| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem, swap: fix softlockup with mTHP swapin
Following softlockup can be easily reproduced on my test machine with:
echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled
swapon /dev/zram0 # zram0 is a 48G swap device
mkdir -p /sys/fs/cgroup/memory/test
echo 1G > /sys/fs/cgroup/test/memory.max
echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs
while true; do
dd if=/dev/zero of=/tmp/test.img bs=1M count=5120
cat /tmp/test.img > /dev/null
rm /tmp/test.img
done
Then after a while:
watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787]
Modules linked in: zram virtiofs
CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)ยท
Tainted: [L]=SOFTLOCKUP
Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
RIP: 0010:mpol_shared_policy_lookup+0xd/0x70
Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8
RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202
RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001
RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518
RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000
FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
shmem_alloc_folio+0x31/0xc0
shmem_swapin_folio+0x309/0xcf0
? filemap_get_entry+0x117/0x1e0
? xas_load+0xd/0xb0
? filemap_get_entry+0x101/0x1e0
shmem_get_folio_gfp+0x2ed/0x5b0
shmem_file_read_iter+0x7f/0x2e0
vfs_read+0x252/0x330
ksys_read+0x68/0xf0
do_syscall_64+0x4c/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f03f9a46991
Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991
RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003
RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000
</TASK>
The reason is simple, readahead brought some order 0 folio in swap cache,
and the swapin mTHP folio being allocated is in conflict with it, so
swapcache_prepare fails and causes shmem_swap_alloc_folio to return
-EEXIST, and shmem simply retries again and again causing this loop.
Fix it by applying a similar fix for anon mTHP swapin.
The performance change is very slight, time of swapin 10g zero folios
with shmem (test for 12 times):
Before: 2.47s
After: 2.48s
[kasong@tencent.com: add comment] |
| A vulnerability in the RADIUS setting Reject RADIUS requests from clients with repeated failures on Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause Cisco ISE to restart unexpectedly.
This vulnerability is due to a logic error when processing a RADIUS access request for a MAC address that is already a rejected endpoint. An attacker could exploit this vulnerability by sending a specific sequence of multiple crafted RADIUS access request messages to Cisco ISE. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when Cisco ISE restarts. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in CRM Perks WP Gravity Forms Zoho CRM and Bigin gf-zoho allows Phishing.This issue affects WP Gravity Forms Zoho CRM and Bigin: from n/a through <= 1.2.8. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
plfxlc_mac_release() asserts that mac->lock is held. This assertion is
incorrect, because even if it was possible, it would not be the valid
behaviour. The function is used when probe fails or after the device is
disconnected. In both cases mac->lock can not be held as the driver is
not working with the device at the moment. All functions that use mac->lock
unlock it just after it was held. There is also no need to hold mac->lock
for plfxlc_mac_release() itself, as mac data is not affected, except for
mac->flags, which is modified atomically.
This bug leads to the following warning:
================================================================
WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
<TASK>
probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
hub_port_connect drivers/usb/core/hub.c:5477 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
port_event drivers/usb/core/hub.c:5773 [inline]
hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
kthread+0x28d/0x320 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| An improper isolation or compartmentalization vulnerability [CWE-653] in FortiClientMac version 7.4.2 and below, version 7.2.8 and below, 7.0 all versions and FortiVoiceUCDesktop 3.0 all versions desktop application may allow an authenticated attacker to inject code via Electron environment variables. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv:uprobe fix SR_SPIE set/clear handling
In riscv the process of uprobe going to clear spie before exec
the origin insn,and set spie after that.But When access the page
which origin insn has been placed a page fault may happen and
irq was disabled in arch_uprobe_pre_xol function,It cause a WARN
as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol.
We can just remove it.
[ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[ 31.684929] preempt_count: 0, expected: 0
[ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[ 31.686542] Hardware name: riscv-virtio,qemu (DT)
[ 31.686797] Call Trace:
[ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc |
| GFI MailEssentials prior to version 21.8 is vulnerable to an XML External Entity (XXE) issue. An authenticated and remote attacker can send crafted HTTP requests to read arbitrary system files. |
| IBM OpenPages 9.0 and 9.1 is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. This could allow an attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: fix deadlock and link starvation in outgoing data path
The current implementation queues up new control and user packets as needed
and processes this queue down to the ldisc in the same code path.
