| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In kbase_jd_user_buf_pin_pages of mali_kbase_mem.c, there is a possible out of bounds write due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-210470189References: N/A |
| In the ioctl handlers of the Mediatek Command Queue driver, there is a possible out of bounds write due to insufficient input sanitization and missing SELinux restrictions. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-147882143References: M-ALPS04356754 |
| Acrobat Reader versions 23.003.20284 (and earlier), 20.005.30516 (and earlier) and 20.005.30514 (and earlier) are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Acrobat Reader DC versions versions 2020.013.20074 (and earlier), 2020.001.30018 (and earlier) and 2017.011.30188 (and earlier) are affected by a heap-based buffer overflow vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix potential buffer overflowin nfs_sysfs_link_rpc_client()
name is char[64] where the size of clnt->cl_program->name remains
unknown. Invoking strcat() directly will also lead to potential buffer
overflow. Change them to strscpy() and strncat() to fix potential
issues. |
| In the Linux kernel, the following vulnerability has been resolved:
media: intel/ipu6: remove cpu latency qos request on error
Fix cpu latency qos list corruption like below. It happens when
we do not remove cpu latency request on error path and free
corresponding memory.
[ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8).
[ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0
<snip>
[ 30.634640] l7 kernel: Call Trace:
[ 30.634650] l7 kernel: <TASK>
[ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6
[ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634690] l7 kernel: ? report_bug+0xff/0x140
[ 30.634702] l7 kernel: ? handle_bug+0x58/0x90
[ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70
[ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20
[ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634742] l7 kernel: plist_add+0xdd/0x140
[ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0
[ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0
[ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033] |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ds90ub9x3: Fix extra fwnode_handle_put()
The ub913 and ub953 drivers call fwnode_handle_put(priv->sd.fwnode) as
part of their remove process, and if the driver is removed multiple
times, eventually leads to put "overflow", possibly causing memory
corruption or crash.
The fwnode_handle_put() is a leftover from commit 905f88ccebb1 ("media:
i2c: ds90ub9x3: Fix sub-device matching"), which changed the code
related to the sd.fwnode, but missed removing these fwnode_handle_put()
calls. |
| Out-of-bounds write in fingerprint trustlet prior to SMR Oct-2025 Release 1 allows local privileged attackers to write out-of-bounds memory. |
| Out-of-bounds write in the pre-processing of JPEG decoding in libpadm.so prior to SMR Oct-2025 Release 1 allows local attackers to write out-of-bounds memory. |
| Out-of-bounds write under specific condition in the pre-processing of JPEG decoding in libpadm.so prior to SMR Oct-2025 Release 1 allows local attackers to cause memory corruption. |
| Out-of-bounds write in the parsing header for JPEG decoding in libpadm.so prior to SMR Oct-2025 Release 1 allows local attackers to cause memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panfrost: Fix shrinker list corruption by madvise IOCTL
Calling madvise IOCTL twice on BO causes memory shrinker list corruption
and crashes kernel because BO is already on the list and it's added to
the list again, while BO should be removed from the list before it's
re-added. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/selftests: fix subtraction overflow bug
On some machines hole_end can be small enough to cause subtraction
overflow. On the other side (addr + 2 * min_alignment) can overflow
in case of mock tests. This patch should handle both cases.
(cherry picked from commit ab3edc679c552a466e4bf0b11af3666008bd65a2) |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: Fix boundary conditions in interpolation
The functions power_supply_temp2resist_simple and power_supply_ocv2cap_simple
handle boundary conditions incorrectly.
The change was introduced in a4585ba2050f460f749bbaf2b67bd56c41e30283
("power: supply: core: Use library interpolation").
There are two issues: First, the lines "high = i - 1" and "high = i" in ocv2cap
have the wrong order compared to temp2resist. As a consequence, ocv2cap
sets high=-1 if ocv>table[0].ocv, which causes an out-of-bounds read.
Second, the logic of temp2resist is also not correct.
