| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security vulnerability has been detected in WebAssembly wabt up to 1.0.39. This issue affects the function wabt::Decompiler::VarName of the file /src/repro/wabt/bin/wasm-decompile of the component wasm-decompile. Such manipulation leads to out-of-bounds read. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. Unfortunately, the project has no active maintainer at the moment. In a reply to the issue report somebody recommended to the researcher to provide a PR himself. |
| A vulnerability was detected in wasm3 up to 0.5.0. Impacted is the function op_SetSlot_i32/op_CallIndirect of the file m3_exec.h. Performing manipulation results in memory corruption. The attack needs to be approached locally. The exploit is now public and may be used. Unfortunately, the project has no active maintainer at the moment. |
| A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formP2PLimitConfig. Such manipulation of the argument except leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: check local interfaces before deleting sdata list
syzkaller reported a corrupted list in ieee802154_if_remove. [1]
Remove an IEEE 802.15.4 network interface after unregister an IEEE 802.15.4
hardware device from the system.
CPU0 CPU1
==== ====
genl_family_rcv_msg_doit ieee802154_unregister_hw
ieee802154_del_iface ieee802154_remove_interfaces
rdev_del_virtual_intf_deprecated list_del(&sdata->list)
ieee802154_if_remove
list_del_rcu
The net device has been unregistered, since the rcu grace period,
unregistration must be run before ieee802154_if_remove.
To avoid this issue, add a check for local->interfaces before deleting
sdata list.
[1]
kernel BUG at lib/list_debug.c:58!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 6277 Comm: syz-executor157 Not tainted 6.12.0-rc6-syzkaller-00005-g557329bcecc2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__list_del_entry_valid_or_report+0xf4/0x140 lib/list_debug.c:56
Code: e8 a1 7e 00 07 90 0f 0b 48 c7 c7 e0 37 60 8c 4c 89 fe e8 8f 7e 00 07 90 0f 0b 48 c7 c7 40 38 60 8c 4c 89 fe e8 7d 7e 00 07 90 <0f> 0b 48 c7 c7 a0 38 60 8c 4c 89 fe e8 6b 7e 00 07 90 0f 0b 48 c7
RSP: 0018:ffffc9000490f3d0 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: d211eee56bb28d00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffff88805b278dd8 R08: ffffffff8174a12c R09: 1ffffffff2852f0d
R10: dffffc0000000000 R11: fffffbfff2852f0e R12: dffffc0000000000
R13: dffffc0000000000 R14: dead000000000100 R15: ffff88805b278cc0
FS: 0000555572f94380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056262e4a3000 CR3: 0000000078496000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:124 [inline]
__list_del_entry include/linux/list.h:215 [inline]
list_del_rcu include/linux/rculist.h:157 [inline]
ieee802154_if_remove+0x86/0x1e0 net/mac802154/iface.c:687
rdev_del_virtual_intf_deprecated net/ieee802154/rdev-ops.h:24 [inline]
ieee802154_del_iface+0x2c0/0x5c0 net/ieee802154/nl-phy.c:323
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357
netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:744
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2607
___sys_sendmsg net/socket.c:2661 [inline]
__sys_sendmsg+0x292/0x380 net/socket.c:2690
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
x86/xen: don't do PV iret hypercall through hypercall page
Instead of jumping to the Xen hypercall page for doing the iret
hypercall, directly code the required sequence in xen-asm.S.
This is done in preparation of no longer using hypercall page at all,
as it has shown to cause problems with speculation mitigations.
This is part of XSA-466 / CVE-2024-53241. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
It's observed that a crash occurs during hot-remove a memory device,
in which user is accessing the hugetlb. See calltrace as following:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790
Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s
mirror dm_region_hash dm_log dm_mod
CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ #492
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:do_user_addr_fault+0x2a0/0x790
Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41
RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046
RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658
R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000
FS: 00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x8d/0x190
? do_user_addr_fault+0x2a0/0x790
? report_bug+0x1c3/0x1d0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? do_user_addr_fault+0x2a0/0x790
? exc_page_fault+0x31/0x200
exc_page_fault+0x68/0x200
<...snip...>
BUG: unable to handle page fault for address: 0000000000001000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
---[ end trace 0000000000000000 ]---
BUG: unable to handle page fault for address: 0000000000001000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 14045 Comm: daxctl Kdump: loaded Tainted: G W 6.10.0-rc2-lizhijian+ #492
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dentry_name+0x1f4/0x440
<...snip...>
? dentry_name+0x2fa/0x440
vsnprintf+0x1f3/0x4f0
vprintk_store+0x23a/0x540
vprintk_emit+0x6d/0x330
_printk+0x58/0x80
dump_mapping+0x10b/0x1a0
? __pfx_free_object_rcu+0x10/0x10
__dump_page+0x26b/0x3e0
? vprintk_emit+0xe0/0x330
? _printk+0x58/0x80
? dump_page+0x17/0x50
dump_page+0x17/0x50
do_migrate_range+0x2f7/0x7f0
? do_migrate_range+0x42/0x7f0
? offline_pages+0x2f4/0x8c0
offline_pages+0x60a/0x8c0
memory_subsys_offline+0x9f/0x1c0
? lockdep_hardirqs_on+0x77/0x100
? _raw_spin_unlock_irqrestore+0x38/0x60
device_offline+0xe3/0x110
state_store+0x6e/0xc0
kernfs_fop_write_iter+0x143/0x200
vfs_write+0x39f/0x560
ksys_write+0x65/0xf0
do_syscall_64+0x62/0x130
Previously, some sanity check have been done in dump_mapping() before
the print facility parsing '%pd' though, it's still possible to run into
an invalid dentry.d_name.name.
