| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
On an (old) x86 system with SRAT just covering space above 4Gb:
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug
the commit referenced below leads to this NUMA configuration no longer
being refused by a CONFIG_NUMA=y kernel (previously
NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
was seen in the log directly after the message quoted above), because of
memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This
in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES
triggering, followed by a NULL deref in memmap_init() when trying to
access node 64's (NODE_SHIFT=6) node data.
To compensate said change, make memblock_set_node() warn on and adjust
a passed in value of MAX_NUMNODES, just like various other functions
already do. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: seville: register the mdiobus under devres
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Seville VSC9959 switch is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the seville switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The seville driver has a code structure that could accommodate both the
mdiobus_unregister and mdiobus_free calls, but it has an external
dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls
devm_mdiobus_alloc_size() on its behalf. So rather than restructuring
that, and exporting yet one more symbol mscc_miim_teardown(), let's work
with devres and replace of_mdiobus_register with the devres variant.
When we use all-devres, we can ensure that devres doesn't free a
still-registered bus (it either runs both callbacks, or none). |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: felix: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: lantiq_gswip: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path
ip[6]mr_free_table() can only be called under RTNL lock.
RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4
R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000
FS: 00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
ops_init+0xaf/0x470 net/core/net_namespace.c:140
setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
copy_process+0x2e0c/0x7300 kernel/fork.c:2167
kernel_clone+0xe7/0xab0 kernel/fork.c:2555
__do_sys_clone+0xc8/0x110 kernel/fork.c:2672
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038
RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059
RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000
RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300
R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.
In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8. If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows. And this is common
when user space tries to read the entire EEPROM at once.
To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc: task_mmu.c: don't read mapcount for migration entry
The syzbot reported the below BUG:
kernel BUG at include/linux/page-flags.h:785!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
Call Trace:
page_mapcount include/linux/mm.h:837 [inline]
smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
walk_pmd_range mm/pagewalk.c:128 [inline]
walk_pud_range mm/pagewalk.c:205 [inline]
walk_p4d_range mm/pagewalk.c:240 [inline]
walk_pgd_range mm/pagewalk.c:277 [inline]
__walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
walk_page_vma+0x277/0x350 mm/pagewalk.c:530
smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
smap_gather_stats fs/proc/task_mmu.c:741 [inline]
show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
seq_read+0x3e0/0x5b0 fs/seq_file.c:162
vfs_read+0x1b5/0x600 fs/read_write.c:479
ksys_read+0x12d/0x250 fs/read_write.c:619
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time. MADV_FREE may split THPs if it is called
for partial THP. It may trigger the below race:
CPU A CPU B
----- -----
smaps walk: MADV_FREE:
page_mapcount()
PageCompound()
split_huge_page()
page = compound_head(page)
PageDoubleMap(page)
When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.
This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.
Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount(). Don't skip getting mapcount
for device private entries since they do track references with mapcount.
Pagemap also has the similar issue although it was not reported. Fixed
it as well.
[shy828301@gmail.com: v4]
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()] |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix list corruption in perf_cgroup_switch()
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: verify the driver availability for path_event call
If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: don't try to NUMA-migrate COW pages that have other uses
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
While transmitting with rx_len == 0, the RX FIFO is not going to be
emptied in the interrupt handler. A subsequent transfer could then
read crap from the previous transfer out of the RX FIFO into the
start RX buffer. The core provides a register that will empty the RX and
TX FIFOs, so do that before each transfer. |
| In HDP Server versions below 4.6.2.2978 on Linux, unauthorized access could occur via IP spoofing using the X-Forwarded-For header.
Since XFF is a client-controlled header, it could be spoofed, allowing unauthorized access if the spoofed IP matched a whitelisted range.
This vulnerability could be exploited to bypass IP restrictions, though valid user credentials would still be required for resource access. |
| Unauthorized access and impersonation can occur in versions 4.6.2.3226 and below of Progress Software's Hybrid Data Pipeline Server on Linux. This vulnerability allows attackers to combine credentials from different sources, potentially leading to client impersonation and unauthorized access.
When OAuth Clients perform an OAuth handshake with the Hybrid Data Pipeline Server, the server accepts client credentials from both HTTP headers and request parameters. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Iron Mountain Archiving Services Inc. EnVision allows Command Injection.This issue affects enVision: before 250563. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
If migration succeeded, we called
folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the
old to the new folio. This will set memcg_data of the old folio to 0.
Similarly, if migration failed, memcg_data of the dst folio is left unset.
If we call folio_putback_lru() on such folios (memcg_data == 0), we will
add the folio to be freed to the LRU, making memcg code unhappy. Running
the hmm selftests:
# ./hmm-tests
...
