| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Add some bounds checking to firmware data
Smatch complains about "head->full_size - head->header_size" can
underflow. To some extent, we're always going to have to trust the
firmware a bit. However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix hashtab overflow check on 32-bit arches
The hashtab code relies on roundup_pow_of_two() to compute the number of
hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code. So apply the same
fix to hashtab, by moving the overflow check to before the roundup. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix refcnt handling in __inet_hash_connect().
syzbot reported a warning in sk_nulls_del_node_init_rcu().
The commit 66b60b0c8c4a ("dccp/tcp: Unhash sk from ehash for tb2 alloc
failure after check_estalblished().") tried to fix an issue that an
unconnected socket occupies an ehash entry when bhash2 allocation fails.
In such a case, we need to revert changes done by check_established(),
which does not hold refcnt when inserting socket into ehash.
So, to revert the change, we need to __sk_nulls_add_node_rcu() instead
of sk_nulls_add_node_rcu().
Otherwise, sock_put() will cause refcnt underflow and leak the socket.
[0]:
WARNING: CPU: 0 PID: 23948 at include/net/sock.h:799 sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Modules linked in:
CPU: 0 PID: 23948 Comm: syz-executor.2 Not tainted 6.8.0-rc6-syzkaller-00159-gc055fc00c07b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
RIP: 0010:sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799
Code: e8 7f 71 c6 f7 83 fb 02 7c 25 e8 35 6d c6 f7 4d 85 f6 0f 95 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 1b 6d c6 f7 90 <0f> 0b 90 eb b2 e8 10 6d c6 f7 4c 89 e7 be 04 00 00 00 e8 63 e7 d2
RSP: 0018:ffffc900032d7848 EFLAGS: 00010246
RAX: ffffffff89cd0035 RBX: 0000000000000001 RCX: 0000000000040000
RDX: ffffc90004de1000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 1ffff1100439ac26 R08: ffffffff89ccffe3 R09: 1ffff1100439ac28
R10: dffffc0000000000 R11: ffffed100439ac29 R12: ffff888021cd6140
R13: dffffc0000000000 R14: ffff88802a9bf5c0 R15: ffff888021cd6130
FS: 00007f3b823f16c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3b823f0ff8 CR3: 000000004674a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__inet_hash_connect+0x140f/0x20b0 net/ipv4/inet_hashtables.c:1139
dccp_v6_connect+0xcb9/0x1480 net/dccp/ipv6.c:956
__inet_stream_connect+0x262/0xf30 net/ipv4/af_inet.c:678
inet_stream_connect+0x65/0xa0 net/ipv4/af_inet.c:749
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f3b8167dda9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3b823f10c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f3b817abf80 RCX: 00007f3b8167dda9
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00007f3b823f1120 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 000000000000000b R14: 00007f3b817abf80 R15: 00007ffd3beb57b8
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix underflow in parse_server_interfaces()
In this loop, we step through the buffer and after each item we check
if the size_left is greater than the minimum size we need. However,
the problem is that "bytes_left" is type ssize_t while sizeof() is type
size_t. That means that because of type promotion, the comparison is
done as an unsigned and if we have negative bytes left the loop
continues instead of ending. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_limit: reject configurations that cause integer overflow
Reject bogus configs where internal token counter wraps around.
This only occurs with very very large requests, such as 17gbyte/s.
Its better to reject this rather than having incorrect ratelimit. |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Handle size overflow for ringbuf mmap
The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries
will overflow u32 when mapping producer page and data pages. Only
casting max_entries to size_t is not enough, because for 32-bits
application on 64-bits kernel the size of read-only mmap region
also could overflow size_t.
So fixing it by casting the size of read-only mmap region into a __u64
and checking whether or not there will be overflow during mmap. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-dv-timings.c: fix too strict blanking sanity checks
Sanity checks were added to verify the v4l2_bt_timings blanking fields
in order to avoid integer overflows when userspace passes weird values.
But that assumed that userspace would correctly fill in the front porch,
backporch and sync values, but sometimes all you know is the total
blanking, which is then assigned to just one of these fields.
And that can fail with these checks.
So instead set a maximum for the total horizontal and vertical
blanking and check that each field remains below that.
That is still sufficient to avoid integer overflows, but it also
allows for more flexibility in how userspace fills in these fields. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: rndis: prevent integer overflow in rndis_set_response()
If "BufOffset" is very large the "BufOffset + 8" operation can have an
integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix off by one in BIOS boundary checking
Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.
This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
of: fdt: fix off-by-one error in unflatten_dt_nodes()
Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree")
forgot to fix up the depth check in the loop body in unflatten_dt_nodes()
which makes it possible to overflow the nps[] buffer...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: topology: fix possible overflow in amu_fie_setup()
cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*,
while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'.
Multiplying max frequency by 1000 can potentially result in overflow --
multiplying by 1000ULL instead should avoid that...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iova: Fix alloc iova overflows issue
In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.
This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.
Example log as follows:
[ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff
2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.
After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields
Overflowing either addrlimit or bytes_togo can allow userspace to trigger
a buffer overflow of kernel memory. Check for overflows in all the places
doing math on user controlled buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Fix potential VPE leak on error
In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.
Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.
[maz: fixed commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
neighbour: allow NUD_NOARP entries to be forced GCed
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.
This behaviour is more prevalent after commit 58956317c8de ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of
temperature calculations") addressed a number of underflow situations
when writing temperature limits. However, it missed one situation, seen
when an attempt is made to set the hysteresis value to MAX_LONG and the
critical temperature limit is negative.
Use clamp_val() when setting the hysteresis temperature to ensure that
the provided value can never overflow or underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix off by one in hdmi_14_process_transaction()
The hdcp_i2c_offsets[] array did not have an entry for
HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one
read overflow. I added an entry and copied the 0x0 value for the offset
from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c.
I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX
entries. This doesn't change the code, but it's just a belt and
suspenders approach to try future proof the code. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: efi: Use local variable for calculating final log size
When tpm_read_log_efi is called multiple times, which happens when
one loads and unloads a TPM2 driver multiple times, then the global
variable efi_tpm_final_log_size will at some point become a negative
number due to the subtraction of final_events_preboot_size occurring
each time. Use a local variable to avoid this integer underflow.
The following issue is now resolved:
Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20
Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4
Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206
Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f
Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d
Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073
Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5
Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018
Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000
Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0
Mar 8 15:35:12 hibinst kernel: Call Trace:
Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7
Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0
Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260
Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370
Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0
Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370 |
| In the Linux kernel, the following vulnerability has been resolved:
tools/power turbostat: Fix offset overflow issue in index converting
The idx_to_offset() function returns type int (32-bit signed), but
MSR_PKG_ENERGY_STAT is u32 and would be interpreted as a negative number.
The end result is that it hits the if (offset < 0) check in update_msr_sum()
which prevents the timer callback from updating the stat in the background when
long durations are used. The similar issue exists in offset_to_idx() and
update_msr_sum(). Fix this issue by converting the 'int' to 'off_t' accordingly. |
| Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