Since dump_mapping() only needs to dump the filename only, retrieve it
by itself in a safer way to prevent an unnecessary crash.
Note that either retrieving the filename with '%pd' or
strncpy_from_kernel_nofault(), the filename could be unreliable. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()
For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is
defined as NR_CPUS instead of the number of possible cpus, this
will cause the following system panic:
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
...
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1
...
BUG: unable to handle page fault for address: ffffffff9911c8c8
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W
6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6
RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0
RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082
CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0
Call Trace:
<TASK>
? __die+0x23/0x80
? page_fault_oops+0xa4/0x180
? exc_page_fault+0x152/0x180
? asm_exc_page_fault+0x26/0x40
? rcu_tasks_need_gpcb+0x25d/0x2c0
? __pfx_rcu_tasks_kthread+0x40/0x40
rcu_tasks_one_gp+0x69/0x180
rcu_tasks_kthread+0x94/0xc0
kthread+0xe8/0x140
? __pfx_kthread+0x40/0x40
ret_from_fork+0x34/0x80
? __pfx_kthread+0x40/0x40
ret_from_fork_asm+0x1b/0x80
</TASK>
Considering that there may be holes in the CPU numbers, use the
maximum possible cpu number, instead of nr_cpu_ids, for configuring
enqueue and dequeue limits.
[ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] |
| In the Linux kernel, the following vulnerability has been resolved:
efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
(SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an
inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
the bus may corrupt the packet payload and the corrupt data may
cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read
request size and maximum payload size to 128 bytes. Add workaround
for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and
later versions of the silicon will have this fixed.
[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: fail closed if we can't get max channel used in indirection tables
Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: core: Prevent USB core invalid event buffer address access
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()
xattr in ocfs2 maybe 'non-indexed', which saved with additional space
requested. It's better to check if the memory is out of bound before
memcmp, although this possibility mainly comes from crafted poisonous
images. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: add bounds checking to ocfs2_check_dir_entry()
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix UBSAN warning in kv_dpm.c
Adds bounds check for sumo_vid_mapping_entry. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Enforce hcall result buffer validity and size
plpar_hcall(), plpar_hcall9(), and related functions expect callers to
provide valid result buffers of certain minimum size. Currently this
is communicated only through comments in the code and the compiler has
no idea.
For example, if I write a bug like this:
long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE
plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...);
This compiles with no diagnostics emitted, but likely results in stack
corruption at runtime when plpar_hcall9() stores results past the end
of the array. (To be clear this is a contrived example and I have not
found a real instance yet.)
To make this class of error less likely, we can use explicitly-sized
array parameters instead of pointers in the declarations for the hcall
APIs. When compiled with -Warray-bounds[1], the code above now
provokes a diagnostic like this:
error: array argument is too small;
is of size 32, callee requires at least 72 [-Werror,-Warray-bounds]
60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf,
| ^ ~~~~~~
[1] Enabled for LLVM builds but not GCC for now. See commit
0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and
related changes. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U <<
task_tag will out of bounds for a u32 mask. Fix this up to prevent
SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type).
[name:debug_monitors&]Unexpected kernel BRK exception at EL1
[name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP
[name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done
[name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000
[name:mrdump&]PHYS_OFFSET: 0x80000000
[name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO)
[name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288
[name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c
[name:mrdump&]sp : ffffffc0081471b0
<snip>
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0xf8/0x144
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x9c
dump_stack+0x18/0x44
mrdump_common_die+0x254/0x480 [mrdump]
ipanic_die+0x20/0x30 [mrdump]
notify_die+0x15c/0x204
die+0x10c/0x5f8
arm64_notify_die+0x74/0x13c
do_debug_exception+0x164/0x26c
el1_dbg+0x64/0x80
el1h_64_sync_handler+0x3c/0x90
el1h_64_sync+0x68/0x6c
ufshcd_clear_cmd+0x280/0x288
ufshcd_wait_for_dev_cmd+0x3e4/0x82c
ufshcd_exec_dev_cmd+0x5bc/0x9ac
ufshcd_verify_dev_init+0x84/0x1c8
ufshcd_probe_hba+0x724/0x1ce0
ufshcd_host_reset_and_restore+0x260/0x574
ufshcd_reset_and_restore+0x138/0xbd0
ufshcd_err_handler+0x1218/0x2f28
process_one_work+0x5fc/0x1140
worker_thread+0x7d8/0xe20
kthread+0x25c/0x468
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: handle isoc Babble and Buffer Overrun events properly
xHCI 4.9 explicitly forbids assuming that the xHC has released its
ownership of a multi-TRB TD when it reports an error on one of the
early TRBs. Yet the driver makes such assumption and releases the TD,
allowing the remaining TRBs to be freed or overwritten by new TDs.
The xHC should also report completion of the final TRB due to its IOC
flag being set by us, regardless of prior errors. This event cannot
be recognized if the TD has already been freed earlier, resulting in
"Transfer event TRB DMA ptr not part of current TD" error message.
Fix this by reusing the logic for processing isoc Transaction Errors.
This also handles hosts which fail to report the final completion.
Fix transfer length reporting on Babble errors. They may be caused by
device malfunction, no guarantee that the buffer has been filled. |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.16.0. Affected by this issue is the function MavlinkLogHandler::state_listing/MavlinkLogHandler::log_entry_from_id of the file src/modules/mavlink/mavlink_log_handler.cpp. The manipulation results in stack-based buffer overflow. The attack is only possible with local access. The patch is identified as 338595edd1d235efd885fd5e9f45e7f9dcf4013d. It is best practice to apply a patch to resolve this issue. |
| A vulnerability was identified in Tenda AC23 16.03.07.52. This impacts the function fromSetIpMacBind of the file /goform/SetIpMacBind. Such manipulation of the argument bindnum leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
