Search Results (16828 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2022-48835 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Page fault in reply q processing A page fault was encountered in mpt3sas on a LUN reset error path: [ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0) [ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2) [ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2) [ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00 [ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0) [ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0) [ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002) [ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d [ 149.885617] #PF: supervisor read access in kernel mode [ 149.894346] #PF: error_code(0x0000) - not-present page [ 149.903123] PGD 0 P4D 0 [ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1 [ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021 [ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas] [ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee [ 149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246 [ 150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071 [ 150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8 [ 150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff [ 150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000 [ 150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80 [ 150.054963] FS: 0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000 [ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0 [ 150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 150.108323] PKRU: 55555554 [ 150.114690] Call Trace: [ 150.120497] ? printk+0x48/0x4a [ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas] [ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas] [ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas] [ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod] [ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod] [ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60 [ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod] [ 150.203206] ? __schedule+0x1e9/0x610 [ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod] [ 150.217924] kthread+0x12e/0x150 [ 150.224041] ? kthread_worker_fn+0x130/0x130 [ 150.231206] ret_from_fork+0x1f/0x30 This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q pointer outside of the list_for_each_entry() loop. At the end of the full list traversal the pointer is invalid. Move the _base_process_reply_queue() call inside of the loop.
CVE-2022-48820 1 Linux 1 Linux Kernel 2025-05-04 7.1 High
In the Linux kernel, the following vulnerability has been resolved: phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning.
CVE-2022-48809 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: fix a memleak when uncloning an skb dst and its metadata When uncloning an skb dst and its associated metadata, a new dst+metadata is allocated and later replaces the old one in the skb. This is helpful to have a non-shared dst+metadata attached to a specific skb. The issue is the uncloned dst+metadata is initialized with a refcount of 1, which is increased to 2 before attaching it to the skb. When tun_dst_unclone returns, the dst+metadata is only referenced from a single place (the skb) while its refcount is 2. Its refcount will never drop to 0 (when the skb is consumed), leading to a memory leak. Fix this by removing the call to dst_hold in tun_dst_unclone, as the dst+metadata refcount is already 1.
CVE-2022-48808 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic when DSA master device unbinds on shutdown Rafael reports that on a system with LX2160A and Marvell DSA switches, if a reboot occurs while the DSA master (dpaa2-eth) is up, the following panic can be seen: systemd-shutdown[1]: Rebooting. Unable to handle kernel paging request at virtual address 00a0000800000041 [00a0000800000041] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32 pc : dsa_slave_netdevice_event+0x130/0x3e4 lr : raw_notifier_call_chain+0x50/0x6c Call trace: dsa_slave_netdevice_event+0x130/0x3e4 raw_notifier_call_chain+0x50/0x6c call_netdevice_notifiers_info+0x54/0xa0 __dev_close_many+0x50/0x130 dev_close_many+0x84/0x120 unregister_netdevice_many+0x130/0x710 unregister_netdevice_queue+0x8c/0xd0 unregister_netdev+0x20/0x30 dpaa2_eth_remove+0x68/0x190 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 __do_sys_reboot+0x1cc/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c It can be seen from the stack trace that the problem is that the deregistration of the master causes a dev_close(), which gets notified as NETDEV_GOING_DOWN to dsa_slave_netdevice_event(). But dsa_switch_shutdown() has already run, and this has unregistered the DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to call dev_close_many() on those slave interfaces, leading to the problem. The previous attempt to avoid the NETDEV_GOING_DOWN on the master after dsa_switch_shutdown() was called seems improper. Unregistering the slave interfaces is unnecessary and unhelpful. Instead, after the slaves have stopped being uppers of the DSA master, we can now reset to NULL the master->dsa_ptr pointer, which will make DSA start ignoring all future notifier events on the master.
CVE-2022-48805 1 Linux 1 Linux Kernel 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that.
CVE-2022-48800 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm: vmscan: remove deadlock due to throttling failing to make progress A soft lockup bug in kcompactd was reported in a private bugzilla with the following visible in dmesg; watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479] The machine had 256G of RAM with no swap and an earlier failed allocation indicated that node 0 where kcompactd was run was potentially unreclaimable; Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes Vlastimil Babka investigated a crash dump and found that a task migrating pages was trying to drain PCP lists; PID: 52922 TASK: ffff969f820e5000 CPU: 19 COMMAND: "kworker/u128:3" Call Trace: __schedule schedule schedule_timeout wait_for_completion __flush_work __drain_all_pages __alloc_pages_slowpath.constprop.114 __alloc_pages alloc_migration_target migrate_pages migrate_to_node do_migrate_pages cpuset_migrate_mm_workfn process_one_work worker_thread kthread ret_from_fork This failure is specific to CONFIG_PREEMPT=n builds. The root of the problem is that kcompact0 is not rescheduling on a CPU while a task that has isolated a large number of the pages from the LRU is waiting on kcompact0 to reschedule so the pages can be released. While shrink_inactive_list() only loops once around too_many_isolated, reclaim can continue without rescheduling if sc->skipped_deactivate == 1 which could happen if there was no file LRU and the inactive anon list was not low.
CVE-2022-48793 2 Linux, Redhat 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: nSVM: fix potential NULL derefernce on nested migration Turns out that due to review feedback and/or rebases I accidentally moved the call to nested_svm_load_cr3 to be too early, before the NPT is enabled, which is very wrong to do. KVM can't even access guest memory at that point as nested NPT is needed for that, and of course it won't initialize the walk_mmu, which is main issue the patch was addressing. Fix this for real.
