| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPDeveloper Essential Addons for Elementor essential-addons-for-elementor-lite allows DOM-Based XSS.This issue affects Essential Addons for Elementor: from n/a through <= 6.5.3. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Mikado-Themes Lekker lekker allows PHP Local File Inclusion.This issue affects Lekker: from n/a through <= 1.8. |
| Issue summary: Parsing CMS AuthEnvelopedData message with maliciously
crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| soroban-fixed-point-math is a fixed-point math library for Soroban smart contacts. In versions 1.3.0 and 1.4.0, the `mulDiv(x, y, z)` function incorrectly handled cases where both the intermediate product $x * y$ and the divisor $z$ were negative. The logic assumed that if the intermediate product was negative, the final result must also be negative, neglecting the sign of $z$. This resulted in rounding being applied in the wrong direction for cases where both $x * y$ and $z$ were negative. The functions most at risk are `fixed_div_floor` and `fixed_div_ceil`, as they often use non-constant numbers as the divisor $z$ in `mulDiv`. This error is present in all signed `FixedPoint` and `SorobanFixedPoint` implementations, including `i64`, `i128`, and `I256`. Versions 1.3.1 and 1.4.1 contain a patch. No known workarounds for this issue are available. |
| PHPUnit is a testing framework for PHP. A vulnerability has been discovered in versions prior to 12.5.8, 11.5.50, 10.5.62, 9.6.33, and 8.5.52 involving unsafe deserialization of code coverage data in PHPT test execution. The vulnerability exists in the `cleanupForCoverage()` method, which deserializes code coverage files without validation, potentially allowing remote code execution if malicious `.coverage` files are present prior to the execution of the PHPT test. The vulnerability occurs when a `.coverage` file, which should not exist before test execution, is deserialized without the `allowed_classes` parameter restriction. An attacker with local file write access can place a malicious serialized object with a `__wakeup()` method into the file system, leading to arbitrary code execution during test runs with code coverage instrumentation enabled. This vulnerability requires local file write access to the location where PHPUnit stores or expects code coverage files for PHPT tests. This can occur through CI/CD pipeline attacks, the local development environment, and/or compromised dependencies. Rather than just silently sanitizing the input via `['allowed_classes' => false]`, the maintainer has chosen to make the anomalous state explicit by treating pre-existing `.coverage` files for PHPT tests as an error condition. Starting in versions in versions 12.5.8, 11.5.50, 10.5.62, 9.6.33, when a `.coverage` file is detected for a PHPT test prior to execution, PHPUnit will emit a clear error message identifying the anomalous state. Organizations can reduce the effective risk of this vulnerability through proper CI/CD configuration, including ephemeral runners, code review enforcement, branch protection, artifact isolation, and access control. |
| SandboxJS is a JavaScript sandboxing library. Versions prior to 0.8.26 have a sandbox escape vulnerability due to `AsyncFunction` not being isolated in `SandboxFunction`. The library attempts to sandbox code execution by replacing the global `Function` constructor with a safe, sandboxed version (`SandboxFunction`). This is handled in `utils.ts` by mapping `Function` to `sandboxFunction` within a map used for lookups. However, before version 0.8.26, the library did not include mappings for `AsyncFunction`, `GeneratorFunction`, and `AsyncGeneratorFunction`. These constructors are not global properties but can be accessed via the `.constructor` property of an instance (e.g., `(async () => {}).constructor`). In `executor.ts`, property access is handled. When code running inside the sandbox accesses `.constructor` on an async function (which the sandbox allows creating), the `executor` retrieves the property value. Since `AsyncFunction` was not in the safe-replacement map, the `executor` returns the actual native host `AsyncFunction` constructor. Constructors for functions in JavaScript (like `Function`, `AsyncFunction`) create functions that execute in the global scope. By obtaining the host `AsyncFunction` constructor, an attacker can create a new async function that executes entirely outside the sandbox context, bypassing all restrictions and gaining full access to the host environment (Remote Code Execution). Version 0.8.26 patches this vulnerability. |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously
crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing
non-ASCII BMP code point can trigger a one byte write before the allocated
buffer.
Impact summary: The out-of-bounds write can cause a memory corruption
which can have various consequences including a Denial of Service.
The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12
BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes,
the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16
source byte count as the destination buffer capacity to UTF8_putc(). For BMP
code points above U+07FF, UTF-8 requires three bytes, but the forwarded
capacity can be just two bytes. UTF8_putc() then returns -1, and this negative
value is added to the output length without validation, causing the
length to become negative. The subsequent trailing NUL byte is then written
at a negative offset, causing write outside of heap allocated buffer.