# RUN hmm.hmm_device_private.migrate ...
[ 102.078007][T14893] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff27d200 pfn:0x13cc00
[ 102.079974][T14893] anon flags: 0x17ff00000020018(uptodate|dirty|swapbacked|node=0|zone=2|lastcpupid=0x7ff)
[ 102.082037][T14893] raw: 017ff00000020018 dead000000000100 dead000000000122 ffff8881353896c9
[ 102.083687][T14893] raw: 00000007ff27d200 0000000000000000 00000001ffffffff 0000000000000000
[ 102.085331][T14893] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 102.087230][T14893] ------------[ cut here ]------------
[ 102.088279][T14893] WARNING: CPU: 0 PID: 14893 at ./include/linux/memcontrol.h:726 folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.090478][T14893] Modules linked in:
[ 102.091244][T14893] CPU: 0 UID: 0 PID: 14893 Comm: hmm-tests Not tainted 6.13.0-09623-g6c216bc522fd #151
[ 102.093089][T14893] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
[ 102.094848][T14893] RIP: 0010:folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.096104][T14893] Code: ...
[ 102.099908][T14893] RSP: 0018:ffffc900236c37b0 EFLAGS: 00010293
[ 102.101152][T14893] RAX: 0000000000000000 RBX: ffffea0004f30000 RCX: ffffffff8183f426
[ 102.102684][T14893] RDX: ffff8881063cb880 RSI: ffffffff81b8117f RDI: ffff8881063cb880
[ 102.104227][T14893] RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
[ 102.105757][T14893] R10: 0000000000000001 R11: 0000000000000002 R12: ffffc900236c37d8
[ 102.107296][T14893] R13: ffff888277a2bcb0 R14: 000000000000001f R15: 0000000000000000
[ 102.108830][T14893] FS: 00007ff27dbdd740(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
[ 102.110643][T14893] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.111924][T14893] CR2: 00007ff27d400000 CR3: 000000010866e000 CR4: 0000000000750ef0
[ 102.113478][T14893] PKRU: 55555554
[ 102.114172][T14893] Call Trace:
[ 102.114805][T14893] <TASK>
[ 102.115397][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.116547][T14893] ? __warn.cold+0x110/0x210
[ 102.117461][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.118667][T14893] ? report_bug+0x1b9/0x320
[ 102.119571][T14893] ? handle_bug+0x54/0x90
[ 102.120494][T14893] ? exc_invalid_op+0x17/0x50
[ 102.121433][T14893] ? asm_exc_invalid_op+0x1a/0x20
[ 102.122435][T14893] ? __wake_up_klogd.part.0+0x76/0xd0
[ 102.123506][T14893] ? dump_page+0x4f/0x60
[ 102.124352][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.125500][T14893] folio_batch_move_lru+0xd4/0x200
[ 102.126577][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.127505][T14893] __folio_batch_add_and_move+0x391/0x720
[ 102.128633][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.129550][T14893] folio_putback_lru+0x16/0x80
[ 102.130564][T14893] migrate_device_finalize+0x9b/0x530
[ 102.131640][T14893] dmirror_migrate_to_device.constprop.0+0x7c5/0xad0
[ 102.133047][T14893] dmirror_fops_unlocked_ioctl+0x89b/0xc80
Likely, nothing else goes wrong: putting the last folio reference will
remove the folio from the LRU again. So besides memcg complaining, adding
the folio to be freed to the LRU is just an unnecessary step.
The new flow resembles what we have in migrate_folio_move(): add the dst
to the lru, rem
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence: Fix out-of-bounds array access in cdns_mrvl_xspi_setup_clock()
If requested_clk > 128, cdns_mrvl_xspi_setup_clock() iterates over the
entire cdns_mrvl_xspi_clk_div_list array without breaking out early,
causing 'i' to go beyond the array bounds.
Fix that by stopping the loop when it gets to the last entry, clamping
the clock to the minimum 6.25 MHz.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: cdns_mrvl_xspi_setup_clock: unexpected end of section .text.cdns_mrvl_xspi_setup_clock |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix possible crash when setting up bsg fails
If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value.
Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)"
will not be satisfied, preventing execution from entering
bsg_remove_queue(), which could lead to the following crash:
BUG: kernel NULL pointer dereference, address: 000000000000041c
Call Trace:
<TASK>
mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr]
mpi3mr_remove+0x6f/0x340 [mpi3mr]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19d/0x220
unbind_store+0xa4/0xb0
kernfs_fop_write_iter+0x11f/0x200
vfs_write+0x1fc/0x3e0
ksys_write+0x67/0xe0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x78/0xe2 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-dai: Ensure DAI widget is valid during params
Each cpu DAI should associate with a widget. However, the topology might
not create the right number of DAI widgets for aggregated amps. And it
will cause NULL pointer deference.
Check that the DAI widget associated with the CPU DAI is valid to prevent
NULL pointer deference due to missing DAI widgets in topologies with
aggregated amps. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
If platform_get_resource_byname() fails and returns NULL because DT lacks
an 'mmio' property for the MHI endpoint, dereferencing res->start will
cause a NULL pointer access. Add a check to prevent it.
[kwilczynski: error message update per the review feedback]
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift
When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of
CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test
and trigger a WARN_ON:
WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646
Call trace:
arm_smmu_init_one_queue+0x15c/0x210
tegra241_cmdqv_init_structures+0x114/0x338
arm_smmu_device_probe+0xb48/0x1d90
Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does. |