CVE-2022-48787 1 Linux 1 Linux Kernel 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: iwlwifi: fix use-after-free If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway.
CVE-2022-48783 1 Linux 1 Linux Kernel 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus).
CVE-2022-48782 1 Linux 1 Linux Kernel 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful.
CVE-2022-48781 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - get rid of alg_memory_allocated alg_memory_allocated does not seem to be really used. alg_proto does have a .memory_allocated field, but no corresponding .sysctl_mem. This means sk_has_account() returns true, but all sk_prot_mem_limits() users will trigger a NULL dereference [1]. THis was not a problem until SO_RESERVE_MEM addition. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3591 Comm: syz-executor153 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_setsockopt+0x14a9/0x3a30 net/core/sock.c:1446 __sys_setsockopt+0x5af/0x980 net/socket.c:2176 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xb1/0xc0 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc7440fddc9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe98f07968 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc7440fddc9 RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000004 R09: 00007ffe98f07990 R10: 0000000020000000 R11: 0000000000000246 R12: 00007ffe98f0798c R13: 00007ffe98f079a0 R14: 00007ffe98f079e0 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
CVE-2022-48779 1 Linux 1 Linux Kernel 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del().
CVE-2022-48778 1 Linux 1 Linux Kernel 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: gpmi: don't leak PM reference in error path If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped.
CVE-2022-48777 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: qcom: Fix kernel panic on skipped partition In the event of a skipped partition (case when the entry name is empty) the kernel panics in the cleanup function as the name entry is NULL. Rework the parser logic by first checking the real partition number and then allocate the space and set the data for the valid partitions. The logic was also fundamentally wrong as with a skipped partition, the parts number returned was incorrect by not decreasing it for the skipped partitions.
CVE-2022-48775 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add(): If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put().
CVE-2022-48771 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix stale file descriptors on failed usercopy A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded.
CVE-2022-48770 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack() task_pt_regs() can return NULL on powerpc for kernel threads. This is then used in __bpf_get_stack() to check for user mode, resulting in a kernel oops. Guard against this by checking return value of task_pt_regs() before trying to obtain the call chain.
CVE-2022-48764 1 Linux 1 Linux Kernel 2025-05-04 5.3 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2} Free the "struct kvm_cpuid_entry2" array on successful post-KVM_RUN KVM_SET_CPUID{,2} to fix a memory leak, the callers of kvm_set_cpuid() free the array only on failure. BUG: memory leak unreferenced object 0xffff88810963a800 (size 2048): comm "syz-executor025", pid 3610, jiffies 4294944928 (age 8.080s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 0d 00 00 00 ................ 47 65 6e 75 6e 74 65 6c 69 6e 65 49 00 00 00 00 GenuntelineI.... backtrace: [<ffffffff814948ee>] kmalloc_node include/linux/slab.h:604 [inline] [<ffffffff814948ee>] kvmalloc_node+0x3e/0x100 mm/util.c:580 [<ffffffff814950f2>] kvmalloc include/linux/slab.h:732 [inline] [<ffffffff814950f2>] vmemdup_user+0x22/0x100 mm/util.c:199 [<ffffffff8109f5ff>] kvm_vcpu_ioctl_set_cpuid2+0x8f/0xf0 arch/x86/kvm/cpuid.c:423 [<ffffffff810711b9>] kvm_arch_vcpu_ioctl+0xb99/0x1e60 arch/x86/kvm/x86.c:5251 [<ffffffff8103e92d>] kvm_vcpu_ioctl+0x4ad/0x950 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4066 [<ffffffff815afacc>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff815afacc>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff815afacc>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff815afacc>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff844a3335>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff844a3335>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
CVE-2022-48762 1 Linux 1 Linux Kernel 2025-05-04 6.2 Medium
In the Linux kernel, the following vulnerability has been resolved: arm64: extable: fix load_unaligned_zeropad() reg indices In ex_handler_load_unaligned_zeropad() we erroneously extract the data and addr register indices from ex->type rather than ex->data. As ex->type will contain EX_TYPE_LOAD_UNALIGNED_ZEROPAD (i.e. 4): * We'll always treat X0 as the address register, since EX_DATA_REG_ADDR is extracted from bits [9:5]. Thus, we may attempt to dereference an arbitrary address as X0 may hold an arbitrary value. * We'll always treat X4 as the data register, since EX_DATA_REG_DATA is extracted from bits [4:0]. Thus we will corrupt X4 and cause arbitrary behaviour within load_unaligned_zeropad() and its caller. Fix this by extracting both values from ex->data as originally intended. On an MTE-enabled QEMU image we are hitting the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: fixup_exception+0xc4/0x108 __do_kernel_fault+0x3c/0x268 do_tag_check_fault+0x3c/0x104 do_mem_abort+0x44/0xf4 el1_abort+0x40/0x64 el1h_64_sync_handler+0x60/0xa0 el1h_64_sync+0x7c/0x80 link_path_walk+0x150/0x344 path_openat+0xa0/0x7dc do_filp_open+0xb8/0x168 do_sys_openat2+0x88/0x17c __arm64_sys_openat+0x74/0xa0 invoke_syscall+0x48/0x148 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0x88 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Code: f8695a69 71007d1f 540000e0 927df12a (f940014a)
CVE-2022-48756 1 Linux 1 Linux Kernel 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493860 ("Null pointer dereference")