| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid credentials for a user account with the role of Administrator or AAA Administrator. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could exploit a vulnerability in the JavaScript Task Runner sandbox to execute arbitrary code outside the sandbox boundary. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to limit the blast radius. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| A weakness has been identified in feiyuchuixue sz-boot-parent up to 1.3.2-beta. This vulnerability affects unknown code of the file /api/admin/common/files/download. Executing a manipulation of the argument url can lead to server-side request forgery. The attack can be executed remotely. Attacks of this nature are highly complex. It is stated that the exploitability is difficult. Upgrading to version 1.3.3-beta is able to resolve this issue. This patch is called aefaabfd7527188bfba3c8c9eee17c316d094802. Upgrading the affected component is advised. The project was informed beforehand and acted very professional: "We have added a URL protocol whitelist validation to the file download interface, allowing only http and https protocols." |
| Model Context Protocol Servers is a collection of reference implementations for the model context protocol (MCP). In mcp-server-git versions prior to 2026.1.14, the git_add tool did not validate that file paths provided in the files argument were within the repository boundaries. Because the tool used GitPython's repo.index.add() rather than the Git CLI, relative paths containing `../` sequences that resolve outside the repository were accepted and staged into the Git index. Users are advised to upgrade to 2026.1.14 or newer to remediate this issue. |
| The Worry Proof Backup plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 0.2.4 via the backup upload functionality. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload a malicious ZIP archive with path traversal sequences to write arbitrary files anywhere on the server, including executable PHP files. This can lead to remote code execution. |
| The User Registration & Membership plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.2. This is due to incorrect authentication in the 'register_member' function. This makes it possible for unauthenticated attackers to log in a newly registered user on the site who has the 'urm_user_just_created' user meta set. |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the LLDP process to restart, which could cause an affected device to reload unexpectedly.
This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). |
| A vulnerability in the CLI and web-based management interface of Cisco UCS Manager Software could allow an authenticated, remote attacker with valid administrative privileges to execute arbitrary commands on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation of command arguments that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of an affected device with root-level privileges. |
| A vulnerability in the NX-OS CLI privilege levels of Cisco UCS Manager Software could allow an authenticated, local attacker with read-only privileges to modify files and perform unauthorized actions on an affected system.
This vulnerability exists because unnecessary privileges are given to the user. An attacker could exploit this vulnerability by authenticating to a device as a read-only user and connecting to the NX-OS CLI. A successful exploit could allow the attacker to create or overwrite files in the file system or perform limited privileged actions on an affected device. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper processing when parsing SNMP requests. An attacker could exploit this vulnerability by continuously sending SNMP queries to a specific MIB of an affected device. A successful exploit could allow the attacker to cause a kernel panic on the device, resulting in a reload and a DoS condition.
Note: This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv1 or SNMPv2c, the attacker must have a valid read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker with administrative privileges to perform command injection attacks on an affected system and elevate privileges to root.
This vulnerability is due to insufficient input validation of command arguments supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of the affected device with root-level privileges. |
| A vulnerability in the Object Model CLI component of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, local attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have valid user credentials and any role that includes CLI access.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by issuing crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the API of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to overwrite arbitrary files on the local file system. To exploit this vulnerability, the attacker must have valid read-only credentials with API access on the affected system.
This vulnerability is due to improper file handling on the API interface of an affected system. An attacker could exploit this vulnerability by uploading a malicious file on the local file system. A successful exploit could allow the attacker to overwrite arbitrary files on the affected system and gain vmanage user privileges. |
| A vulnerability in the Data Collection Agent (DCA) feature of Cisco Catalyst SD-WAN Manager could allow an authenticated, local attacker to gain DCA user privileges on an affected system. To exploit this vulnerability, the attacker must have valid vmanage credentials on the affected system.
This vulnerability is due to the presence of a credential file for the DCA user on an affected system. An attacker could exploit this vulnerability by accessing the filesystem as a low-privileged user and reading the file that contains the DCA password from that affected system. A successful exploit could allow the attacker to access another affected system and gain DCA user privileges.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| A vulnerability in the API user authentication of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain access to an affected system as a user who has the netadmin role.
The vulnerability is due to improper authentication for requests that are sent to the API. An attacker could exploit this vulnerability by sending a crafted request to the API of an affected system. A successful exploit could allow the attacker to execute commands with the privileges of the netadmin role.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root.
The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device.
Please note that this service is enabled by default as no specific configuration is required.
This issue affects Junos OS Evolved on PTX Series:
* 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 25.4R1-EVO.
This issue does not affect Junos OS. |
| VMware Aria Operations contains a stored cross-site scripting vulnerability. A malicious actor with privileges to create custom benchmarks may be able to inject script to perform administrative actions in VMware Aria Operations.
To remediate CVE-2026-22720, apply the patches listed in the 'Fixed Version' column of the 'Response Matrix' of VMSA-2026-0001 https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947https:// . |
| Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public exponents (e=3). Two ENS-supported TLDs (.cc and .name) use e=3 for their Key Signing Keys, allowing any domain under these TLDs to be fraudulently claimed on ENS without DNS ownership. Apatch was merged at commit c76c5ad0dc9de1c966443bd946fafc6351f87587. Possible workarounds include deploying the patched contracts and pointing DNSSECImpl.setAlgorithm to the deployed contract. |
| Bitnami Sealed Secrets is vulnerable to a scope-widening attack during
the secret rotation (/v1/rotate) flow. The rotation handler derives the
sealing scope for the newly encrypted output from untrusted
spec.template.metadata.annotations present in the input SealedSecret.
By submitting a victim SealedSecret to the rotate endpoint with the
annotation sealedsecrets.bitnami.com/cluster-wide=true injected into the
template metadata, a remote attacker can obtain a rotated version of the
secret that is cluster-wide. This bypasses original "strict" or
"namespace-wide" constraints, allowing the attacker to retarget and unseal
the secret in any namespace or under any name to recover the plaintext
credentials. |
