, 11.1.1 due to improper input validation, attackers can by-pass restrictions of predefined options and submit arbitrary data in the Form Designer backend module of the Form Framework. In the default configuration of the Form Framework this allows attackers to explicitly allow arbitrary mime-types for file uploads - however, default _fileDenyPattern_ successfully blocked files like _.htaccess_ or _malicious.php_. Besides that, attackers can persist those files in any writable directory of the corresponding TYPO3 installation. A valid backend user account with access to the form module is needed to exploit this vulnerability. This is fixed in versions 8.7.40, 9.5.25, 10.4.14, 11.1.1. |
| Products.PluggableAuthService is a pluggable Zope authentication and authorization framework. In Products.PluggableAuthService before version 2.6.0 there is an information disclosure vulnerability - everyone can list the names of roles defined in the ZODB Role Manager plugin if the site uses this plugin. The problem has been fixed in version 2.6.0. Depending on how you have installed Products.PluggableAuthService, you should change the buildout version pin to 2.6.0 and re-run the buildout, or if you used pip simply do `pip install "Products.PluggableAuthService>=2.6.0"`. |
| In containerd (an industry-standard container runtime) before versions 1.3.10 and 1.4.4, containers launched through containerd's CRI implementation (through Kubernetes, crictl, or any other pod/container client that uses the containerd CRI service) that share the same image may receive incorrect environment variables, including values that are defined for other containers. If the affected containers have different security contexts, this may allow sensitive information to be unintentionally shared. If you are not using containerd's CRI implementation (through one of the mechanisms described above), you are not vulnerable to this issue. If you are not launching multiple containers or Kubernetes pods from the same image which have different environment variables, you are not vulnerable to this issue. If you are not launching multiple containers or Kubernetes pods from the same image in rapid succession, you have reduced likelihood of being vulnerable to this issue This vulnerability has been fixed in containerd 1.3.10 and containerd 1.4.4. Users should update to these versions. |
| Brave is an open source web browser with a focus on privacy and security. In Brave versions 1.17.73-1.20.103, the CNAME adblocking feature added in Brave 1.17.73 accidentally initiated DNS requests that bypassed the Brave Tor proxy. Users with adblocking enabled would leak DNS requests from Tor windows to their DNS provider. (DNS requests that were not initiated by CNAME adblocking would go through Tor as expected.) This is fixed in Brave version 1.20.108 |
| fastify-http-proxy is an npm package which is a fastify plugin for proxying your http requests to another server, with hooks. By crafting a specific URL, it is possible to escape the prefix of the proxied backend service. If the base url of the proxied server is `/pub/`, a user expect that accessing `/priv` on the target service would not be possible. In affected versions, it is possible. This is fixed in version 4.3.1. |
| fastify-reply-from is an npm package which is a fastify plugin to forward the current http request to another server. In fastify-reply-from before version 4.0.2, by crafting a specific URL, it is possible to escape the prefix of the proxied backend service. If the base url of the proxied server is "/pub/", a user expect that accessing "/priv" on the target service would not be possible. In affected versions, it is possible. This is fixed in version 4.0.2. |
| Wire is an open-source collaboration platform. In Wire for iOS (iPhone and iPad) before version 3.75 there is a vulnerability where the video capture isn't stopped in a scenario where a user first has their camera enabled and then disables it. It's a privacy issue because video is streamed to the call when the user believes it is disabled. It impacts all users in video calls. This is fixed in version 3.75. |
| Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty before version 4.1.59.Final there is a vulnerability on Unix-like systems involving an insecure temp file. When netty's multipart decoders are used local information disclosure can occur via the local system temporary directory if temporary storing uploads on the disk is enabled. On unix-like systems, the temporary directory is shared between all user. As such, writing to this directory using APIs that do not explicitly set the file/directory permissions can lead to information disclosure. Of note, this does not impact modern MacOS Operating Systems. The method "File.createTempFile" on unix-like systems creates a random file, but, by default will create this file with the permissions "-rw-r--r--". Thus, if sensitive information is written to this file, other local users can read this information. This is the case in netty's "AbstractDiskHttpData" is vulnerable. This has been fixed in version 4.1.59.Final. As a workaround, one may specify your own "java.io.tmpdir" when you start the JVM or use "DefaultHttpDataFactory.setBaseDir(...)" to set the directory to something that is only readable by the current user. |
| Schema-Inspector is an open-source tool to sanitize and validate JS objects (npm package schema-inspector). In before version 2.0.0, email address validation is vulnerable to a denial-of-service attack where some input (for example `a@0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.`) will freeze the program or web browser page executing the code. This affects any current schema-inspector users using any version to validate email addresses. Users who do not do email validation, and instead do other types of validation (like string min or max length, etc), are not affected. Users should upgrade to version 2.0.0, which uses a regex expression that isn't vulnerable to ReDoS. |
| Insufficient validation of untrusted input in Mojo in Google Chrome prior to 90.0.4430.72 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. |
| Insufficient data validation in QR scanner in Google Chrome on iOS prior to 90.0.4430.72 allowed an attacker displaying a QR code to perform domain spoofing via a crafted QR code. |
| Side-channel information leakage in autofill in Google Chrome prior to 89.0.4389.72 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. |
| Side-channel information leakage in Network Internals in Google Chrome prior to 89.0.4389.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. |
| Insufficient policy enforcement in extensions in Google Chrome prior to 88.0.4324.96 allowed a remote attacker to bypass site isolation via a crafted Chrome Extension. |
| Insufficient data validation in File System API in Google Chrome prior to 88.0.4324.96 allowed a remote attacker to bypass filesystem restrictions via a crafted HTML page. |
| In multiple managed switches by WAGO in different versions the activated directory listing provides an attacker with the index of the resources located inside the directory. |
| Exposure of sensitive information to an unauthorized actor vulnerability in KONICA MINOLTA bizhub series (bizhub C750i G00-35 and earlier, bizhub C650i/C550i/C450i G00-B6 and earlier, bizhub C360i/C300i/C250i G00-B6 and earlier, bizhub 750i/650i/550i/450i G00-37 and earlier, bizhub 360i/300i G00-33 and earlier, bizhub C287i/C257i/C227i G00-19 and earlier, bizhub 306i/266i/246i/226i G00-B6 and earlier, bizhub C759/C659 GC7-X8 and earlier, bizhub C658/C558/C458 GC7-X8 and earlier, bizhub 958/808/758 GC7-X8 and earlier, bizhub 658e/558e/458e GC7-X8 and earlier, bizhub C287/C227 GC7-X8 and earlier, bizhub 287/227 GC7-X8 and earlier, bizhub 368e/308e GC7-X8 and earlier, bizhub C368/C308/C258 GC9-X4 and earlier, bizhub 558/458/368/308 GC9-X4 and earlier, bizhub C754e/C654e GDQ-M0 and earlier, bizhub 754e/654e GDQ-M0 and earlier, bizhub C554e/C454e GDQ-M1 and earlier, bizhub C364e/C284e/C224e GDQ-M1 and earlier, bizhub 554e/454e/364e/284e/224e GDQ-M1 and earlier, bizhub C754/C654 C554/C454 GR1-M0 and earlier, bizhub C364/C284/C224 GR1-M0 and earlier, bizhub 754/654 GR1-M0 and earlier, bizhub C4050i/C3350i/C4000i/C3300i G00-B6 and earlier, bizhub C3320i G00-B6 and earlier, bizhub 4750i/4050i G00-22 and earlier, bizhub 4700i G00-22 and earlier, bizhub C3851FS/C3851/C3351 GC9-X4 and earlier, and bizhub 4752/4052 GC9-X4 and earlier) allows an attacker on the adjacent network to obtain the credentials if the destination information including credentials are registered in the address book via a specific SOAP message. |
