| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
binder: make sure fd closes complete
During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object
cleanup may close 1 or more fds. The close operations are
completed using the task work mechanism -- which means the thread
needs to return to userspace or the file object may never be
dereferenced -- which can lead to hung processes.
Force the binder thread back to userspace if an fd is closed during
BC_FREE_BUFFER handling. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix page leak
There's a loop in afs_extend_writeback() that adds extra pages to a write
we want to make to improve the efficiency of the writeback by making it
larger. This loop stops, however, if we hit a page we can't write back
from immediately, but it doesn't get rid of the page ref we speculatively
acquired.
This was caused by the removal of the cleanup loop when the code switched
from using find_get_pages_contig() to xarray scanning as the latter only
gets a single page at a time, not a batch.
Fix this by putting the page on a ref on an early break from the loop.
Unfortunately, we can't just add that page to the pagevec we're employing
as we'll go through that and add those pages to the RPC call.
This was found by the generic/074 test. It leaks ~4GiB of RAM each time it
is run - which can be observed with "top". |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and
Linux's afs client switches between them when talking to a non-YFS server
if the read size, the file position or the sum of the two have the upper 32
bits set of the 64-bit value.
This is a problem, however, since the file position and length fields of
FS.FetchData are *signed* 32-bit values.
Fix this by capturing the capability bits obtained from the fileserver when
it's sent an FS.GetCapabilities RPC, rather than just discarding them, and
then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be
used to decide whether to use FS.FetchData or FS.FetchData64 - and also
FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to
switch on the parameter values.
This capabilities flag could also be used to limit the maximum size of the
file, but all servers must be checked for that.
Note that the issue does not exist with FS.StoreData - that uses *unsigned*
32-bit values. It's also not a problem with Auristor servers as its
YFS.FetchData64 op uses unsigned 64-bit values.
This can be tested by cloning a git repo through an OpenAFS client to an
OpenAFS server and then doing "git status" on it from a Linux afs
client[1]. Provided the clone has a pack file that's in the 2G-4G range,
the git status will show errors like:
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
This can be observed in the server's FileLog with something like the
following appearing:
Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001
Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866
...
Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5
Note the file position of 18446744071815340032. This is the requested file
position sign-extended. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: ensure tx skbs always have the MPTCP ext
Due to signed/unsigned comparison, the expression:
info->size_goal - skb->len > 0
evaluates to true when the size goal is smaller than the
skb size. That results in lack of tx cache refill, so that
the skb allocated by the core TCP code lacks the required
MPTCP skb extensions.
Due to the above, syzbot is able to trigger the following WARN_ON():
WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Modules linked in:
CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9
RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216
RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000
RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003
RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280
R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0
FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547
mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003
release_sock+0xb4/0x1b0 net/core/sock.c:3206
sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145
mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749
inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
sock_write_iter+0x2a0/0x3e0 net/socket.c:1057
call_write_iter include/linux/fs.h:2163 [inline]
new_sync_write+0x40b/0x640 fs/read_write.c:507
vfs_write+0x7cf/0xae0 fs/read_write.c:594
ksys_write+0x1ee/0x250 fs/read_write.c:647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9
RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038
R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000
Fix the issue rewriting the relevant expression to avoid
sign-related problems - note: size_goal is always >= 0.
Additionally, ensure that the skb in the tx cache always carries
the relevant extension. |
| There is a stored Cross-site Scripting vulnerability in Esri Portal for ArcGIS versions 11.2 and below that may allow a remote, authenticated attacker to create a crafted link that can be saved as a new location when moving an existing item which will potentially execute arbitrary JavaScript code in the victim’s browser. The privileges required to execute this attack are high. |
| There is a cross site scripting vulnerability in the Esri Portal for ArcGIS Experience Builder 11.1 and below on Windows and Linux that allows a remote, unauthenticated attacker to create a crafted link which when clicked could potentially execute arbitrary JavaScript code in the victim’s browser. The privileges required to execute this attack are low. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop
up the damage. If it fails early enough, before xhci->interrupters
is allocated but after xhci->max_interrupters has been set, which
happens in most (all?) cases, things get uglier, as xhci_mem_cleanup()
unconditionally derefences xhci->interrupters. With prejudice.
Gate the interrupt freeing loop with a check on xhci->interrupters
being non-NULL.
Found while debugging a DMA allocation issue that led the XHCI driver
on this exact path. |
| An out-of-bounds memory write flaw was found in the Linux kernel’s Kid-friendly Wired Controller driver. This flaw allows a local user to crash or potentially escalate their privileges on the system. It is in bigben_probe of drivers/hid/hid-bigbenff.c. The reason is incorrect assumption - bigben devices all have inputs. However, malicious devices can break this assumption, leaking to out-of-bound write. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: prevent kernel-infoleak in con_font_get()
font.data may not initialize all memory spaces depending on the implementation
of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it
is safest to modify it to initialize the allocated memory space to 0, and it
generally does not affect the overall performance of the system. |
| In the Linux kernel before 6.6.7, an untrusted VMM can trigger int80 syscall handling at any given point. This is related to arch/x86/coco/tdx/tdx.c and arch/x86/mm/mem_encrypt_amd.c. |
| A memory leak flaw was found in the UBI driver in drivers/mtd/ubi/attach.c in the Linux kernel through 6.7.4 for UBI_IOCATT, because kobj->name is not released. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HCI: Fix potential null-ptr-deref
Fix potential null-ptr-deref in hci_le_big_sync_established_evt(). |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.
