| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in is_valid_oplock_break()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in smb2_is_network_name_deleted()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Use device rbtree in iopf reporting path
The existing I/O page fault handler currently locates the PCI device by
calling pci_get_domain_bus_and_slot(). This function searches the list
of all PCI devices until the desired device is found. To improve lookup
efficiency, replace it with device_rbtree_find() to search the device
within the probed device rbtree.
The I/O page fault is initiated by the device, which does not have any
synchronization mechanism with the software to ensure that the device
stays in the probed device tree. Theoretically, a device could be released
by the IOMMU subsystem after device_rbtree_find() and before
iopf_get_dev_fault_param(), which would cause a use-after-free problem.
Add a mutex to synchronize the I/O page fault reporting path and the IOMMU
release device path. This lock doesn't introduce any performance overhead,
as the conflict between I/O page fault reporting and device releasing is
very rare. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
When ncm function is working and then stop usb0 interface for link down,
eth_stop() is called. At this piont, accidentally if usb transport error
should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.
After that, ncm_disable() is called to disable for ncm unbind
but gether_disconnect() is never called since 'in_ep' is not enabled.
As the result, ncm object is released in ncm unbind
but 'dev->port_usb' associated to 'ncm->port' is not NULL.
And when ncm bind again to recover netdev, ncm object is reallocated
but usb0 interface is already associated to previous released ncm object.
Therefore, once usb0 interface is up and eth_start_xmit() is called,
released ncm object is dereferrenced and it might cause use-after-free memory.
[function unlink via configfs]
usb0: eth_stop dev->port_usb=ffffff9b179c3200
--> error happens in usb_ep_enable().
NCM: ncm_disable: ncm=ffffff9b179c3200
--> no gether_disconnect() since ncm->port.in_ep->enabled is false.
NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200
NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm
[function link via configfs]
NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000
NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000
NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0
usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm
usb0: eth_start dev->port_usb=ffffff9b179c3200 <--
eth_start_xmit()
--> dev->wrap()
Unable to handle kernel paging request at virtual address dead00000000014f
This patch addresses the issue by checking if 'ncm->netdev' is not NULL at
ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'.
It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect
rather than check 'ncm->port.in_ep->enabled' since it might not be enabled
but the gether connection might be established. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: fix reference counting on zcrypt card objects
Tests with hot-plugging crytpo cards on KVM guests with debug
kernel build revealed an use after free for the load field of
the struct zcrypt_card. The reason was an incorrect reference
handling of the zcrypt card object which could lead to a free
of the zcrypt card object while it was still in use.
This is an example of the slab message:
kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b
kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43
kernel: kmalloc_trace+0x3f2/0x470
kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt]
kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4]
kernel: ap_device_probe+0x15c/0x290
kernel: really_probe+0xd2/0x468
kernel: driver_probe_device+0x40/0xf0
kernel: __device_attach_driver+0xc0/0x140
kernel: bus_for_each_drv+0x8c/0xd0
kernel: __device_attach+0x114/0x198
kernel: bus_probe_device+0xb4/0xc8
kernel: device_add+0x4d2/0x6e0
kernel: ap_scan_adapter+0x3d0/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43
kernel: kfree+0x37e/0x418
kernel: zcrypt_card_put+0x54/0x80 [zcrypt]
kernel: ap_device_remove+0x4c/0xe0
kernel: device_release_driver_internal+0x1c4/0x270
kernel: bus_remove_device+0x100/0x188
kernel: device_del+0x164/0x3c0
kernel: device_unregister+0x30/0x90
kernel: ap_scan_adapter+0xc8/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: kthread+0x150/0x168
kernel: __ret_from_fork+0x3c/0x58
kernel: ret_from_fork+0xa/0x30
kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff)
kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88
kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........
kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk.
kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........
kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2
kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux)
kernel: Call Trace:
kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120
kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140
kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8
kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8
kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0
kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8
kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8
kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590
kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0
kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0
kernel:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in cifs_debug_files_proc_show()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix fortify source warning while accessing Eth segment
------------[ cut here ]------------
memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2)
WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy
[last unloaded: mlx_compat(OE)]
CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7
RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8
R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80
FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x72/0x90
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
? __warn+0x8d/0x160
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
? report_bug+0x1bb/0x1d0
? handle_bug+0x46/0x90
? exc_invalid_op+0x19/0x80
? asm_exc_invalid_op+0x1b/0x20
? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib]
ipoib_send+0x2ec/0x770 [ib_ipoib]
ipoib_start_xmit+0x5a0/0x770 [ib_ipoib]
dev_hard_start_xmit+0x8e/0x1e0
? validate_xmit_skb_list+0x4d/0x80
sch_direct_xmit+0x116/0x3a0
__dev_xmit_skb+0x1fd/0x580
__dev_queue_xmit+0x284/0x6b0
? _raw_spin_unlock_irq+0xe/0x50
? __flush_work.isra.0+0x20d/0x370
? push_pseudo_header+0x17/0x40 [ib_ipoib]
neigh_connected_output+0xcd/0x110
ip_finish_output2+0x179/0x480
? __smp_call_single_queue+0x61/0xa0
__ip_finish_output+0xc3/0x190
ip_finish_output+0x2e/0xf0
ip_output+0x78/0x110
? __pfx_ip_finish_output+0x10/0x10
ip_local_out+0x64/0x70
__ip_queue_xmit+0x18a/0x460
ip_queue_xmit+0x15/0x30
__tcp_transmit_skb+0x914/0x9c0
tcp_write_xmit+0x334/0x8d0
tcp_push_one+0x3c/0x60
tcp_sendmsg_locked+0x2e1/0xac0
tcp_sendmsg+0x2d/0x50
inet_sendmsg+0x43/0x90
sock_sendmsg+0x68/0x80
sock_write_iter+0x93/0x100
vfs_write+0x326/0x3c0
ksys_write+0xbd/0xf0
? do_syscall_64+0x69/0x90
__x64_sys_write+0x19/0x30
do_syscall_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: net: fix use after free in fwnet_finish_incoming_packet()
The netif_rx() function frees the skb so we can't dereference it to
save the skb->len. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Wait for io return on terminate rport
System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.
Wait for IO's to return to upper layer before resources are freed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free
Fix potential use-after-free in l2cap_le_command_rej. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write
During the sysfs firmware write process, a use-after-free read warning is
logged from the lpfc_wr_object() routine:
BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc]
Use-after-free read at 0x0000000000cf164d (in kfence-#111):
lpfc_wr_object+0x235/0x310 [lpfc]
lpfc_write_firmware.cold+0x206/0x30d [lpfc]
lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc]
lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc]
kernfs_fop_write_iter+0x121/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1ef/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The driver accessed wr_object pointer data, which was initialized into
mailbox payload memory, after the mailbox object was released back to the
mailbox pool.
Fix by moving the mailbox free calls to the end of the routine ensuring
that we don't reference internal mailbox memory after release. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.
If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
Bug report and analysis from Ding Hui.
During iSCSI session logout, if another task accesses the shost ipaddress
attr, we can get a KASAN UAF report like this:
[ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0
[ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088
[ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3
[ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
[ 276.944470] Call Trace:
[ 276.944943] <TASK>
[ 276.945397] dump_stack_lvl+0x34/0x48
[ 276.945887] print_address_description.constprop.0+0x86/0x1e7
[ 276.946421] print_report+0x36/0x4f
[ 276.947358] kasan_report+0xad/0x130
[ 276.948234] kasan_check_range+0x35/0x1c0
[ 276.948674] _raw_spin_lock_bh+0x78/0xe0
[ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp]
[ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi]
[ 276.952185] dev_attr_show+0x3f/0x80
[ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0
[ 276.953401] seq_read_iter+0x402/0x1020
[ 276.954260] vfs_read+0x532/0x7b0
[ 276.955113] ksys_read+0xed/0x1c0
[ 276.955952] do_syscall_64+0x38/0x90
[ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 276.956769] RIP: 0033:0x7f5d3a679222
[ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222
[ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003
[ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000
[ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000
[ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58
[ 276.960536] </TASK>
[ 276.961357] Allocated by task 2209:
[ 276.961756] kasan_save_stack+0x1e/0x40
[ 276.962170] kasan_set_track+0x21/0x30
[ 276.962557] __kasan_kmalloc+0x7e/0x90
[ 276.962923] __kmalloc+0x5b/0x140
[ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi]
[ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi]
[ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp]
[ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi]
[ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi]
[ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[ 276.965546] netlink_unicast+0x4d5/0x7b0
[ 276.965905] netlink_sendmsg+0x78d/0xc30
[ 276.966236] sock_sendmsg+0xe5/0x120
[ 276.966576] ____sys_sendmsg+0x5fe/0x860
[ 276.966923] ___sys_sendmsg+0xe0/0x170
[ 276.967300] __sys_sendmsg+0xc8/0x170
[ 276.967666] do_syscall_64+0x38/0x90
[ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 276.968773] Freed by task 2209:
[ 276.969111] kasan_save_stack+0x1e/0x40
[ 276.969449] kasan_set_track+0x21/0x30
[ 276.969789] kasan_save_free_info+0x2a/0x50
[ 276.970146] __kasan_slab_free+0x106/0x190
[ 276.970470] __kmem_cache_free+0x133/0x270
[ 276.970816] device_release+0x98/0x210
[ 276.971145] kobject_cleanup+0x101/0x360
[ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi]
[ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp]
[ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi]
[ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[ 276.972808] netlink_unicast+0x4d5/0x7b0
[ 276.973201] netlink_sendmsg+0x78d/0xc30
[ 276.973544] sock_sendmsg+0xe5/0x120
[ 276.973864] ____sys_sendmsg+0x5fe/0x860
[ 276.974248] ___sys_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails,
userspace could be accessing the host's ipaddress attr. If we then free the
session via iscsi_session_teardown() while userspace is still accessing the
session we will hit a use after free bug.
