| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: fix folio unpinning
syzbot complains about an unmapping failure:
[ 108.070381][ T14] kernel BUG at mm/gup.c:71!
[ 108.070502][ T14] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 108.123672][ T14] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250221-8.fc42 02/21/2025
[ 108.127458][ T14] Workqueue: iou_exit io_ring_exit_work
[ 108.174205][ T14] Call trace:
[ 108.175649][ T14] sanity_check_pinned_pages+0x7cc/0x7d0 (P)
[ 108.178138][ T14] unpin_user_page+0x80/0x10c
[ 108.180189][ T14] io_release_ubuf+0x84/0xf8
[ 108.182196][ T14] io_free_rsrc_node+0x250/0x57c
[ 108.184345][ T14] io_rsrc_data_free+0x148/0x298
[ 108.186493][ T14] io_sqe_buffers_unregister+0x84/0xa0
[ 108.188991][ T14] io_ring_ctx_free+0x48/0x480
[ 108.191057][ T14] io_ring_exit_work+0x764/0x7d8
[ 108.193207][ T14] process_one_work+0x7e8/0x155c
[ 108.195431][ T14] worker_thread+0x958/0xed8
[ 108.197561][ T14] kthread+0x5fc/0x75c
[ 108.199362][ T14] ret_from_fork+0x10/0x20
We can pin a tail page of a folio, but then io_uring will try to unpin
the head page of the folio. While it should be fine in terms of keeping
the page actually alive, mm folks say it's wrong and triggers a debug
warning. Use unpin_user_folio() instead of unpin_user_page*.
[axboe: adapt to current tree, massage commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a7xx: Call CP_RESET_CONTEXT_STATE
Calling this packet is necessary when we switch contexts because there
are various pieces of state used by userspace to synchronize between BR
and BV that are persistent across submits and we need to make sure that
they are in a "safe" state when switching contexts. Otherwise a
userspace submission in one context could cause another context to
function incorrectly and hang, effectively a denial of service (although
without leaking data). This was missed during initial a7xx bringup.
Patchwork: https://patchwork.freedesktop.org/patch/654924/ |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
ERROR INFO:
CPU 25 Unable to handle kernel paging request at virtual address 0x0
...
Call Trace:
[<900000000023c30c>] huge_pte_offset+0x3c/0x58
[<900000000057fd4c>] hugetlb_follow_page_mask+0x74/0x438
[<900000000051fee8>] __get_user_pages+0xe0/0x4c8
[<9000000000522414>] faultin_page_range+0x84/0x380
[<9000000000564e8c>] madvise_vma_behavior+0x534/0xa48
[<900000000056689c>] do_madvise+0x1bc/0x3e8
[<9000000000566df4>] sys_madvise+0x24/0x38
[<90000000015b9e88>] do_syscall+0x78/0x98
[<9000000000221f18>] handle_syscall+0xb8/0x158
In some cases, pmd may be NULL and rely on NULL as the return value for
processing, so it is necessary to determine this situation here. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
The platform profile driver is loaded even on platforms that do not have
ACPI enabled. The initialization of the sysfs entries was recently moved
from platform_profile_register() to the module init call, and those
entries need acpi_kobj to be initialized which is not the case when ACPI
is disabled.
This results in the following warning:
WARNING: CPU: 5 PID: 1 at fs/sysfs/group.c:131 internal_create_group+0xa22/0xdd8
Modules linked in:
CPU: 5 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.15.0-rc7-dirty #6 PREEMPT
Tainted: [W]=WARN
Hardware name: riscv-virtio,qemu (DT)
epc : internal_create_group+0xa22/0xdd8
ra : internal_create_group+0xa22/0xdd8
Call Trace:
internal_create_group+0xa22/0xdd8
sysfs_create_group+0x22/0x2e
platform_profile_init+0x74/0xb2
do_one_initcall+0x198/0xa9e
kernel_init_freeable+0x6d8/0x780
kernel_init+0x28/0x24c
ret_from_fork+0xe/0x18
Fix this by checking if ACPI is enabled before trying to create sysfs
entries.