Consider the case table[] = {{20, 100}, {10, 80}, {0, 60}}.
For temp=5, we expect a resistance of 70% by interpolation.
However, temp2resist sets high=low=2 and returns 60. |
| NVIDIA Bluefield and ConnectX contain a vulnerability in the management interface that could allow a malicious actor with high privilege access to execute arbitrary code. |
| An out-of-bounds write vulnerability exists in F5OS-A and F5OS-C that could lead to memory corruption.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma queue left shift overflow issue
When queue number is > 4, left shift overflows due to 32 bits
integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1.
If CONFIG_UBSAN is enabled, kernel dumps below warning:
[ 10.363842] ==================================================================
[ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/
linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12
[ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int'
[ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg
[ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021
[ 10.363958] Call Trace:
[ 10.363960] <TASK>
[ 10.363963] dump_stack_lvl+0x4a/0x5f
[ 10.363971] dump_stack+0x10/0x12
[ 10.363974] ubsan_epilogue+0x9/0x45
[ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
[ 10.363979] ? wake_up_klogd+0x4a/0x50
[ 10.363983] ? vprintk_emit+0x8f/0x240
[ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac]
[ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac]
[ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac]
[ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac]
[ 10.364030] ? page_pool_alloc_pages+0x4d/0x70
[ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac]
[ 10.364042] stmmac_open+0x39e/0x920 [stmmac]
[ 10.364050] __dev_open+0xf0/0x1a0
[ 10.364054] __dev_change_flags+0x188/0x1f0
[ 10.364057] dev_change_flags+0x26/0x60
[ 10.364059] do_setlink+0x908/0xc40
[ 10.364062] ? do_setlink+0xb10/0xc40
[ 10.364064] ? __nla_validate_parse+0x4c/0x1a0
[ 10.364068] __rtnl_newlink+0x597/0xa10
[ 10.364072] ? __nla_reserve+0x41/0x50
[ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0
[ 10.364079] ? pskb_expand_head+0x75/0x310
[ 10.364082] ? nla_reserve_64bit+0x21/0x40
[ 10.364086] ? skb_free_head+0x65/0x80
[ 10.364089] ? security_sock_rcv_skb+0x2c/0x50
[ 10.364094] ? __cond_resched+0x19/0x30
[ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420
[ 10.364100] rtnl_newlink+0x49/0x70
This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue
mapping warning.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195 |
| In the Linux kernel, the following vulnerability has been resolved:
be2net: Fix buffer overflow in be_get_module_eeprom
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.
Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave',
i.e. to KVM's historical uABI size. When saving FPU state for usersapce,
KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if
the host doesn't support XSAVE. Setting the XSAVE header allows the VM
to be migrated to a host that does support XSAVE without the new host
having to handle FPU state that may or may not be compatible with XSAVE.
Setting the uABI size to the host's default size results in out-of-bounds
writes (setting the FP+SSE bits) and data corruption (that is thankfully
caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs.
WARN if the default size is larger than KVM's historical uABI size; all
features that can push the FPU size beyond the historical size must be
opt-in.
==================================================================
BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130
Read of size 8 at addr ffff888011e33a00 by task qemu-build/681
CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1
Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x45
print_report.cold+0x45/0x575
kasan_report+0x9b/0xd0
fpu_copy_uabi_to_guest_fpstate+0x86/0x130
kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm]
kvm_vcpu_ioctl+0x47f/0x7b0 [kvm]
__x64_sys_ioctl+0x5de/0xc90
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Allocated by task 0:
(stack is not available)
The buggy address belongs to the object at ffff888011e33800
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes to the right of
512-byte region [ffff888011e33800, ffff888011e33a00)
The buggy address belongs to the physical page:
page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30
head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=1)
raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint |
| APTIOV contains a vulnerability in BIOS where an attacker may cause a Buffer Copy without Checking Size of Input by local accessing. Successful exploitation of this vulnerability may lead to arbitrary code execution. |