The vulnerability is reachable via the public PKCS12_get_friendlyname() API
when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a
different code path that avoids this issue, PKCS12_get_friendlyname() directly
invokes the vulnerable function. Exploitation requires an attacker to provide
a malicious PKCS#12 file to be parsed by the application and the attacker
can just trigger a one zero byte write before the allocated buffer.
For that reason the issue was assessed as Low severity according to our
Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.
OpenSSL 1.0.2 is not affected by this issue. |
| Buffer Overflow vulnerability in libpng 1.6.43-1.6.46 allows a local attacker to cause a denial of service via the pngimage with AddressSanitizer (ASan), the program leaks memory in various locations, eventually leading to high memory usage and causing the program to become unresponsive |
| An Authentication Bypass Using an
Alternate Path or Channel vulnerability in Juniper Networks Session Smart
Router may allows a network-based attacker to bypass authentication
and take administrative control of the device.
This issue affects Session Smart Router:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects Session Smart Conductor:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2;
This issue affects WAN Assurance Managed Routers:
* from 5.6.7 before 5.6.17,
* from 6.0 before 6.0.8 (affected from 6.0.8),
* from 6.1 before 6.1.12-lts,
* from 6.2 before 6.2.8-lts,
* from 6.3 before 6.3.3-r2. |
| Issue summary: Writing large, newline-free data into a BIO chain using the
line-buffering filter where the next BIO performs short writes can trigger
a heap-based out-of-bounds write.
Impact summary: This out-of-bounds write can cause memory corruption which
typically results in a crash, leading to Denial of Service for an application.
The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in
TLS/SSL data paths. In OpenSSL command-line applications, it is typically
only pushed onto stdout/stderr on VMS systems. Third-party applications that
explicitly use this filter with a BIO chain that can short-write and that
write large, newline-free data influenced by an attacker would be affected.
However, the circumstances where this could happen are unlikely to be under
attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated
data controlled by an attacker. For that reason the issue was assessed as
Low severity.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the BIO implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses an infinite loop vulnerability that is present in versions prior to 6.6.2 can craft a PDF which leads to an infinite loop. This requires accessing the outlines/bookmarks. This has been fixed in pypdf 6.6.2. If projects cannot upgrade yet, consider applying the changes from PR #3610 manually. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameter 'Id_usuario' in ‘/evaluacion_acciones_ver_auto.aspx’, could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameter 'Id_usuario' and 'Id_evaluacion’ in ‘/evaluacion_competencias_evalua_old.aspx’, could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameter 'Id_usuario' and 'Id_evaluacion’ in ‘/evaluacion_hca_evalua.aspx’, could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameter 'Id_evaluacion' in '/evaluacion_objetivos_evalua_definido.aspx', could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
| Insecure file operations in HPE Aruba Networking Fabric Composer’s backup functionality could allow authenticated attackers to achieve remote code execution. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameters 'Id_usuario' and 'Id_evaluacion’ in ‘/evaluacion_hca_ver_auto.asp', could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameter 'Id_usuario' in '/evaluacion_objetivos_anyo_sig_evalua.aspx', could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to version 4.11.7, IP Restriction Middleware in Hono is vulnerable to an IP address validation bypass. The `IPV4_REGEX` pattern and `convertIPv4ToBinary` function in `src/utils/ipaddr.ts` do not properly validate that IPv4 octet values are within the valid range of 0-255, allowing attackers to craft malformed IP addresses that bypass IP-based access controls. Version 4.11.7 contains a patch for the issue. |
| Issue summary: A type confusion vulnerability exists in the signature
verification of signed PKCS#7 data where an ASN1_TYPE union member is
accessed without first validating the type, causing an invalid or NULL
pointer dereference when processing malformed PKCS#7 data.
Impact summary: An application performing signature verification of PKCS#7
data or calling directly the PKCS7_digest_from_attributes() function can be
caused to dereference an invalid or NULL pointer when reading, resulting in
a Denial of Service.
The function PKCS7_digest_from_attributes() accesses the message digest attribute
value without validating its type. When the type is not V_ASN1_OCTET_STRING,
this results in accessing invalid memory through the ASN1_TYPE union, causing
a crash.
Exploiting this vulnerability requires an attacker to provide a malformed
signed PKCS#7 to an application that verifies it. The impact of the
exploit is just a Denial of Service, the PKCS7 API is legacy and applications
should be using the CMS API instead. For these reasons the issue was
assessed as Low severity.
The FIPS modules in 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the PKCS#7 parsing implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. |