Set the tcp_sw_host->session after we have completed session creation and
can no longer fail. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential deadlock when releasing mids
All release_mid() callers seem to hold a reference of @mid so there is
no need to call kref_put(&mid->refcount, __release_mid) under
@server->mid_lock spinlock. If they don't, then an use-after-free bug
would have occurred anyways.
By getting rid of such spinlock also fixes a potential deadlock as
shown below
CPU 0 CPU 1
------------------------------------------------------------------
cifs_demultiplex_thread() cifs_debug_data_proc_show()
release_mid()
spin_lock(&server->mid_lock);
spin_lock(&cifs_tcp_ses_lock)
spin_lock(&server->mid_lock)
__release_mid()
smb2_find_smb_tcon()
spin_lock(&cifs_tcp_ses_lock) *deadlock* |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free bug in cifs_debug_data_proc_show()
Skip SMB sessions that are being teared down
(e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show()
to avoid use-after-free in @ses.
This fixes the following GPF when reading from /proc/fs/cifs/DebugData
while mounting and umounting
[ 816.251274] general protection fault, probably for non-canonical
address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI
...
[ 816.260138] Call Trace:
[ 816.260329] <TASK>
[ 816.260499] ? die_addr+0x36/0x90
[ 816.260762] ? exc_general_protection+0x1b3/0x410
[ 816.261126] ? asm_exc_general_protection+0x26/0x30
[ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs]
[ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs]
[ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs]
[ 816.262689] ? seq_read_iter+0x379/0x470
[ 816.262995] seq_read_iter+0x118/0x470
[ 816.263291] proc_reg_read_iter+0x53/0x90
[ 816.263596] ? srso_alias_return_thunk+0x5/0x7f
[ 816.263945] vfs_read+0x201/0x350
[ 816.264211] ksys_read+0x75/0x100
[ 816.264472] do_syscall_64+0x3f/0x90
[ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 816.265135] RIP: 0033:0x7fd5e669d381 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free in smb2_query_info_compound()
The following UAF was triggered when running fstests generic/072 with
KASAN enabled against Windows Server 2022 and mount options
'multichannel,max_channels=2,vers=3.1.1,mfsymlinks,noperm'
BUG: KASAN: slab-use-after-free in smb2_query_info_compound+0x423/0x6d0 [cifs]
Read of size 8 at addr ffff888014941048 by task xfs_io/27534
CPU: 0 PID: 27534 Comm: xfs_io Not tainted 6.6.0-rc7 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack_lvl+0x4a/0x80
print_report+0xcf/0x650
? srso_alias_return_thunk+0x5/0x7f
? srso_alias_return_thunk+0x5/0x7f
? __phys_addr+0x46/0x90
kasan_report+0xda/0x110
? smb2_query_info_compound+0x423/0x6d0 [cifs]
? smb2_query_info_compound+0x423/0x6d0 [cifs]
smb2_query_info_compound+0x423/0x6d0 [cifs]
? __pfx_smb2_query_info_compound+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0x7f
? __stack_depot_save+0x39/0x480
? kasan_save_stack+0x33/0x60
? kasan_set_track+0x25/0x30
? ____kasan_slab_free+0x126/0x170
smb2_queryfs+0xc2/0x2c0 [cifs]
? __pfx_smb2_queryfs+0x10/0x10 [cifs]
? __pfx___lock_acquire+0x10/0x10
smb311_queryfs+0x210/0x220 [cifs]
? __pfx_smb311_queryfs+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0x7f
? __lock_acquire+0x480/0x26c0
? lock_release+0x1ed/0x640
? srso_alias_return_thunk+0x5/0x7f
? do_raw_spin_unlock+0x9b/0x100
cifs_statfs+0x18c/0x4b0 [cifs]
statfs_by_dentry+0x9b/0xf0
fd_statfs+0x4e/0xb0
__do_sys_fstatfs+0x7f/0xe0
? __pfx___do_sys_fstatfs+0x10/0x10
? srso_alias_return_thunk+0x5/0x7f
? lockdep_hardirqs_on_prepare+0x136/0x200
? srso_alias_return_thunk+0x5/0x7f
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Allocated by task 27534:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x8f/0xa0
open_cached_dir+0x71b/0x1240 [cifs]
