| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/amdgpu: fix potential memleak
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed
There is a potential memleak if not call kobject_put. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix use-after-free due to delegation race
A delegation break could arrive as soon as we've called vfs_setlease. A
delegation break runs a callback which immediately (in
nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we
then exit nfs4_set_delegation without hashing the delegation, it will be
freed as soon as the callback is done with it, without ever being
removed from del_recall_lru.
Symptoms show up later as use-after-free or list corruption warnings,
usually in the laundromat thread.
I suspect aba2072f4523 "nfsd: grant read delegations to clients holding
writes" made this bug easier to hit, but I looked as far back as v3.0
and it looks to me it already had the same problem. So I'm not sure
where the bug was introduced; it may have been there from the beginning. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix mempool NULL pointer race when completing IO
dm_io_dec_pending() calls end_io_acct() first and will then dec md
in-flight pending count. But if a task is swapping DM table at same
time this can result in a crash due to mempool->elements being NULL:
task1 task2
do_resume
->do_suspend
->dm_wait_for_completion
bio_endio
->clone_endio
->dm_io_dec_pending
->end_io_acct
->wakeup task1
->dm_swap_table
->__bind
->__bind_mempools
->bioset_exit
->mempool_exit
->free_io
[ 67.330330] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
......
[ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO)
[ 67.330510] pc : mempool_free+0x70/0xa0
[ 67.330515] lr : mempool_free+0x4c/0xa0
[ 67.330520] sp : ffffff8008013b20
[ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004
[ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8
[ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800
[ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800
[ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80
[ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c
[ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd
[ 67.330563] x15: 000000000093b41e x14: 0000000000000010
[ 67.330569] x13: 0000000000007f7a x12: 0000000034155555
[ 67.330574] x11: 0000000000000001 x10: 0000000000000001
[ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000
[ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a
[ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001
[ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8
[ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970
[ 67.330609] Call trace:
[ 67.330616] mempool_free+0x70/0xa0
[ 67.330627] bio_put+0xf8/0x110
[ 67.330638] dec_pending+0x13c/0x230
[ 67.330644] clone_endio+0x90/0x180
[ 67.330649] bio_endio+0x198/0x1b8
[ 67.330655] dec_pending+0x190/0x230
[ 67.330660] clone_endio+0x90/0x180
[ 67.330665] bio_endio+0x198/0x1b8
[ 67.330673] blk_update_request+0x214/0x428
[ 67.330683] scsi_end_request+0x2c/0x300
[ 67.330688] scsi_io_completion+0xa0/0x710
[ 67.330695] scsi_finish_command+0xd8/0x110
[ 67.330700] scsi_softirq_done+0x114/0x148
[ 67.330708] blk_done_softirq+0x74/0xd0
[ 67.330716] __do_softirq+0x18c/0x374
[ 67.330724] irq_exit+0xb4/0xb8
[ 67.330732] __handle_domain_irq+0x84/0xc0
[ 67.330737] gic_handle_irq+0x148/0x1b0
[ 67.330744] el1_irq+0xe8/0x190
[ 67.330753] lpm_cpuidle_enter+0x4f8/0x538
[ 67.330759] cpuidle_enter_state+0x1fc/0x398
[ 67.330764] cpuidle_enter+0x18/0x20
[ 67.330772] do_idle+0x1b4/0x290
[ 67.330778] cpu_startup_entry+0x20/0x28
[ 67.330786] secondary_start_kernel+0x160/0x170
Fix this by:
1) Establishing pointers to 'struct dm_io' members in
dm_io_dec_pending() so that they may be passed into end_io_acct()
_after_ free_io() is called.
