| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
If migration succeeded, we called
folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the
old to the new folio. This will set memcg_data of the old folio to 0.
Similarly, if migration failed, memcg_data of the dst folio is left unset.
If we call folio_putback_lru() on such folios (memcg_data == 0), we will
add the folio to be freed to the LRU, making memcg code unhappy. Running
the hmm selftests:
# ./hmm-tests
...
# RUN hmm.hmm_device_private.migrate ...
[ 102.078007][T14893] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff27d200 pfn:0x13cc00
[ 102.079974][T14893] anon flags: 0x17ff00000020018(uptodate|dirty|swapbacked|node=0|zone=2|lastcpupid=0x7ff)
[ 102.082037][T14893] raw: 017ff00000020018 dead000000000100 dead000000000122 ffff8881353896c9
[ 102.083687][T14893] raw: 00000007ff27d200 0000000000000000 00000001ffffffff 0000000000000000
[ 102.085331][T14893] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 102.087230][T14893] ------------[ cut here ]------------
[ 102.088279][T14893] WARNING: CPU: 0 PID: 14893 at ./include/linux/memcontrol.h:726 folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.090478][T14893] Modules linked in:
[ 102.091244][T14893] CPU: 0 UID: 0 PID: 14893 Comm: hmm-tests Not tainted 6.13.0-09623-g6c216bc522fd #151
[ 102.093089][T14893] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
[ 102.094848][T14893] RIP: 0010:folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.096104][T14893] Code: ...
[ 102.099908][T14893] RSP: 0018:ffffc900236c37b0 EFLAGS: 00010293
[ 102.101152][T14893] RAX: 0000000000000000 RBX: ffffea0004f30000 RCX: ffffffff8183f426
[ 102.102684][T14893] RDX: ffff8881063cb880 RSI: ffffffff81b8117f RDI: ffff8881063cb880
[ 102.104227][T14893] RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
[ 102.105757][T14893] R10: 0000000000000001 R11: 0000000000000002 R12: ffffc900236c37d8
[ 102.107296][T14893] R13: ffff888277a2bcb0 R14: 000000000000001f R15: 0000000000000000
[ 102.108830][T14893] FS: 00007ff27dbdd740(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
[ 102.110643][T14893] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.111924][T14893] CR2: 00007ff27d400000 CR3: 000000010866e000 CR4: 0000000000750ef0
[ 102.113478][T14893] PKRU: 55555554
[ 102.114172][T14893] Call Trace:
[ 102.114805][T14893] <TASK>
[ 102.115397][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.116547][T14893] ? __warn.cold+0x110/0x210
[ 102.117461][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.118667][T14893] ? report_bug+0x1b9/0x320
[ 102.119571][T14893] ? handle_bug+0x54/0x90
[ 102.120494][T14893] ? exc_invalid_op+0x17/0x50
[ 102.121433][T14893] ? asm_exc_invalid_op+0x1a/0x20
[ 102.122435][T14893] ? __wake_up_klogd.part.0+0x76/0xd0
[ 102.123506][T14893] ? dump_page+0x4f/0x60
[ 102.124352][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.125500][T14893] folio_batch_move_lru+0xd4/0x200
[ 102.126577][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.127505][T14893] __folio_batch_add_and_move+0x391/0x720
[ 102.128633][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.129550][T14893] folio_putback_lru+0x16/0x80
[ 102.130564][T14893] migrate_device_finalize+0x9b/0x530
[ 102.131640][T14893] dmirror_migrate_to_device.constprop.0+0x7c5/0xad0
[ 102.133047][T14893] dmirror_fops_unlocked_ioctl+0x89b/0xc80
Likely, nothing else goes wrong: putting the last folio reference will
remove the folio from the LRU again. So besides memcg complaining, adding
the folio to be freed to the LRU is just an unnecessary step.
The new flow resembles what we have in migrate_folio_move(): add the dst
to the lru, rem
---truncated--- |
| Use after free in some Zoom Workplace Apps and SDKs may allow an authenticated user to conduct a denial of service via network access. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Handle dml allocation failure to avoid crash
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
(cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c) |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix missing locking causing hanging calls
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: do not leave a dangling sk pointer in __smc_create()
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:
smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_create net/socket.c:1616 [inline]
__sys_socket_create net/socket.c:1653 [inline]
__sys_socket+0x150/0x3c0 net/socket.c:1700
__do_sys_socket net/socket.c:1714 [inline]
__se_sys_socket net/socket.c:1712 [inline]
For reference, see commit 2d859aff775d ("Merge branch
'do-not-leave-dangling-sk-pointers-in-pf-create-functions'") |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: avoid vport access in idpf_get_link_ksettings
When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.
