| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OS Command Injection vulnerability in Ruijie M18 EW_3.0(1)B11P226_M18_10223116 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_config/config_retain.lua. |
| OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR860 allowing attackers to execute arbitrary commands via a crafted POST request to the network_set_wan_conf in file /usr/lib/lua/luci/controller/admin/netport.lua. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Validate length in packet header before skb_put()
When receiving a vsock packet in the guest, only the virtqueue buffer
size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately,
virtio_vsock_skb_rx_put() uses the length from the packet header as the
length argument to skb_put(), potentially resulting in SKB overflow if
the host has gone wonky.
Validate the length as advertised by the packet header before calling
virtio_vsock_skb_rx_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: nbpfaxi: Fix memory corruption in probe()
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result. |
| GIMP ICNS File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of ICNS files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27684. |
| GIMP HDR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27803. |
| GIMP DCM File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DCM files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27863. |
| Out-of-bounds write for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in Safari 26.2, iOS 18.7.3 and iPadOS 18.7.3, iOS 26.2 and iPadOS 26.2, macOS Tahoe 26.2, visionOS 26.2. Processing maliciously crafted web content may lead to an unexpected process crash. |
| In GnuPG before 2.4.9, armor_filter in g10/armor.c has two increments of an index variable where one is intended, leading to an out-of-bounds write for crafted input. (For ExtendedLTS, 2.2.51 and later are fixed versions.) |
| A vulnerability was detected in floooh sokol up to 16cbcc864012898793cd2bc57f802499a264ea40. The impacted element is the function _sg_pipeline_desc_defaults in the library sokol_gfx.h. The manipulation results in stack-based buffer overflow. The attack requires a local approach. The exploit is now public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is identified as 5d11344150973f15e16d3ec4ee7550a73fb995e0. It is advisable to implement a patch to correct this issue. |
| Signal K Server is a server application that runs on a central hub in a boat. Prior to version 2.19.0, an unauthenticated attacker can pollute the internal state (`restoreFilePath`) of the server via the `/skServer/validateBackup` endpoint. This allows the attacker to hijack the administrator's "Restore" functionality to overwrite critical server configuration files (e.g., `security.json`, `package.json`), leading to account takeover and Remote Code Execution (RCE). Version 2.19.0 patches this vulnerability. |
| RAGFlow is an open-source RAG (Retrieval-Augmented Generation) engine. In versions prior to 0.23.0, a low-privileged authenticated user (normal login account) can execute arbitrary system commands on the server host process via the frontend Canvas CodeExec component, completely bypassing sandbox isolation. This occurs because untrusted data (stdout) is parsed using eval() with no filtering or sandboxing. The intended design was to "automatically convert string results into Python objects," but this effectively executes attacker-controlled code. Additional endpoints lack access control or contain inverted permission logic, significantly expanding the attack surface and enabling chained exploitation. Version 0.23.0 contains a patch for the issue. |
| An issue was discovered in Dolby UDC 4.5 through 4.13. A crash of the DD+ decoder process can occur when a malformed DD+ bitstream is processed. When Evolution data is processed by evo_priv.c from the DD+ bitstream, the decoder writes that data into a buffer. The length calculation for a write can overflow due to an integer wraparound. This can lead to the allocated buffer being too small, and the out-of-bounds check of the subsequent write to be ineffective, leading to an out-of-bounds write. |
| A vulnerability was found in WebAssembly wabt 1.0.36 and classified as critical. This issue affects the function wabt::interp::(anonymous namespace)::BinaryReaderInterp::OnExport of the file wabt/src/interp/binary-reader-interp.cc of the component Malformed File Handler. The manipulation leads to heap-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in the File Storage Directory Mount Path functionality allows users with application/service management permissions to execute arbitrary commands as root on managed servers. The file_storage_directory_source parameter is passed directly to shell commands without proper sanitization, enabling full remote code execution on the host system. Version 4.0.0-beta.451 fixes the issue. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in the Dynamic Proxy Configuration Filename handling allows users with application/service management permissions to execute arbitrary commands as root on managed servers. Proxy configuration filenames are passed to shell commands without proper escaping, enabling full remote code execution. Version 4.0.0-beta.451 fixes the issue. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in PostgreSQL Init Script Filename handling allows users with application/service management permissions to execute arbitrary commands as root on managed servers. PostgreSQL initialization script filenames are passed to shell commands without proper validation, enabling full remote code execution. Version 4.0.0-beta.451 fixes the issue. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.451, an authenticated command injection vulnerability in the Database Import functionality allows users with application/service management permissions to execute arbitrary commands as root on managed servers. Database names used in import operations are passed directly to shell commands without sanitization, enabling full remote code execution. Version 4.0.0-beta.451 fixes the issue. |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following version:
QTS 5.2.8.3332 build 20251128 and later |