[ rjw: Subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
IB/cm: Drop lockdep assert and WARN when freeing old msg
The send completion handler can run after cm_id has advanced to another
message. The cm_id lock is not needed in this case, but a recent change
re-used cm_free_priv_msg(), which asserts that the lock is held and
WARNs if the cm_id's currently outstanding msg is different than the one
being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: convert control queue mutex to a spinlock
With VIRTCHNL2_CAP_MACFILTER enabled, the following warning is generated
on module load:
[ 324.701677] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
[ 324.701684] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1582, name: NetworkManager
[ 324.701689] preempt_count: 201, expected: 0
[ 324.701693] RCU nest depth: 0, expected: 0
[ 324.701697] 2 locks held by NetworkManager/1582:
[ 324.701702] #0: ffffffff9f7be770 (rtnl_mutex){....}-{3:3}, at: rtnl_newlink+0x791/0x21e0
[ 324.701730] #1: ff1100216c380368 (_xmit_ETHER){....}-{2:2}, at: __dev_open+0x3f0/0x870
[ 324.701749] Preemption disabled at:
[ 324.701752] [<ffffffff9cd23b9d>] __dev_open+0x3dd/0x870
[ 324.701765] CPU: 30 UID: 0 PID: 1582 Comm: NetworkManager Not tainted 6.15.0-rc5+ #2 PREEMPT(voluntary)
[ 324.701771] Hardware name: Intel Corporation M50FCP2SBSTD/M50FCP2SBSTD, BIOS SE5C741.86B.01.01.0001.2211140926 11/14/2022
[ 324.701774] Call Trace:
[ 324.701777] <TASK>
[ 324.701779] dump_stack_lvl+0x5d/0x80
[ 324.701788] ? __dev_open+0x3dd/0x870
[ 324.701793] __might_resched.cold+0x1ef/0x23d
<..>
[ 324.701818] __mutex_lock+0x113/0x1b80
<..>
[ 324.701917] idpf_ctlq_clean_sq+0xad/0x4b0 [idpf]
[ 324.701935] ? kasan_save_track+0x14/0x30
[ 324.701941] idpf_mb_clean+0x143/0x380 [idpf]
<..>
[ 324.701991] idpf_send_mb_msg+0x111/0x720 [idpf]
[ 324.702009] idpf_vc_xn_exec+0x4cc/0x990 [idpf]
[ 324.702021] ? rcu_is_watching+0x12/0xc0
[ 324.702035] idpf_add_del_mac_filters+0x3ed/0xb50 [idpf]
<..>
[ 324.702122] __hw_addr_sync_dev+0x1cf/0x300
[ 324.702126] ? find_held_lock+0x32/0x90
[ 324.702134] idpf_set_rx_mode+0x317/0x390 [idpf]
[ 324.702152] __dev_open+0x3f8/0x870
[ 324.702159] ? __pfx___dev_open+0x10/0x10
[ 324.702174] __dev_change_flags+0x443/0x650
<..>
[ 324.702208] netif_change_flags+0x80/0x160
[ 324.702218] do_setlink.isra.0+0x16a0/0x3960
<..>
[ 324.702349] rtnl_newlink+0x12fd/0x21e0
The sequence is as follows:
rtnl_newlink()->
__dev_change_flags()->
__dev_open()->
dev_set_rx_mode() - > # disables BH and grabs "dev->addr_list_lock"
idpf_set_rx_mode() -> # proceed only if VIRTCHNL2_CAP_MACFILTER is ON
__dev_uc_sync() ->
idpf_add_mac_filter ->
idpf_add_del_mac_filters ->
idpf_send_mb_msg() ->
idpf_mb_clean() ->
idpf_ctlq_clean_sq() # mutex_lock(cq_lock)
Fix by converting cq_lock to a spinlock. All operations under the new
lock are safe except freeing the DMA memory, which may use vunmap(). Fix
by requesting a contiguous physical memory for the DMA mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix warning when reconnecting channel
When reconnecting a channel in smb2_reconnect_server(), a dummy tcon
is passed down to smb2_reconnect() with ->query_interface
uninitialized, so we can't call queue_delayed_work() on it.
Fix the following warning by ensuring that we're queueing the delayed
worker from correct tcon.
