| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: glink: fix off-by-one in connector_status
UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS.
Correct the condition in the pmic_glink_ucsi_connector_status()
callback, fixing Type-C orientation reporting for the third USB-C
connector. |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: Fix ordering of iput() and watched_objects decrement
Ensure the superblock is kept alive until we're done with iput().
Holding a reference to an inode is not allowed unless we ensure the
superblock stays alive, which fsnotify does by keeping the
watched_objects count elevated, so iput() must happen before the
watched_objects decrement.
This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the
UAF is hard to hit because race orderings that oops are more likely, thanks
to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super().
Also, ensure that fsnotify_put_sb_watched_objects() doesn't call
fsnotify_sb_watched_objects() on a superblock that may have already been
freed, which would cause a UAF read of sb->s_fsnotify_info. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix possible UAF in sctp_v6_available()
A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints
that sctp_v6_available() is calling dev_get_by_index_rcu()
and ipv6_chk_addr() without holding rcu.
[1]
=============================
WARNING: suspicious RCU usage
6.12.0-rc5-virtme #1216 Tainted: G W
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by sctp_hello/31495:
#0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp
stack backtrace:
CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7))
sctp_v6_available (net/sctp/ipv6.c:701) sctp
sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp
sctp_bind (net/sctp/socket.c:320) sctp
inet6_bind_sk (net/ipv6/af_inet6.c:465)
? security_socket_bind (security/security.c:4581 (discriminator 1))
__sys_bind (net/socket.c:1848 net/socket.c:1869)
? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340)
? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13))
__x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1))
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f59b934a1e7
Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48
All code
========
0: 44 00 00 add %r8b,(%rax)
3: 48 8b 15 39 8c 0c 00 mov 0xc8c39(%rip),%rdx # 0xc8c43
a: f7 d8 neg %eax
c: 64 89 02 mov %eax,%fs:(%rdx)
f: b8 ff ff ff ff mov $0xffffffff,%eax
14: eb bd jmp 0xffffffffffffffd3
16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1)
1d: 00 00 00
20: 0f 1f 00 nopl (%rax)
23: b8 31 00 00 00 mov $0x31,%eax
28: 0f 05 syscall
2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction
30: 73 01 jae 0x33
32: c3 ret
33: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c43
3a: f7 d8 neg %eax
3c: 64 89 01 mov %eax,%fs:(%rcx)
3f: 48 rex.W
Code starting with the faulting instruction
===========================================
0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax
6: 73 01 jae 0x9
8: c3 ret
9: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c19
10: f7 d8 neg %eax
12: 64 89 01 mov %eax,%fs:(%rcx)
15: 48 rex.W
RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7
RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005
RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000
R10: 00007f59b9253298 R11: 000000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free of network namespace.
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_conne
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Lock XArray when getting entries for the VM
Similar to commit cac075706f29 ("drm/panthor: Fix race when converting
group handle to group object") we need to use the XArray's internal
locking when retrieving a vm pointer from there.
v2: Removed part of the patch that was trying to protect fetching
the heap pointer from XArray, as that operation is protected by
the @pool->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Prevent a bad reference count on CPU nodes
When populating cache leaves we previously fetched the CPU device node
at the very beginning. But when ACPI is enabled we go through a
specific branch which returns early and does not call 'of_node_put' for
the node that was acquired.
Since we are not using a CPU device node for the ACPI code anyways, we
can simply move the initialization of it just passed the ACPI block, and
we are guaranteed to have an 'of_node_put' call for the acquired node.
This prevents a bad reference count of the CPU device node.
Moreover, the previous function did not check for errors when acquiring
the device node, so a return -ENOENT has been added for that case. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier()
The scmi_dev->name is released prematurely in __scmi_device_destroy(),
which causes slab-use-after-free when accessing scmi_dev->name in
scmi_bus_notifier(). So move the release of scmi_dev->name to
scmi_device_release() to avoid slab-use-after-free.
| BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec
| Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1
|
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1
| Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT)
| Call trace:
| dump_backtrace+0x94/0x114
| show_stack+0x18/0x24
| dump_stack_lvl+0x48/0x60
| print_report+0xf4/0x5b0
| kasan_report+0xa4/0xec
| __asan_report_load1_noabort+0x20/0x2c
| strncmp+0xe4/0xec
| scmi_bus_notifier+0x5c/0x54c
| notifier_call_chain+0xb4/0x31c
| blocking_notifier_call_chain+0x68/0x9c
| bus_notify+0x54/0x78
| device_del+0x1bc/0x840
| device_unregister+0x20/0xb4
| __scmi_device_destroy+0xac/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Allocated by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_alloc_info+0x24/0x34
| __kasan_kmalloc+0xa0/0xb8
| __kmalloc_node_track_caller+0x6c/0x104
| kstrdup+0x48/0x84
| kstrdup_const+0x34/0x40
| __scmi_device_create.part.0+0x8c/0x408
| scmi_device_create+0x104/0x370
| scmi_chan_setup+0x2a0/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Freed by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_free_info+0x38/0x5c
| __kasan_slab_free+0xe8/0x164
| __kmem_cache_free+0x11c/0x230
| kfree+0x70/0x130
| kfree_const+0x20/0x40
| __scmi_device_destroy+0x70/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Start the RTC update work later
The RTC update work involves runtime resuming the UFS controller. Hence,
only start the RTC update work after runtime power management in the UFS
driver has been fully initialized. This patch fixes the following kernel
crash:
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Workqueue: events ufshcd_rtc_work
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
pm_runtime_get_if_active+0x24/0x9c (L)
pm_runtime_get_if_active+0x24/0x9c
ufshcd_rtc_work+0x138/0x1b4
process_one_work+0x148/0x288
worker_thread+0x2cc/0x3d4
kthread+0x110/0x114
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix another deadlock during RTC update
If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count
is 0, we will enter the runtime suspend callback. However, the runtime
suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock.
Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
fork: only invoke khugepaged, ksm hooks if no error
There is no reason to invoke these hooks early against an mm that is in an
incomplete state.
The change in commit d24062914837 ("fork: use __mt_dup() to duplicate
maple tree in dup_mmap()") makes this more pertinent as we may be in a
state where entries in the maple tree are not yet consistent.
Their placement early in dup_mmap() only appears to have been meaningful
for early error checking, and since functionally it'd require a very small
allocation to fail (in practice 'too small to fail') that'd only occur in
the most dire circumstances, meaning the fork would fail or be OOM'd in
any case.
Since both khugepaged and KSM tracking are there to provide optimisations
to memory performance rather than critical functionality, it doesn't
really matter all that much if, under such dire memory pressure, we fail
to register an mm with these.
As a result, we follow the example of commit d2081b2bf819 ("mm:
khugepaged: make khugepaged_enter() void function") and make ksm_fork() a
void function also.
We only expose the mm to these functions once we are done with them and
only if no error occurred in the fork operation. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Vangogh: Fix kernel memory out of bounds write
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] <TASK>
[ 33.861829] dump_stack_lvl+0x66/0x90
[ 33.861838] print_report+0xce/0x620
[ 33.861853] kasan_report+0xda/0x110
[ 33.862794] kasan_check_range+0xfd/0x1a0
[ 33.862799] __asan_memset+0x23/0x40
[ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.867135] dev_attr_show+0x43/0xc0
[ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0
[ 33.867155] seq_read_iter+0x3f8/0x1140
[ 33.867173] vfs_read+0x76c/0xc50
[ 33.867198] ksys_read+0xfb/0x1d0
[ 33.867214] do_syscall_64+0x90/0x160
...
[ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s:
[ 33.867358] kasan_save_stack+0x33/0x50
[ 33.867364] kasan_save_track+0x17/0x60
[ 33.867367] __kasan_kmalloc+0x87/0x90
[ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu]
[ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu]
[ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu]
[ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu]
[ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu]
[ 33.869608] local_pci_probe+0xda/0x180
[ 33.869614] pci_device_probe+0x43f/0x6b0
Empirically we can confirm that the former allocates 152 bytes for the
table, while the latter memsets the 168 large block.
Root cause appears that when GPU metrics tables for v2_4 parts were added
it was not considered to enlarge the table to fit.
The fix in this patch is rather "brute force" and perhaps later should be
done in a smarter way, by extracting and consolidating the part version to
size logic to a common helper, instead of brute forcing the largest
possible allocation. Nevertheless, for now this works and fixes the out of
bounds write.
v2:
* Drop impossible v3_0 case. (Mario)
(cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
Mounting btrfs from two images (which have the same one fsid and two
different dev_uuids) in certain executing order may trigger an UAF for
variable 'device->bdev_file' in __btrfs_free_extra_devids(). And
following are the details:
1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs
devices by ioctl(BTRFS_IOC_SCAN_DEV):
/ btrfs_device_1 → loop0
fs_device
\ btrfs_device_2 → loop1
2. mount /dev/loop0 /mnt
btrfs_open_devices
btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0)
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
fail: btrfs_close_devices // -ENOMEM
btrfs_close_bdev(btrfs_device_1)
fput(btrfs_device_1->bdev_file)
// btrfs_device_1->bdev_file is freed
btrfs_close_bdev(btrfs_device_2)
fput(btrfs_device_2->bdev_file)
3. mount /dev/loop1 /mnt
btrfs_open_devices
btrfs_get_bdev_and_sb(&bdev_file)
// EIO, btrfs_device_1->bdev_file is not assigned,
// which points to a freed memory area
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
btrfs_free_extra_devids
if (btrfs_device_1->bdev_file)
fput(btrfs_device_1->bdev_file) // UAF !
