| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix potential out-of-bounds access in 'amdgpu_discovery_reg_base_init()'
The issue arises when the array 'adev->vcn.vcn_config' is accessed
before checking if the index 'adev->vcn.num_vcn_inst' is within the
bounds of the array.
The fix involves moving the bounds check before the array access. This
ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array
before it is used as an index.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.
Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()'
In the first if statement, we're checking if 'replay' is NULL. But in
the second if statement, we're not checking if 'replay' is NULL again
before calling replay->funcs->replay_set_power_opt().
if (replay == NULL && force_static)
return false;
...
if (link->replay_settings.replay_feature_enabled &&
replay->funcs->replay_set_power_opt) {
replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst);
link->replay_settings.replay_power_opt_active = *power_opts;
}
If 'replay' is NULL, this will cause a null pointer dereference.
Fixes the below found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887) |
| In the Linux kernel, the following vulnerability has been resolved:
clk: Fix clk_core_get NULL dereference
It is possible for clk_core_get to dereference a NULL in the following
sequence:
clk_core_get()
of_clk_get_hw_from_clkspec()
__of_clk_get_hw_from_provider()
__clk_get_hw()
__clk_get_hw() can return NULL which is dereferenced by clk_core_get() at
hw->core.
Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based
clk_lookups") the check IS_ERR_OR_NULL() was performed which would have
caught the NULL.
Reading the description of this function it talks about returning NULL but
that cannot be so at the moment.
Update the function to check for hw before dereferencing it and return NULL
if hw is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
The kmalloc() in zynq_clk_setup() will return null if the
physical memory has run out. As a result, if we use snprintf()
to write data to the null address, the null pointer dereference
bug will happen.
This patch uses a stack variable to replace the kmalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic
verify_blkaddr() will trigger panic once we inject fault into
f2fs_is_valid_blkaddr(), fix to remove this unnecessary f2fs_bug_on(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt
The loop inside nfs_netfs_issue_read() currently does not disable
interrupts while iterating through pages in the xarray to submit
for NFS read. This is not safe though since after taking xa_lock,
another page in the mapping could be processed for writeback inside
an interrupt, and deadlock can occur. The fix is simple and clean
if we use xa_for_each_range(), which handles the iteration with RCU
while reducing code complexity.
The problem is easily reproduced with the following test:
mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs
dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/nfs/file1.bin of=/dev/null
umount /mnt/nfs
On the console with a lockdep-enabled kernel a message similar to
the following will be seen:
================================
WARNING: inconsistent lock state
6.7.0-lockdbg+ #10 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at:
nfs_netfs_issue_read+0x1b2/0x4b0 [nfs]
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x144/0x380
_raw_spin_lock_irqsave+0x4e/0xa0
__folio_end_writeback+0x17e/0x5c0
folio_end_writeback+0x93/0x1b0
iomap_finish_ioend+0xeb/0x6a0
blk_update_request+0x204/0x7f0
blk_mq_end_request+0x30/0x1c0
blk_complete_reqs+0x7e/0xa0
__do_softirq+0x113/0x544
__irq_exit_rcu+0xfe/0x120
irq_exit_rcu+0xe/0x20
sysvec_call_function_single+0x6f/0x90
asm_sysvec_call_function_single+0x1a/0x20
pv_native_safe_halt+0xf/0x20
default_idle+0x9/0x20
default_idle_call+0x67/0xa0
do_idle+0x2b5/0x300
cpu_startup_entry+0x34/0x40
start_secondary+0x19d/0x1c0
secondary_startup_64_no_verify+0x18f/0x19b
irq event stamp: 176891
hardirqs last enabled at (176891): [<ffffffffa67a0be4>]
_raw_spin_unlock_irqrestore+0x44/0x60
hardirqs last disabled at (176890): [<ffffffffa67a0899>]
_raw_spin_lock_irqsave+0x79/0xa0
softirqs last enabled at (176646): [<ffffffffa515d91e>]