That means that the upper and the lower layer are hard coupled in the code.
Due to this deadlocks can happen as seen below while transmitting data,
especially during ldisc congestion. Furthermore, the data channels starve
the control channel on high transmission load on the ldisc.
Introduce an additional control channel data queue to prevent timeouts and
link hangups during ldisc congestion. This is being processed before the
user channel data queue in gsm_data_kick(), i.e. with the highest priority.
Put the queue to ldisc data path into a workqueue and trigger it whenever
new data has been put into the transmission queue. Change
gsm_dlci_data_sweep() accordingly to fill up the transmission queue until
TX_THRESH_HI. This solves the locking issue, keeps latency low and provides
good performance on high data load.
Note that now all packets from a DLCI are removed from the internal queue
if the associated DLCI was closed. This ensures that no data is sent by the
introduced write task to an already closed DLCI.
BUG: spinlock recursion on CPU#0, test_v24_loop/124
lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0
CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
do_raw_spin_lock+0x76/0xa0
_raw_spin_lock_irqsave+0x72/0x80
uart_write_room+0x3b/0xc0
gsm_data_kick+0x14b/0x240 [n_gsm]
gsmld_write_wakeup+0x35/0x70 [n_gsm]
tty_wakeup+0x53/0x60
tty_port_default_wakeup+0x1b/0x30
serial8250_tx_chars+0x12f/0x220
serial8250_handle_irq.part.0+0xfe/0x150
serial8250_default_handle_irq+0x48/0x80
serial8250_interrupt+0x56/0xa0
__handle_irq_event_percpu+0x78/0x1f0
handle_irq_event+0x34/0x70
handle_fasteoi_irq+0x90/0x1e0
__common_interrupt+0x69/0x100
common_interrupt+0x48/0xc0
asm_common_interrupt+0x1e/0x40
RIP: 0010:__do_softirq+0x83/0x34e
Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d
e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61
80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00
RSP: 0018:ffffc90000003f98 EFLAGS: 00000286
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7
RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000
? __do_softirq+0x73/0x34e
irq_exit_rcu+0xb5/0x100
common_interrupt+0xa4/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x1e/0x40
RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50
Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff
48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff
65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44
RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001
RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8
? _raw_spin_unlock_irqrestore+0x23/0x50
gsmtty_write+0x65/0x80 [n_gsm]
n_tty_write+0x33f/0x530
? swake_up_all+0xe0/0xe0
file_tty_write.constprop.0+0x1b1/0x320
? n_tty_flush_buffer+0xb0/0xb0
new_sync_write+0x10c/0x190
vfs_write+0x282/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f3e5e35c15c
Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable
commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear
pending PMI before resetting an overflown PMC") added a new
function "pmi_irq_pending" in hw_irq.h. This function is to check
if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is
used in power_pmu_disable in a WARN_ON. The intention here is to
provide a warning if there is PMI pending, but no counter is found
overflown.
During some of the perf runs, below warning is hit:
WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0
Modules linked in:
-----
NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0
LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0
Call Trace:
[c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable)
[c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60
[c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100
[c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240
[c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140
[c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0
[c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300
[c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100
[c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40
[c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250
[c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0
[c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0
[c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80
[c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0
[c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140
[c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8
[c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0
[c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220
This means that there is no PMC overflown among the active events
in the PMU, but there is a PMU pending in Paca. The function
"any_pmc_overflown" checks the PMCs on active events in
cpuhw->n_events. Code snippet:
<<>>
if (any_pmc_overflown(cpuhw))
clear_pmi_irq_pending();
else
WARN_ON(pmi_irq_pending());
<<>>
Here the PMC overflown is not from active event. Example: When we do
perf record, default cycles and instructions will be running on PMC6
and PMC5 respectively. It could happen that overflowed event is currently
not active and pending PMI is for the inactive event. Debug logs from
trace_printk:
<<>>
any_pmc_overflown: idx is 5: pmc value is 0xd9a
power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011
<<>>
Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011).
