| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in ZSPACE Z4Pro+ 1.0.0440024. The impacted element is the function zfilev2_api_CloseSafe of the file /v2/file/safe/close of the component HTTP POST Request Handler. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. |
| A vulnerability was detected in D-Link DIR-605 202WWB03. Affected by this issue is some unknown functionality of the component Firmware Update Service. Performing manipulation results in command injection. The attack can be initiated remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pnv_php: Clean up allocated IRQs on unplug
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
[bhelgaas: tidy comments] |
| When loading a plist file, the plistlib module reads data in size specified by the file itself, meaning a malicious file can cause OOM and DoS issues |
| A security vulnerability has been detected in TRENDnet TEW-800MB 1.0.1.0. Affected is the function do_setWizard_asp of the file /goform/wizardset of the component Management Interface. The manipulation of the argument WizardConfigured leads to command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in TRENDnet TEW-800MB 1.0.1.0. Affected by this vulnerability is the function sub_F934 of the file NTPSyncWithHost.cgi. The manipulation results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in TRENDnet TEW-822DRE 1.00B21/1.01B06. This affects the function sub_43ACF4 of the file /boafrm/formWsc. Such manipulation of the argument peerPin leads to command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Signal K Server is a server application that runs on a central hub in a boat. A Denial of Service (DoS) vulnerability in versions prior to 2.19.0 allows an unauthenticated attacker to crash the SignalK Server by flooding the access request endpoint (`/signalk/v1/access/requests`). This causes a "JavaScript heap out of memory" error due to unbounded in-memory storage of request objects. Version 2.19.0 fixes the issue. |
| Linksys E5600 V1.1.0.26 is vulnerable to command injection in the runtime.macClone function via the mc.ip parameter. |
| linksys E5600 V1.1.0.26 is vulnerable to command injection in the function ddnsStatus. |
| A command injection vulnerability in the me.connectify.SMJobBlessHelper XPC service of Speedify VPN up to v15.0.0 allows attackers to execute arbitrary commands with root-level privileges. |
| An allocation of resources without limits or throttling vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to prevent other systems, applications, or processes from accessing the same type of resource.
We have already fixed the vulnerability in the following versions:
QTS 5.2.6.3195 build 20250715 and later
QuTS hero h5.2.6.3195 build 20250715 and later |
| An allocation of resources without limits or throttling vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to prevent other systems, applications, or processes from accessing the same type of resource.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.1.3250 build 20250912 and later |
| AVTECH SECURITY Corporation DGM1104 FullImg-1015-1004-1006-1003 was discovered to contain an authenticated command injection vulnerability in the test_mail function. This vulnerability allows attackers to execute arbitrary commands via a crafted input. |
| Netgear EX8000 V1.0.0.126 is vulnerable to Command Injection via the iface parameter in the action_bandwidth function. |
| Anaconda3 macOS installers before 2024.06-1 contain a local privilege escalation vulnerability when installed outside the user's home directory. During installation, world-writable files are created and executed with root privileges. This allows a local low-privileged user to inject arbitrary commands, leading to code execution as the root user. |
| Miniconda3 macOS installers before 23.11.0-1 contain a local privilege escalation vulnerability when installed outside the user's home directory. During installation, world-writable files are created and executed with root privileges. This flaw allows a local low-privileged user to inject arbitrary commands, leading to code execution as the root user. |
| Fetch FTP Client 5.8.2 contains a denial of service vulnerability that allows attackers to trigger 100% CPU consumption by sending long server responses. Attackers can send specially crafted FTP server responses exceeding 2K bytes to cause excessive resource utilization and potentially crash the application. |
| A weakness has been identified in D-Link DIR-806A 100CNb11. Affected is the function ssdpcgi_main of the component SSDP Request Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Mark IRQ entries to fix stack depot warnings
The stack depot filters out everything outside of the top interrupt
context as an uninteresting or irrelevant part of the stack traces. This
helps with stack trace de-duplication, avoiding an explosion of saved
stack traces that share the same IRQ context code path but originate
from different randomly interrupted points, eventually exhausting the
stack depot.
Filtering uses in_irqentry_text() to identify functions within the
.irqentry.text and .softirqentry.text sections, which then become the
last stack trace entries being saved.
While __do_softirq() is placed into the .softirqentry.text section by
common code, populating .irqentry.text is architecture-specific.
Currently, the .irqentry.text section on s390 is empty, which prevents
stack depot filtering and de-duplication and could result in warnings
like:
Stack depot reached limit capacity
WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8
with PREEMPT and KASAN enabled.
Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into
the .irqentry.text section and updating the kprobes blacklist to include
the .irqentry.text section.
This is done only for asynchronous interrupts and explicitly not for
program checks, which are synchronous and where the context beyond the
program check is important to preserve. Despite machine checks being
somewhat in between, they are extremely rare, and preserving context
when possible is also of value.
SVCs and Restart Interrupts are not relevant, one being always at the
boundary to user space and the other being a one-time thing.
IRQ entries filtering is also optionally used in ftrace function graph,
where the same logic applies. |