To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Disable page allocation in task_tick_mm_cid()
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func()
'new_map' is allocated using devm_* which takes care of freeing the
allocated data on device removal, call to
.dt_free_map = pinconf_generic_dt_free_map
double frees the map as pinconf_generic_dt_free_map() calls
pinctrl_utils_free_map().
Fix this by using kcalloc() instead of auto-managed devm_kcalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: add release function for struct device
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double free of TCP_Server_Info::hostname
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
RIP: 0010:__slab_free+0x223/0x3c0
Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89
1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f>
0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80
RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246
RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068
RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400
RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000
R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500
R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068
FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000)
000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4:
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __reconnect_target_unlocked+0x3e/0x160 [cifs]
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0xce/0x120
? __slab_free+0x223/0x3c0
? do_error_trap+0x65/0x80
? __slab_free+0x223/0x3c0
? exc_invalid_op+0x4e/0x70
? __slab_free+0x223/0x3c0
? asm_exc_invalid_op+0x16/0x20
? __slab_free+0x223/0x3c0
? extract_hostname+0x5c/0xa0 [cifs]
? extract_hostname+0x5c/0xa0 [cifs]
? __kmalloc+0x4b/0x140
__reconnect_target_unlocked+0x3e/0x160 [cifs]
reconnect_dfs_server+0x145/0x430 [cifs]
cifs_handle_standard+0x1ad/0x1d0 [cifs]
cifs_demultiplex_thread+0x592/0x730 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0xdd/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix handling of plane refcount
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix warning when unbinding
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath12k_pci),
and we get:
WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80
Call Trace:
free_large_kmalloc
ath12k_dp_free
ath12k_core_deinit
ath12k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential bit_17 double-free
A userspace with multiple threads racing I915_GEM_SET_TILING to set the
tiling to I915_TILING_NONE could trigger a double free of the bit_17
bitmask. (Or conversely leak memory on the transition to tiled.) Move
allocation/free'ing of the bitmask within the section protected by the
obj lock.
[tursulin: Correct fixes tag and added cc stable.]
(cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e) |
| In the Linux kernel, the following vulnerability has been resolved:
HID: elan: Fix potential double free in elan_input_configured
'input' is a managed resource allocated with devm_input_allocate_device(),
so there is no need to call input_free_device() explicitly or
there will be a double free.
According to the doc of devm_input_allocate_device():
* Managed input devices do not need to be explicitly unregistered or
* freed as it will be done automatically when owner device unbinds from
* its driver (or binding fails). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ocxl: fix possible double free in ocxl_file_register_afu
info_release() will be called in device_unregister() when info->dev's
reference count is 0. So there is no need to call ocxl_afu_put() and
kfree() again.
Fix this by adding free_minor() and return to err_unregister error path. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix potential double free in create_var_ref()
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref(). |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: mtk_scp: Fix a potential double free
'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need
to free it explicitly in the remove function. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix double free of io_acct_set bioset
Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix potential double free on mesh join
While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:
ieee80211_leave_mesh()
-> kfree(sdata->u.mesh.ie);
...
ieee80211_join_mesh()
-> copy_mesh_setup()
-> old_ie = ifmsh->ie;
-> kfree(old_ie);
This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:
$ iw dev mesh0 mesh leave
$ iw dev mesh0 mesh join my-mesh
Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.
The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.
Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix double free during GPU reset on DC streams
[Why]
The issue only occurs during the GPU reset code path.
We first backup the current state prior to commiting 0 streams
internally from DM to DC. This state backup contains valid link
encoder assignments.
DC will clear the link encoder assignments as part of current state
(but not the backup, since it was a copied before the commit) and
free the extra stream reference it held.
DC requires that the link encoder assignments remain cleared/invalid
prior to commiting. Since the backup still has valid assignments we
call the interface post reset to clear them. This routine also
releases the extra reference that the link encoder interface held -
resulting in a double free (and eventually a NULL pointer dereference).
[How]
We'll have to do a full DC commit anyway after GPU reset because
the stream count previously went to 0.
We don't need to retain the assignment that we had backed up, so
just copy off of the now clean current state assignment after the
reset has occcurred with the new link_enc_cfg_copy() interface. |