WARNING: CPU: 4 PID: 1126 at kernel/workqueue.c:2498 __queue_delayed_work+0x1d2/0x200
Modules linked in: cifs cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 4 UID: 0 PID: 1126 Comm: kworker/4:0 Not tainted 6.16.0-rc3 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-4.fc42 04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__queue_delayed_work+0x1d2/0x200
Code: 41 5e 41 5f e9 7f ee ff ff 90 0f 0b 90 e9 5d ff ff ff bf 02 00
00 00 e8 6c f3 07 00 89 c3 eb bd 90 0f 0b 90 e9 57 f> 0b 90 e9 65 fe
ff ff 90 0f 0b 90 e9 72 fe ff ff 90 0f 0b 90 e9
RSP: 0018:ffffc900014afad8 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff888124d99988 RCX: ffffffff81399cc1
RDX: dffffc0000000000 RSI: ffff888114326e00 RDI: ffff888124d999f0
RBP: 000000000000ea60 R08: 0000000000000001 R09: ffffed10249b3331
R10: ffff888124d9998f R11: 0000000000000004 R12: 0000000000000040
R13: ffff888114326e00 R14: ffff888124d999d8 R15: ffff888114939020
FS: 0000000000000000(0000) GS:ffff88829f7fe000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe7a2b4038 CR3: 0000000120a6f000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
queue_delayed_work_on+0xb4/0xc0
smb2_reconnect+0xb22/0xf50 [cifs]
smb2_reconnect_server+0x413/0xd40 [cifs]
? __pfx_smb2_reconnect_server+0x10/0x10 [cifs]
? local_clock_noinstr+0xd/0xd0
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
process_one_work+0x4c5/0xa10
? __pfx_process_one_work+0x10/0x10
? __list_add_valid_or_report+0x37/0x120
worker_thread+0x2f1/0x5a0
? __kthread_parkme+0xde/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1fe/0x380
? kthread+0x10f/0x380
? __pfx_kthread+0x10/0x10
? local_clock_noinstr+0xd/0xd0
? ret_from_fork+0x1b/0x1f0
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
? rcu_is_watching+0x20/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork+0x15b/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 1116206
hardirqs last enabled at (1116205): [<ffffffff8143af42>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1116206): [<ffffffff81399f0e>] queue_delayed_work_on+0x6e/0xc0
softirqs last enabled at (1116138): [<ffffffffc04562fd>] __smb_send_rqst+0x42d/0x950 [cifs]
softirqs last disabled at (1116136): [<ffffffff823d35e1>] release_sock+0x21/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
Shawn and John reported a hang issue during system suspend as below:
- USB gadget is enabled as Ethernet
- There is data transfer over USB Ethernet (scp a big file between host
and device)
- Device is going in/out suspend (echo mem > /sys/power/state)
The root cause is the USB device controller is suspended but the USB bus
is still active which caused the USB host continues to transfer data with
device and the device continues to queue USB requests (in this case, a
delayed TCP ACK packet trigger the issue) after controller is suspended,
however the USB controller clock is already gated off. Then if udc driver
access registers after that point, the system will hang.
The correct way to avoid such issue is to disconnect device from host when
the USB bus is not at suspend state. Then the host will receive disconnect
event and stop data transfer in time. To continue make USB gadget device
work after system resume, this will reconnect device automatically.
To make usb wakeup work if USB bus is already at suspend state, this will
keep connection for it only when USB device controller has enabled wakeup
capability. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: ffa: fix sleep in atomic context
The OP-TEE driver registers the function notif_callback() for FF-A
notifications. However, this function is called in an atomic context
leading to errors like this when processing asynchronous notifications:
| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0-00019-g657536ebe0aa #13
| Hardware name: linux,dummy-virt (DT)
| Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x78/0x90
| dump_stack+0x18/0x24
| __might_resched+0x114/0x170
| __might_sleep+0x48/0x98
| mutex_lock+0x24/0x80
| optee_get_msg_arg+0x7c/0x21c
| simple_call_with_arg+0x50/0xc0
| optee_do_bottom_half+0x14/0x20
| notif_callback+0x3c/0x48
| handle_notif_callbacks+0x9c/0xe0
| notif_get_and_handle+0x40/0x88
| generic_exec_single+0x80/0xc0
| smp_call_function_single+0xfc/0x1a0
| notif_pcpu_irq_work_fn+0x2c/0x38
| process_one_work+0x14c/0x2b4
| worker_thread+0x2e4/0x3e0
| kthread+0x13c/0x210
| ret_from_fork+0x10/0x20
Fix this by adding work queue to process the notification in a
non-atomic context. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix suspicious RCU usage warning
When I run the NVME over TCP test in virtme-ng, I get the following
"suspicious RCU usage" warning in nvme_mpath_add_sysfs_link():
'''
[ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77.
[ 5.027401][ T183] nvme nvme0: creating 2 I/O queues.
[ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues.
[ 5.032587][ T183] nvme nvme0: new ctrl: NQN "nqn.2025-06.org.nvmexpress.mptcp", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77
[ 5.042214][ T25]
[ 5.042440][ T25] =============================
[ 5.042579][ T25] WARNING: suspicious RCU usage
[ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted
[ 5.042812][ T25] -----------------------------
[ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!!