Fix it by setting 'device->bdev_file' as 'NULL' after closing the
btrfs_device in btrfs_close_one_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
Clang static checker(scan-build) throws below warning：
| drivers/firmware/arm_scmi/driver.c:line 2915, column 2
| Attempt to free released memory.
When devm_add_action_or_reset() fails, scmi_debugfs_common_cleanup()
will run twice which causes double free of 'dbg->name'.
Remove the redundant scmi_debugfs_common_cleanup() to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop
Driver waits indefinitely for the fifo occupancy to go below a threshold
as soon as the pacing interrupt is received. This can cause soft lockup on
one of the processors, if the rate of DB is very high.
Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th
if the loop is taking more time. Pacing will be continuing until the
occupancy is below the threshold. This is ensured by the checks in
bnxt_re_pacing_timer_exp and further scheduling the work for pacing based
on the fifo occupancy. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix possible double free in smb2_set_ea()
Clang static checker(scan-build) warning：
fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory.
1304 | kfree(ea);
| ^~~~~~~~~
There is a double free in such case:
'ea is initialized to NULL' -> 'first successful memory allocation for
ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea'
-> 'goto replay_again' -> 'second goto sea_exit before allocate memory
for ea' -> 'second memory release for ea resulted in double free'.
Re-initialie 'ea' to NULL near to the replay_again label, it can fix this
double free problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't free job in TDR
Freeing job in TDR is not safe as TDR can pass the run_job thread
resulting in UAF. It is only safe for free job to naturally be called by
the scheduler. Rather free job in TDR, add to pending list.
(cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d) |
| In the Linux kernel, the following vulnerability has been resolved:
reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC
data->asserted will be NULL on JH7110 SoC since commit 82327b127d41
("reset: starfive: Add StarFive JH7110 reset driver") was added. Add
the judgment condition to avoid errors when calling reset_control_status
on JH7110 SoC. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bpf: must hold reference on net namespace
BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0
Read of size 8 at addr ffff8880106fe400 by task repro/72=
bpf_nf_link_release+0xda/0x1e0
bpf_link_free+0x139/0x2d0
bpf_link_release+0x68/0x80
__fput+0x414/0xb60
Eric says:
It seems that bpf was able to defer the __nf_unregister_net_hook()
after exit()/close() time.
Perhaps a netns reference is missing, because the netns has been
dismantled/freed already.
bpf_nf_link_attach() does :
link->net = net;
But I do not see a reference being taken on net.
Add such a reference and release it after hook unreg.
Note that I was unable to get syzbot reproducer to work, so I
do not know if this resolves this splat. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Unregister redistributor for failed vCPU creation
Alex reports that syzkaller has managed to trigger a use-after-free when
tearing down a VM:
BUG: KASAN: slab-use-after-free in kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769
Read of size 8 at addr ffffff801c6890d0 by task syz.3.2219/10758
CPU: 3 UID: 0 PID: 10758 Comm: syz.3.2219 Not tainted 6.11.0-rc6-dirty #64
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x17c/0x1a8 arch/arm64/kernel/stacktrace.c:317
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:324
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x94/0xc0 lib/dump_stack.c:119
print_report+0x144/0x7a4 mm/kasan/report.c:377
kasan_report+0xcc/0x128 mm/kasan/report.c:601
__asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381
kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769
kvm_vm_release+0x4c/0x60 virt/kvm/kvm_main.c:1409
__fput+0x198/0x71c fs/file_table.c:422
____fput+0x20/0x30 fs/file_table.c:450
task_work_run+0x1cc/0x23c kernel/task_work.c:228
do_notify_resume+0x144/0x1a0 include/linux/resume_user_mode.h:50
el0_svc+0x64/0x68 arch/arm64/kernel/entry-common.c:169
el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Upon closer inspection, it appears that we do not properly tear down the
MMIO registration for a vCPU that fails creation late in the game, e.g.
a vCPU w/ the same ID already exists in the VM.
It is important to consider the context of commit that introduced this bug
by moving the unregistration out of __kvm_vgic_vcpu_destroy(). That
change correctly sought to avoid an srcu v. config_lock inversion by
breaking up the vCPU teardown into two parts, one guarded by the
config_lock.
Fix the use-after-free while avoiding lock inversion by adding a
special-cased unregistration to __kvm_vgic_vcpu_destroy(). This is safe
because failed vCPUs are torn down outside of the config_lock. |