__irq_exit_rcu+0xfe/0x120
softirqs last disabled at (176633): [<ffffffffa515d91e>]
__irq_exit_rcu+0xfe/0x120
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&xa->xa_lock#4);
<Interrupt>
lock(&xa->xa_lock#4);
*** DEADLOCK ***
2 locks held by test5/1708:
#0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at:
nfs_start_io_read+0x28/0x90 [nfs]
#1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at:
page_cache_ra_unbounded+0xa4/0x280
stack backtrace:
CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
Call Trace:
dump_stack_lvl+0x5b/0x90
mark_lock+0xb3f/0xd20
__lock_acquire+0x77b/0x3360
_raw_spin_lock+0x34/0x80
nfs_netfs_issue_read+0x1b2/0x4b0 [nfs]
netfs_begin_read+0x77f/0x980 [netfs]
nfs_netfs_readahead+0x45/0x60 [nfs]
nfs_readahead+0x323/0x5a0 [nfs]
read_pages+0xf3/0x5c0
page_cache_ra_unbounded+0x1c8/0x280
filemap_get_pages+0x38c/0xae0
filemap_read+0x206/0x5e0
nfs_file_read+0xb7/0x140 [nfs]
vfs_read+0x2a9/0x460
ksys_read+0xb7/0x140 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Use separate handlers for interrupts
For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix mmhub client id out-of-bounds access
Properly handle cid 0x140. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-mt65xx: Fix NULL pointer access in interrupt handler
The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.
Add a check to trans->tx_buf before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix missing reserved tailroom
Use rbi->len instead of rcd->len for non-dataring packet.
Found issue:
XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom
WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 6.5.1 #1
RIP: 0010:xdp_warn+0xf/0x20
...
? xdp_warn+0xf/0x20
xdp_do_redirect+0x15f/0x1c0
vmxnet3_run_xdp+0x17a/0x400 [vmxnet3]
vmxnet3_process_xdp+0xe4/0x760 [vmxnet3]
? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3]
vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3]
vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3]
__napi_poll+0x20/0x180
net_rx_action+0x177/0x390 |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: null check for nla_nest_start
nla_nest_start() may fail and return NULL. Insert a check and set errno
based on other call sites within the same source code. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: max310x: fix NULL pointer dereference in I2C instantiation
When trying to instantiate a max14830 device from userspace:
echo max14830 0x60 > /sys/bus/i2c/devices/i2c-2/new_device
we get the following error:
Unable to handle kernel NULL pointer dereference at virtual address...
...
Call trace:
max310x_i2c_probe+0x48/0x170 [max310x]
i2c_device_probe+0x150/0x2a0
...
Add check for validity of devtype to prevent the error, and abort probe
with a meaningful error message. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Always flush async #PF workqueue when vCPU is being destroyed
Always flush the per-vCPU async #PF workqueue when a vCPU is clearing its
completion queue, e.g. when a VM and all its vCPUs is being destroyed.
KVM must ensure that none of its workqueue callbacks is running when the
last reference to the KVM _module_ is put. Gifting a reference to the
associated VM prevents the workqueue callback from dereferencing freed
vCPU/VM memory, but does not prevent the KVM module from being unloaded
before the callback completes.
Drop the misguided VM refcount gifting, as calling kvm_put_kvm() from
async_pf_execute() if kvm_put_kvm() flushes the async #PF workqueue will
result in deadlock. async_pf_execute() can't return until kvm_put_kvm()
finishes, and kvm_put_kvm() can't return until async_pf_execute() finishes:
WARNING: CPU: 8 PID: 251 at virt/kvm/kvm_main.c:1435 kvm_put_kvm+0x2d/0x320 [kvm]
Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel kvm irqbypass
CPU: 8 PID: 251 Comm: kworker/8:1 Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: events async_pf_execute [kvm]
RIP: 0010:kvm_put_kvm+0x2d/0x320 [kvm]
Call Trace:
<TASK>
async_pf_execute+0x198/0x260 [kvm]
process_one_work+0x145/0x2d0
worker_thread+0x27e/0x3a0
kthread+0xba/0xe0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
INFO: task kworker/8:1:251 blocked for more than 120 seconds.
Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/8:1 state:D stack:0 pid:251 ppid:2 flags:0x00004000
Workqueue: events async_pf_execute [kvm]
Call Trace:
<TASK>
__schedule+0x33f/0xa40
schedule+0x53/0xc0
schedule_timeout+0x12a/0x140
__wait_for_common+0x8d/0x1d0
__flush_work.isra.0+0x19f/0x2c0
kvm_clear_async_pf_completion_queue+0x129/0x190 [kvm]
kvm_arch_destroy_vm+0x78/0x1b0 [kvm]
kvm_put_kvm+0x1c1/0x320 [kvm]
async_pf_execute+0x198/0x260 [kvm]
process_one_work+0x145/0x2d0
worker_thread+0x27e/0x3a0
kthread+0xba/0xe0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
If kvm_clear_async_pf_completion_queue() actually flushes the workqueue,
then there's no need to gift async_pf_execute() a reference because all
invocations of async_pf_execute() will be forced to complete before the
vCPU and its VM are destroyed/freed. And that in turn fixes the module
unloading bug as __fput() won't do module_put() on the last vCPU reference
until the vCPU has been freed, e.g. if closing the vCPU file also puts the
last reference to the KVM module.
Note that kvm_check_async_pf_completion() may also take the work item off
the completion queue and so also needs to flush the work queue, as the
work will not be seen by kvm_clear_async_pf_completion_queue(). Waiting
on the workqueue could theoretically delay a vCPU due to waiting for the
work to complete, but that's a very, very small chance, and likely a very
small delay. kvm_arch_async_page_present_queued() unconditionally makes a
new request, i.e. will effectively delay entering the guest, so the
remaining work is really just:
trace_kvm_async_pf_completed(addr, cr2_or_gpa);
__kvm_vcpu_wake_up(vcpu);
mmput(mm);
and mmput() can't drop the last reference to the page tables if the vCPU is
still alive, i.e. the vCPU won't get stuck tearing down page tables.
Add a helper to do the flushing, specifically to deal with "wakeup all"
work items, as they aren't actually work items, i.e. are never placed in a
workqueue. Trying to flush a bogus workqueue entry rightly makes
__flush_work() complain (kudos to whoever added that sanity check).
Note, commit 5f6de5cbebee ("KVM: Prevent module exit until al
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix a NULL pointer dereference
A NULL pointer dereference is triggered when probing the MMIO RAPL
driver on platforms with CPU ID not listed in intel_rapl_common CPU
model list.
This is because the intel_rapl_common module still probes on such
platforms even if 'defaults_msr' is not set after commit 1488ac990ac8
("powercap: intel_rapl: Allow probing without CPUID match"). Thus the
MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework.
Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults
is always valid. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - resolve race condition during AER recovery
During the PCI AER system's error recovery process, the kernel driver
may encounter a race condition with freeing the reset_data structure's
memory. If the device restart will take more than 10 seconds the function
scheduling that restart will exit due to a timeout, and the reset_data
structure will be freed. However, this data structure is used for
completion notification after the restart is completed, which leads
to a UAF bug.
This results in a KFENCE bug notice.
BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat]
Use-after-free read at 0x00000000bc56fddf (in kfence-#142):
adf_device_reset_worker+0x38/0xa0 [intel_qat]
process_one_work+0x173/0x340
To resolve this race condition, the memory associated to the container
of the work_struct is freed on the worker if the timeout expired,
otherwise on the function that schedules the worker.
The timeout detection can be done by checking if the caller is
still waiting for completion or not by using completion_done() function. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
