| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in UTT 1200GW up to 3.0.0-170831. The affected element is an unknown function of the file /goform/formConfigDnsFilterGlobal. This manipulation of the argument GroupName causes buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/buffer: fix use-after-free when call bh_read() helper
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch(). |
| A vulnerability was detected in UTT 1250GW up to 3.2.2-200710. This vulnerability affects the function sub_453DC of the file /goform/formConfigApConfTemp. Performing manipulation results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: Fix the driver update version check
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
[ rjw: Changelog edits ] |
| A vulnerability was determined in UTT 1250GW up to v2v3.2.2-200710. Affected is the function strcpy of the file /goform/formUserStatusRemark. This manipulation of the argument Username causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in UTT 1250GW up to v2v3.2.2-200710. Affected by this vulnerability is the function strcpy of the file /goform/aspChangeChannel. The manipulation of the argument pvid leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization.
The PHY address should be masked to 5 bits (0-31). Without this
mask, invalid PHY addresses could be used, potentially causing issues
with MDIO bus operations.
Fix this by masking the PHY address with 0x1f (31 decimal) to ensure
it stays within the valid range. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Limit access to parser->buffer when trace_get_user failed
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl726: Prevent invalid irq number
The reproducer passed in an irq number(0x80008000) that was too large,
which triggered the oob.
Added an interrupt number check to prevent users from passing in an irq
number that was too large.
If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid
because it shifts a 1-bit into the sign bit (which is UB in C).
Possible solutions include reducing the upper bound on the
`it->options[1]` value to 30 or lower, or using `1U << it->options[1]`.
The old code would just not attempt to request the IRQ if the
`options[1]` value were invalid. And it would still configure the
device without interrupts even if the call to `request_irq` returned an
error. So it would be better to combine this test with the test below. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Make insn_rw_emulate_bits() do insn->n samples
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers. |
| Apache NiFi 1.20.0 through 2.6.0 include the GetAsanaObject Processor, which requires integration with a configurable Distribute Map Cache Client Service for storing and retrieving state information. The GetAsanaObject Processor used generic Java Object serialization and deserialization without filtering. Unfiltered Java object deserialization does not provide protection against crafted state information stored in the cache server configured for GetAsanaObject. Exploitation requires an Apache NiFi system running with the GetAsanaObject Processor, and direct access to the configured cache server. Upgrading to Apache NiFi 2.7.0 is the recommended mitigation, which replaces Java Object serialization with JSON serialization. Removing the GetAsanaObject Processor located in the nifi-asana-processors-nar bundle also prevents exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Also allocate and copy hash for reading of filter files
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Xylus Themes WP Event Aggregator allows Reflected XSS. This issue affects WP Event Aggregator: from n/a through 1.8.2. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Rara Theme UltraLight allows Reflected XSS. This issue affects UltraLight: from n/a through 1.2. |
| Insecure permissions in Agent-Zero v0.8.* allow attackers to arbitrarily reset the system via unspecified vectors. |
| Uncontrolled Search Path Element vulnerability in Mitsubishi Electric Iconics Digital Solutions GENESIS64 all versions, Mitsubishi Electric GENESIS64 all versions, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite all versions, Mitsubishi Electric ICONICS Suite all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS32 all versions, Mitsubishi Electric GENESIS32 all versions, and Mitsubishi Electric MC Works64 all versions allows a local attacker to execute a malicious code by storing a specially crafted DLL in a specific folder when GENESIS64, ICONICS Suite, GENESIS32, and MC Works64 are installed with the Pager agent in the alarm multi-agent notification feature. |
| The /charms endpoint on a Juju controller lacked sufficient authorization checks, allowing any user with an account on the controller to upload a charm. Uploading a malicious charm that exploits a Zip Slip vulnerability could allow an attacker to gain access to a machine running a unit through the affected charm. |
| In Juju versions prior to 3.6.8 and 2.9.52, any authenticated controller user was allowed to upload arbitrary agent binaries to any model or to the controller itself, without verifying model membership or requiring explicit permissions. This enabled the distribution of poisoned binaries to new or upgraded machines, potentially resulting in remote code execution. |
| 1. A cookie is set using the `secure` keyword for `https://target`
2. curl is redirected to or otherwise made to speak with `http://target` (same
hostname, but using clear text HTTP) using the same cookie set
3. The same cookie name is set - but with just a slash as path (`path=\"/\",`).
Since this site is not secure, the cookie *should* just be ignored.
4. A bug in the path comparison logic makes curl read outside a heap buffer
boundary
The bug either causes a crash or it potentially makes the comparison come to
the wrong conclusion and lets the clear-text site override the contents of the
secure cookie, contrary to expectations and depending on the memory contents
immediately following the single-byte allocation that holds the path.
The presumed and correct behavior would be to plainly ignore the second set of
the cookie since it was already set as secure on a secure host so overriding
it on an insecure host should not be okay. |