[ 5.043111][ T25]
[ 5.043111][ T25] other info that might help us debug this:
[ 5.043111][ T25]
[ 5.043341][ T25]
[ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1
[ 5.043502][ T25] 3 locks held by kworker/u9:0/25:
[ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350
[ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350
[ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0
[ 5.044300][ T25]
[ 5.044300][ T25] stack backtrace:
[ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full)
[ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 5.044442][ T25] Workqueue: async async_run_entry_fn
[ 5.044445][ T25] Call Trace:
[ 5.044446][ T25] <TASK>
[ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0
[ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1
[ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0
[ 5.044459][ T25] ? queue_work_on+0x90/0xf0
[ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110
[ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0
[ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0
[ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10
[ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580
[ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0
[ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240
[ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10
[ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10
[ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0
[ 5.044498][ T25] ? validate_chain+0x232/0x4f0
[ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810
[ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10
[ 5.044508][ T25] ? find_held_lock+0x2b/0x80
[ 5.044512][ T25] ? ktime_get+0x16d/0x220
[ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30
[ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10
[ 5.044522][ T25] async_run_entry_fn+0x97/0x560
[ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0
[ 5.044526][ T25] process_one_work+0xd3c/0x1350
[ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10
[ 5.044536][ T25] ? assign_work+0x16c/0x240
[ 5.044539][ T25] worker_thread+0x4da/0xd50
[ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10
[ 5.044546][ T25] kthread+0x356/0x5c0
[ 5.044548][ T25] ? __pfx_kthread+0x10/0x10
[ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0
[ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180
[ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0
[ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0
[ 5.044557][ T25] ? __pfx_kthread+0x10/0x10
[ 5.04
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix regression with native SMB symlinks
Some users and customers reported that their backup/copy tools started
to fail when the directory being copied contained symlink targets that
the client couldn't parse - even when those symlinks weren't followed.
Fix this by allowing lstat(2) and readlink(2) to succeed even when the
client can't resolve the symlink target, restoring old behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add basic validation for RAS header
If RAS header read from EEPROM is corrupted, it could result in trying
to allocate huge memory for reading the records. Add some validation to
header fields. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850
GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash
on some specific platforms.
Since this register is divergent for WCN7850 and QCN9274, move it to
register table to allow different definitions. Then correct the register
address for WCN7850 to fix this issue.
Note IPQ5332 is not affected as it is not PCIe based device.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: xsk: rx: fix the frame's length check
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: cpu_ops_sbi: Use static array for boot_data
Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk
allocator"), if NUMA is enabled, the page percpu allocator may be used
on very sparse configurations, or when requested on boot with
percpu_alloc=page.
In that case, percpu data gets put in the vmalloc area. However,
sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data,
and simply assumes that __pa() would work. This causes the just started
hart to immediately access an invalid address and hang.
Fortunately, struct sbi_hart_boot_data is not too large, so we can
simply allocate an array for boot_data statically, putting it in the
kernel image.
This fixes NUMA=y SMP boot on Sophgo SG2042.
To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then
run with:
qemu-system-riscv64 -M virt -smp 2 -nographic \
-kernel arch/riscv/boot/Image \
-append "percpu_alloc=page"
Kernel output:
[ 0.000000] Booting Linux on hartid 0
[ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025
...
[ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712
...
[ 0.083192] smp: Bringing up secondary CPUs ...
[ 0.086722] ------------[ cut here ]------------
[ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080)
[ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8
[ 0.088376] Modules linked in:
[ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE
[ 0.088833] Hardware name: riscv-virtio,qemu (DT)
[ 0.088948] epc : __virt_to_phys+0xae/0xe8
[ 0.089001] ra : __virt_to_phys+0xae/0xe8
[ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0
[ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976
[ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0
[ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000
[ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001
[ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec
[ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000
[ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7
[ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8
[ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003
[ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8
[ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8
[ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c
[ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258
[ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c
[ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc
[ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244
[ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90
[ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118
[ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8
[ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4
[ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c
[ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0
[ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18
[ 0.090560] ---[ end trace 0000000000000000 ]---
[ 1.179875] CPU1: failed to come online
[ 1.190324] smp: Brought up 1 node, 1 CPU |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: Initialize UDP checksum field before checksumming
commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed
the initialization of the UDP checksum, which was wrong and broke
netpoll IPv6 transmission due to bad checksumming.
udph->check needs to be set before calling csum_ipv6_magic(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: vector: Fix context save/restore with xtheadvector
Previously only v0-v7 were correctly saved/restored,
and the context of v8-v31 are damanged.
Correctly save/restore v8-v31 to avoid breaking userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "riscv: Define TASK_SIZE_MAX for __access_ok()"
This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
[Adjusted commit message. - Paolo] |
