| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OS Command Injection vulnerability in Ruijie X30-PRO X30-PRO-V1_09241521 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_sta/nbr_cwmp.lua. |
| OS Command Injection vulnerability in Ruijie M18 EW_3.0(1)B11P226_M18_10223116 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_config/config_retain.lua. |
| OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR860 allowing attackers to execute arbitrary commands via a crafted POST request to the network_set_wan_conf in file /usr/lib/lua/luci/controller/admin/netport.lua. |
| The Super Testimonials plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'st_user_title' parameter in all versions up to, and including, 4.0.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability was detected in D-Link DIR-605 202WWB03. Affected by this issue is some unknown functionality of the component Firmware Update Service. Performing manipulation results in command injection. The attack can be initiated remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| WordPress is an open publishing platform for the Web. It's possible for a file of a type other than a zip file to be submitted as a new plugin by an administrative user on the Plugins -> Add New -> Upload Plugin screen in WordPress. If FTP credentials are requested for installation (in order to move the file into place outside of the `uploads` directory) then the uploaded file remains temporary available in the Media Library despite it not being allowed. If the `DISALLOW_FILE_EDIT` constant is set to `true` on the site _and_ FTP credentials are required when uploading a new theme or plugin, then this technically allows an RCE when the user would otherwise have no means of executing arbitrary PHP code. This issue _only_ affects Administrator level users on single site installations, and Super Admin level users on Multisite installations where it's otherwise expected that the user does not have permission to upload or execute arbitrary PHP code. Lower level users are not affected. Sites where the `DISALLOW_FILE_MODS` constant is set to `true` are not affected. Sites where an administrative user either does not need to enter FTP credentials or they have access to the valid FTP credentials, are not affected. The issue was fixed in WordPress 6.4.3 on January 30, 2024 and backported to versions 6.3.3, 6.2.4, 6.1.5, 6.0.7, 5.9.9, 5.8.9, 5.7.11, 5.6.13, 5.5.14, 5.4.15, 5.3.17, 5.2.20, 5.1.18, 5.0.21, 4.9.25, 2.8.24, 4.7.28, 4.6.28, 4.5.31, 4.4.32, 4.3.33, 4.2.37, and 4.1.40. A workaround is available. If the `DISALLOW_FILE_MODS` constant is defined as `true` then it will not be possible for any user to upload a plugin and therefore this issue will not be exploitable.
|
| Redon Hub is a Roblox Product Delivery Bot, also known as a Hub. In all hubs before version 1.0.2, all commands are capable of being ran by all users, including admin commands. This allows users to receive products for free and delete/create/update products/tags/etc. The only non-affected command is `/products admin clear` as this was already programmed for bot owners only. All users should upgrade to version 1.0.2 to receive a patch. |
| Improper access control in some Intel(R) Ethernet Adapters and Intel(R) Ethernet Controller I225 Manageability firmware may allow a privileged user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: bno055: fix OOB access of hw_xlate array
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length. |
| Unauth. Reflected Cross-Site Scripting vulnerability in Daniel Powney Multi Rating plugin <= 5.0.5 versions. |
| httparty is an API tool. In versions 0.23.2 and prior, httparty is vulnerable to SSRF. This issue can pose a risk of leaking API keys, and it can also allow third parties to issue requests to internal servers. This issue has been patched via commit 0529bcd. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: aio_iiro_16: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl812: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY mode
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode. |
| Cybersecurity Nozomi Networks Labs, a specialized security company focused on Industrial Control Systems (ICS) and OT/IoT security, has discovered a vulnerability in Device Manager that a hardcoded encryption key for sensitive information. An attacker can use key to decrypt sensitive information. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: nbpfaxi: Fix memory corruption in probe()
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Validate the size of the received input buffer
Add buffer_recv_size to store the size of the received bytes.
Validate buffer_recv_size in send_usb_cmd(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: plug races between subflow fail and subflow creation
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write. |
| Buffer Overflow Vulnerability in libcdio in commit 4c840665 allows an attacker to execute arbitrary code via a crafted ISO 9660 image file. |