syzbot reported a warning [0] in __unix_gc() with a repro, which
creates a socketpair and sends one socket's fd to itself using the
peer.
socketpair(AF_UNIX, SOCK_STREAM, 0, [3, 4]) = 0
sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="\360", iov_len=1}],
msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET,
cmsg_type=SCM_RIGHTS, cmsg_data=[3]}],
msg_controllen=24, msg_flags=0}, MSG_OOB|MSG_PROBE|MSG_DONTWAIT|MSG_ZEROCOPY) = 1
This forms a self-cyclic reference that GC should finally untangle
but does not due to lack of MSG_OOB handling, resulting in memory
leak.
Recently, commit 11498715f266 ("af_unix: Remove io_uring code for
GC.") removed io_uring's dead code in GC and revealed the problem.
The code was executed at the final stage of GC and unconditionally
moved all GC candidates from gc_candidates to gc_inflight_list.
That papered over the reported problem by always making the following
WARN_ON_ONCE(!list_empty(&gc_candidates)) false.
The problem has been there since commit 2aab4b969002 ("af_unix: fix
struct pid leaks in OOB support") added full scm support for MSG_OOB
while fixing another bug.
To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skb
if the socket still exists in gc_candidates after purging collected skb.
Then, we need to set NULL to oob_skb before calling kfree_skb() because
it calls last fput() and triggers unix_release_sock(), where we call
duplicate kfree_skb(u->oob_skb) if not NULL.
Note that the leaked socket remained being linked to a global list, so
kmemleak also could not detect it. We need to check /proc/net/protocol
to notice the unfreed socket.
[0]:
WARNING: CPU: 0 PID: 2863 at net/unix/garbage.c:345 __unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Modules linked in:
CPU: 0 PID: 2863 Comm: kworker/u4:11 Not tainted 6.8.0-rc1-syzkaller-00583-g1701940b1a02 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Code: 8b 5c 24 50 e9 86 f8 ff ff e8 f8 e4 22 f8 31 d2 48 c7 c6 30 6a 69 89 4c 89 ef e8 97 ef ff ff e9 80 f9 ff ff e8 dd e4 22 f8 90 <0f> 0b 90 e9 7b fd ff ff 48 89 df e8 5c e7 7c f8 e9 d3 f8 ff ff e8
RSP: 0018:ffffc9000b03fba0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc9000b03fc10 RCX: ffffffff816c493e
RDX: ffff88802c02d940 RSI: ffffffff896982f3 RDI: ffffc9000b03fb30
RBP: ffffc9000b03fce0 R08: 0000000000000001 R09: fffff52001607f66
R10: 0000000000000003 R11: 0000000000000002 R12: dffffc0000000000
R13: ffffc9000b03fc10 R14: ffffc9000b03fc10 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005559c8677a60 CR3: 000000000d57a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
process_one_work+0x889/0x15e0 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x8b9/0x12a0 kernel/workqueue.c:2787
kthread+0x2c6/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: properly indicate failure when ending a failed write request
This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.
Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded). |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix inode leak on getattr error in __fh_to_dentry |
| In the Linux kernel, the following vulnerability has been resolved:
mm: migrate: fix getting incorrect page mapping during page migration
When running stress-ng testing, we found below kernel crash after a few hours:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : dentry_name+0xd8/0x224
lr : pointer+0x22c/0x370
sp : ffff800025f134c0
......
Call trace:
dentry_name+0xd8/0x224
pointer+0x22c/0x370
vsnprintf+0x1ec/0x730
vscnprintf+0x2c/0x60
vprintk_store+0x70/0x234
vprintk_emit+0xe0/0x24c
vprintk_default+0x3c/0x44
vprintk_func+0x84/0x2d0
printk+0x64/0x88
__dump_page+0x52c/0x530
dump_page+0x14/0x20
set_migratetype_isolate+0x110/0x224
start_isolate_page_range+0xc4/0x20c
offline_pages+0x124/0x474
memory_block_offline+0x44/0xf4
memory_subsys_offline+0x3c/0x70
device_offline+0xf0/0x120
......
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: Fix a potential memory leak in sony_probe()
If an error occurs after a successful usb_alloc_urb() call, usb_free_urb()
should be called. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kasan: Fix addr error caused by page alignment
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: roles: fix NULL pointer issue when put module's reference
In current design, usb role class driver will get usb_role_switch parent's
module reference after the user get usb_role_switch device and put the
reference after the user put the usb_role_switch device. However, the
parent device of usb_role_switch may be removed before the user put the
usb_role_switch. If so, then, NULL pointer issue will be met when the user
put the parent module's reference.
This will save the module pointer in structure of usb_role_switch. Then,
we don't need to find module by iterating long relations. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix possible buffer overflow
struct hci_dev_info has a fixed size name[8] field so in the event that
hdev->name is bigger than that strcpy would attempt to write past its
size, so this fixes this problem by switching to use strscpy. |
