| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Access of Uninitialized Pointer vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved with BGP sharding configured allows an attacker triggering indirect next-hop updates, along with timing outside the attacker's control, to cause rpd to crash and restart, leading to a Denial of Service (DoS).
With BGP sharding enabled, triggering route resolution of an indirect next-hop (e.g., an IGP route change over which a BGP route gets resolved), may cause rpd to crash and restart. An attacker causing continuous IGP route churn, resulting in repeated route re-resolution, will increase the likelihood of triggering this issue, leading to a potentially extended DoS condition.
This issue affects:
Junos OS:
* all versions before 21.4R3-S6,
* from 22.1 before 22.1R3-S6,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3,
* from 23.2 before 23.2R2;
Junos OS Evolved:
* all versions before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-EVO,
* from 23.2 before 23.2R2-EVO.
Versions before Junos OS 21.3R1 and Junos OS Evolved 21.3R1-EVO are unaffected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: reject skb_copy(_expand) for fraglist GSO skbs
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment. |
| A use-after-free vulnerability was found in libxml2. This issue occurs when parsing XPath elements under certain circumstances when the XML schematron has the <sch:name path="..."/> schema elements. This flaw allows a malicious actor to craft a malicious XML document used as input for libxml, resulting in the program's crash using libxml or other possible undefined behaviors. |
| A mongoc_bulk_operation_t may read invalid memory if large options are passed. |
| Fastjson before 1.2.48 mishandles autoType because, when an @type key is in a JSON document, and the value of that key is the name of a Java class, there may be calls to certain public methods of that class. Depending on the behavior of those methods, there may be JNDI injection with an attacker-supplied payload located elsewhere in that JSON document. This was exploited in the wild in 2023 through 2025. NOTE: this issue exists because of an incomplete fix for CVE-2017-18349. Also, a later bypass is covered by CVE-2022-25845. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions 2.3.1.1 and below have an Out-of-bounds Read, Use of Out-of-range Pointer Offset and have Improper Input Validation in its CIccProfile::LoadTag function. This issue is fixed in version 2.3.1.2. |
| Memory corruption while processing a video session to set video parameters. |
| An issue was discovered in the Camera in Samsung Mobile Processor and Wearable Processor Exynos 1330, 1380, 1480, 2400, 1580, 2500. An invalid kernel address dereference in the issimian device driver leads to a denial of service. |
| Inclusion of Functionality from Untrusted Control Sphere vulnerability in Mitsubishi Electric GENESIS64 versions 10.97 to 10.97.1, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97 to 10.97.1, Mitsubishi Electric ICONICS Suite versions 10.97 to 10.97.1, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite versions 10.97 to 10.97.1, and Mitsubishi Electric MC Works64 versions 4.04E and prior allows an unauthenticated attacker to execute an arbitrary malicious code by leading a user to load a monitoring screen file including malicious script codes. |
| FIBARO System Home Center 5.021 contains a remote file inclusion vulnerability in the undocumented proxy API that allows attackers to include arbitrary client-side scripts. Attackers can exploit the 'url' GET parameter to inject malicious JavaScript and potentially hijack user sessions or manipulate page content. |
| For a brief summary of Xapi terminology, see:
https://xapi-project.github.io/xen-api/overview.html#object-model-overview
Xapi contains functionality to backup and restore metadata about Virtual
Machines and Storage Repositories (SRs).
The metadata itself is stored in a Virtual Disk Image (VDI) inside an
SR. This is used for two purposes; a general backup of metadata
(e.g. to recover from a host failure if the filer is still good), and
Portable SRs (e.g. using an external hard drive to move VMs to another
host).
Metadata is only restored as an explicit administrator action, but
occurs in cases where the host has no information about the SR, and must
locate the metadata VDI in order to retrieve the metadata.
The metadata VDI is located by searching (in UUID alphanumeric order)
each VDI, mounting it, and seeing if there is a suitable metadata file
present. The first matching VDI is deemed to be the metadata VDI, and
is restored from.
In the general case, the content of VDIs are controlled by the VM owner,
and should not be trusted by the host administrator.
A malicious guest can manipulate its disk to appear to be a metadata
backup.
A guest cannot choose the UUIDs of its VDIs, but a guest with one disk
has a 50% chance of sorting ahead of the legitimate metadata backup. A
guest with two disks has a 75% chance, etc. |
| In Eclipse JGit versions 7.2.0.202503040940-r and older, the ManifestParser class used by the repo command and the AmazonS3 class used to implement the experimental amazons3 git transport protocol allowing to store git pack files in an Amazon S3 bucket, are vulnerable to XML External Entity (XXE) attacks when parsing XML files. This vulnerability can lead to information disclosure, denial of service, and other security issues. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit
Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.
The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. |
| In the Linux kernel, the following vulnerability has been resolved:
um: line: always fill *error_out in setup_one_line()
The pointer isn't initialized by callers, but I have
encountered cases where it's still printed; initialize
it in all possible cases in setup_one_line(). |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices". |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix crash while reading debugfs attribute
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d |
| n8n is an open source workflow automation platform. Versions 0.123.1 through 1.119.1 do not have adequate protections to prevent RCE through the project's pre-commit hooks. The Add Config operation allows workflows to set arbitrary Git configuration values, including core.hooksPath, which can point to a malicious Git hook that executes arbitrary commands on the n8n host during subsequent Git operations. Exploitation requires the ability to create or modify an n8n workflow using the Git node. This issue is fixed in version 1.119.2. Workarounds include excluding the Git Node (Docs) and avoiding cloning or interacting with untrusted repositories using the Git Node. |
| In AzeoTech DAQFactory release 20.7 (Build 2555), an Access of Uninitialized Pointer vulnerability can be exploited by an attacker which can lead to arbitrary code execution. |
| FACTION is a PenTesting Report Generation and Collaboration Framework. Prior to version 1.7.1, an extension execution path in Faction’s extension framework permits untrusted extension code to execute arbitrary system commands on the server when a lifecycle hook is invoked, resulting in remote code execution (RCE) on the host running Faction. Due to a missing authentication check on the /portal/AppStoreDashboard endpoint, an attacker can access the extension management UI and upload a malicious extension without any authentication, making this vulnerability exploitable by unauthenticated users. This issue has been patched in version 1.7.1. |
| The Static Asset API in Mintlify Platform before 2025-11-15 allows remote attackers to inject arbitrary web script or HTML via the subdomain parameter because any tenant's assets can be served on any other tenant's documentation site. |