2) Moving end_io_acct() after free_io(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
KASAN reports a use-after-free report when doing fuzz test:
[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338
[693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621] dump_stack+0xf1/0x19b
[693354.105626] ? show_regs_print_info+0x5/0x5
[693354.105634] ? printk+0x9c/0xc3
[693354.105638] ? cpumask_weight+0x1f/0x1f
[693354.105648] print_address_description+0x70/0x360
[693354.105654] kasan_report+0x1b2/0x330
[693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105670] bfq_io_set_weight_legacy+0xd3/0x160
[693354.105675] ? bfq_cpd_init+0x20/0x20
[693354.105683] cgroup_file_write+0x3aa/0x510
[693354.105693] ? ___slab_alloc+0x507/0x540
[693354.105698] ? cgroup_file_poll+0x60/0x60
[693354.105702] ? 0xffffffff89600000
[693354.105708] ? usercopy_abort+0x90/0x90
[693354.105716] ? mutex_lock+0xef/0x180
[693354.105726] kernfs_fop_write+0x1ab/0x280
[693354.105732] ? cgroup_file_poll+0x60/0x60
[693354.105738] vfs_write+0xe7/0x230
[693354.105744] ksys_write+0xb0/0x140
[693354.105749] ? __ia32_sys_read+0x50/0x50
[693354.105760] do_syscall_64+0x112/0x370
[693354.105766] ? syscall_return_slowpath+0x260/0x260
[693354.105772] ? do_page_fault+0x9b/0x270
[693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0
[693354.105784] ? enter_from_user_mode+0x30/0x30
[693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.105875] Allocated by task 1453337:
[693354.106001] kasan_kmalloc+0xa0/0xd0
[693354.106006] kmem_cache_alloc_node_trace+0x108/0x220
[693354.106010] bfq_pd_alloc+0x96/0x120
[693354.106015] blkcg_activate_policy+0x1b7/0x2b0
[693354.106020] bfq_create_group_hierarchy+0x1e/0x80
[693354.106026] bfq_init_queue+0x678/0x8c0
[693354.106031] blk_mq_init_sched+0x1f8/0x460
[693354.106037] elevator_switch_mq+0xe1/0x240
[693354.106041] elevator_switch+0x25/0x40
[693354.106045] elv_iosched_store+0x1a1/0x230
[693354.106049] queue_attr_store+0x78/0xb0
[693354.106053] kernfs_fop_write+0x1ab/0x280
[693354.106056] vfs_write+0xe7/0x230
[693354.106060] ksys_write+0xb0/0x140
[693354.106064] do_syscall_64+0x112/0x370
[693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.106114] Freed by task 1453336:
[693354.106225] __kasan_slab_free+0x130/0x180
[693354.106229] kfree+0x90/0x1b0
[693354.106233] blkcg_deactivate_policy+0x12c/0x220
[693354.106238] bfq_exit_queue+0xf5/0x110
[693354.106241] blk_mq_exit_sched+0x104/0x130
[693354.106245] __elevator_exit+0x45/0x60
[693354.106249] elevator_switch_mq+0xd6/0x240
[693354.106253] elevator_switch+0x25/0x40
[693354.106257] elv_iosched_store+0x1a1/0x230
[693354.106261] queue_attr_store+0x78/0xb0
[693354.106264] kernfs_fop_write+0x1ab/0x280
[693354.106268] vfs_write+0xe7/0x230
[693354.106271] ksys_write+0xb0/0x140
[693354.106275] do_syscall_64+0x112/0x370
[693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca
[693354.106329] The buggy address belongs to the object at ffff888be0a35580
which belongs to the cache kmalloc-1k of size 1024
[693354.106736] The buggy address is located 228 bytes inside of
1024-byte region [ffff888be0a35580, ffff888be0a35980)
[693354.107114] The buggy address belongs to the page:
[693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0
[693354.107606] flags: 0x17ffffc0008100(slab|head)
[693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080
[693354.108020] r
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dma-debug: prevent an error message from causing runtime problems
For some drivers, that use the DMA API. This error message can be reached
several millions of times per second, causing spam to the kernel's printk
buffer and bringing the CPU usage up to 100% (so, it should be rate
limited). However, since there is at least one driver that is in the
mainline and suffers from the error condition, it is more useful to
err_printk() here instead of just rate limiting the error message (in hopes
that it will make it easier for other drivers that suffer from this issue
to be spotted). |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix use after free on rmmod
plat_dev->dev->platform_data is released by platform_device_unregister(),
use of pclk and hclk is a use-after-free. Since device unregister won't
need a clk device we adjust the function call sequence to fix this issue.
[ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci]
[ 31.275563] Freed by task 306:
[ 30.276782] platform_device_release+0x25/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: fix various gadget panics on 10gbps cabling
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: tusb6010: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Teardown PV features on boot CPU as well
Various PV features (Async PF, PV EOI, steal time) work through memory
shared with hypervisor and when we restore from hibernation we must
properly teardown all these features to make sure hypervisor doesn't
write to stale locations after we jump to the previously hibernated kernel
(which can try to place anything there). For secondary CPUs the job is
already done by kvm_cpu_down_prepare(), register syscore ops to do
the same for boot CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Disable kvmclock on all CPUs on shutdown
Currenly, we disable kvmclock from machine_shutdown() hook and this
only happens for boot CPU. We need to disable it for all CPUs to
guard against memory corruption e.g. on restore from hibernate.
Note, writing '0' to kvmclock MSR doesn't clear memory location, it
just prevents hypervisor from updating the location so for the short
while after write and while CPU is still alive, the clock remains usable
and correct so we don't need to switch to some other clocksource. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet/pep: refuse to enable an unbound pipe
This ioctl() implicitly assumed that the socket was already bound to
a valid local socket name, i.e. Phonet object. If the socket was not
bound, two separate problems would occur:
1) We'd send an pipe enablement request with an invalid source object.
2) Later socket calls could BUG on the socket unexpectedly being
connected yet not bound to a valid object. |
| In affected versions of Octopus Deploy it is possible to bypass rate limiting on login using null bytes. |
| drivers/char/pcmcia/synclink_cs.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling ioctl, aka a race condition between mgslpc_ioctl and mgslpc_detach. |
| Joplin version 2.8.8 allows an external attacker to execute arbitrary commands remotely on any client that opens a link in a malicious markdown file, via Joplin. This is possible because the application does not properly validate the schema/protocol of existing links in the markdown file before passing them to the 'shell.openExternal' function. |
| Gridea version 0.9.3 allows an external attacker to execute arbitrary code remotely on any client attempting to view a malicious markdown file through Gridea. This is possible because the application has the 'nodeIntegration' option enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: don't free NULL coalescing rule
If the parsing fails, we can dereference a NULL pointer here. |
| An issue was discovered in Hashicorp Packer before 2.3.1. The recommended sudoers configuration for Vagrant on Linux is insecure. If the host has been configured according to this documentation, non-privileged users on the host can leverage a wildcard in the sudoers configuration to execute arbitrary commands as root. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: avoid reading out of bounds when loading TX power FW elements
Because the loop-expression will do one more time before getting false from
cond-expression, the original code copied one more entry size beyond valid
region.
Fix it by moving the entry copy to loop-body. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading
When unload the btnxpuart driver, its associated timer will be deleted.
If the timer happens to be modified at this moment, it leads to the
kernel call this timer even after the driver unloaded, resulting in
kernel panic.
Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming.
panic log:
Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP
Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart]
CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1
Hardware name: NXP i.MX95 19X19 board (DT)
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0xffff80007a2cf464
lr : call_timer_fn.isra.0+0x24/0x80
...
Call trace:
0xffff80007a2cf464
__run_timers+0x234/0x280
run_timer_softirq+0x20/0x40
__do_softirq+0x100/0x26c
____do_softirq+0x10/0x1c
call_on_irq_stack+0x24/0x4c
do_softirq_own_stack+0x1c/0x2c
irq_exit_rcu+0xc0/0xdc
el0_interrupt+0x54/0xd8
__el0_irq_handler_common+0x18/0x24
el0t_64_irq_handler+0x10/0x1c
el0t_64_irq+0x190/0x194
Code: ???????? ???????? ???????? ???????? (????????)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0,c0000000,40028143,1000721b
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- |