smb2_query_info_compound+0x5c3/0x6d0 [cifs]
smb2_queryfs+0xc2/0x2c0 [cifs]
smb311_queryfs+0x210/0x220 [cifs]
cifs_statfs+0x18c/0x4b0 [cifs]
statfs_by_dentry+0x9b/0xf0
fd_statfs+0x4e/0xb0
__do_sys_fstatfs+0x7f/0xe0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 27534:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x50
____kasan_slab_free+0x126/0x170
slab_free_freelist_hook+0xd0/0x1e0
__kmem_cache_free+0x9d/0x1b0
open_cached_dir+0xff5/0x1240 [cifs]
smb2_query_info_compound+0x5c3/0x6d0 [cifs]
smb2_queryfs+0xc2/0x2c0 [cifs]
This is a race between open_cached_dir() and cached_dir_lease_break()
where the cache entry for the open directory handle receives a lease
break while creating it. And before returning from open_cached_dir(),
we put the last reference of the new @cfid because of
!@cfid->has_lease.
Besides the UAF, while running xfstests a lot of missed lease breaks
have been noticed in tests that run several concurrent statfs(2) calls
on those cached fids
CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
CIFS: VFS: \\w22-root1.gandalf.test smb buf 00000000715bfe83 len 108
CIFS: VFS: Dump pending requests:
CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame...
CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1...
CIFS: VFS: \\w22-root1.gandalf.test smb buf 000000005aa7316e len 108
...
To fix both, in open_cached_dir() ensure that @cfid->has_lease is set
right before sending out compounded request so that any potential
lease break will be get processed by demultiplex thread while we're
still caching @cfid. And, if open failed for some reason, re-check
@cfid->has_lease to decide whether or not put lease reference. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix use-after-free in rdata->read_into_pages()
When the network status is unstable, use-after-free may occur when
read data from the server.
BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0
Call Trace:
<TASK>
dump_stack_lvl+0x38/0x4c
print_report+0x16f/0x4a6
kasan_report+0xb7/0x130
readpages_fill_pages+0x14c/0x7e0
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
</TASK>
Allocated by task 2535:
kasan_save_stack+0x22/0x50
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x82/0x90
cifs_readdata_direct_alloc+0x2c/0x110
cifs_readdata_alloc+0x2d/0x60
cifs_readahead+0x393/0xfe0
read_pages+0x12f/0x470
page_cache_ra_unbounded+0x1b1/0x240
filemap_get_pages+0x1c8/0x9a0
filemap_read+0x1c0/0x540
cifs_strict_readv+0x21b/0x240
vfs_read+0x395/0x4b0
ksys_read+0xb8/0x150
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 79:
kasan_save_stack+0x22/0x50
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2e/0x50
__kasan_slab_free+0x10e/0x1a0
__kmem_cache_free+0x7a/0x1a0
cifs_readdata_release+0x49/0x60
process_one_work+0x46c/0x760
worker_thread+0x2a4/0x6f0
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
Last potentially related work creation:
kasan_save_stack+0x22/0x50
__kasan_record_aux_stack+0x95/0xb0
insert_work+0x2b/0x130
__queue_work+0x1fe/0x660
queue_work_on+0x4b/0x60
smb2_readv_callback+0x396/0x800
cifs_abort_connection+0x474/0x6a0
cifs_reconnect+0x5cb/0xa50
cifs_readv_from_socket.cold+0x22/0x6c
cifs_read_page_from_socket+0xc1/0x100
readpages_fill_pages.cold+0x2f/0x46
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
The following function calls will cause UAF of the rdata pointer.
readpages_fill_pages
cifs_read_page_from_socket
cifs_readv_from_socket
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->callback() --> smb2_readv_callback
queue_work(&rdata->work) # if the worker completes first,
# the rdata is freed
cifs_readv_complete
kref_put
cifs_readdata_release
kfree(rdata)
return rdata->... # UAF in readpages_fill_pages()
Similarly, this problem also occurs in the uncache_fill_pages().
Fix this by adjusts the order of condition judgment in the return
statement. |