When we handle PMI interrupt for such cases, if the PMC overflown is
from inactive event, it will be ignored. Reference commit:
commit bc09c219b2e6 ("powerpc/perf: Fix finding overflowed PMC in interrupt")
Patch addresses two changes:
1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); )
We were printing warning if no PMC is found overflown among active PMU
events, but PMI pending in PACA. But this could happen in cases where
PMC overflown is not in active PMC. An inactive event could have caused
the overflow. Hence the warning is not needed. To know pending PMI is
from an inactive event, we need to loop through all PMC's which will
cause more SPR reads via mfspr and increase in context switch. Also in
existing function: perf_event_interrupt, already we ignore PMI's
overflown when it is from an inactive PMC.
2) Fix 2: optimization in clearing pending PMI.
Currently we check for any active PMC overflown before clearing PMI
pending in Paca. This is causing additional SP
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
Following process will fail assertion 'jh->b_frozen_data == NULL' in
jbd2_journal_dirty_metadata():
jbd2_journal_commit_transaction
unlink(dir/a)
jh->b_transaction = trans1
jh->b_jlist = BJ_Metadata
journal->j_running_transaction = NULL
trans1->t_state = T_COMMIT
unlink(dir/b)
handle->h_trans = trans2
do_get_write_access
jh->b_modified = 0
jh->b_frozen_data = frozen_buffer
jh->b_next_transaction = trans2
jbd2_journal_dirty_metadata
is_handle_aborted
is_journal_aborted // return false
--> jbd2 abort <--
while (commit_transaction->t_buffers)
if (is_journal_aborted)
jbd2_journal_refile_buffer
__jbd2_journal_refile_buffer
WRITE_ONCE(jh->b_transaction,
jh->b_next_transaction)
WRITE_ONCE(jh->b_next_transaction, NULL)
__jbd2_journal_file_buffer(jh, BJ_Reserved)
J_ASSERT_JH(jh, jh->b_frozen_data == NULL) // assertion failure !
The reproducer (See detail in [Link]) reports:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:1629!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 584 Comm: unlink Tainted: G W
5.19.0-rc6-00115-g4a57a8400075-dirty #697
RIP: 0010:jbd2_journal_dirty_metadata+0x3c5/0x470
RSP: 0018:ffffc90000be7ce0 EFLAGS: 00010202
Call Trace:
<TASK>
__ext4_handle_dirty_metadata+0xa0/0x290
ext4_handle_dirty_dirblock+0x10c/0x1d0
ext4_delete_entry+0x104/0x200
__ext4_unlink+0x22b/0x360
ext4_unlink+0x275/0x390
vfs_unlink+0x20b/0x4c0
do_unlinkat+0x42f/0x4c0
__x64_sys_unlink+0x37/0x50
do_syscall_64+0x35/0x80
After journal aborting, __jbd2_journal_refile_buffer() is executed with
holding @jh->b_state_lock, we can fix it by moving 'is_handle_aborted()'
into the area protected by @jh->b_state_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix recursived rtnl_lock() during probe()
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix bug due to prealloc collision
When userspace is using AF_RXRPC to provide a server, it has to preallocate
incoming calls and assign to them call IDs that will be used to thread
related recvmsg() and sendmsg() together. The preallocated call IDs will
automatically be attached to calls as they come in until the pool is empty.
To the kernel, the call IDs are just arbitrary numbers, but userspace can
use the call ID to hold a pointer to prepared structs. In any case, the
user isn't permitted to create two calls with the same call ID (call IDs
become available again when the call ends) and EBADSLT should result from
sendmsg() if an attempt is made to preallocate a call with an in-use call
ID.
However, the cleanup in the error handling will trigger both assertions in
rxrpc_cleanup_call() because the call isn't marked complete and isn't
marked as having been released.
Fix this by setting the call state in rxrpc_service_prealloc_one() and then
marking it as being released before calling the cleanup function. |
| The Post Type Switcher plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 4.0.0 due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Author-level access and above, to modify the post type of arbitrary posts and pages they do not own, including those created by administrators, which can lead to site disruption, broken navigation, and SEO impact. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: avoid kernel BUG for encrypted inode with unaligned file size
The generic/397 test hits a BUG_ON for the case of encrypted inode with
unaligned file size (for example, 33K or 1K):
[ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40
[ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established
[ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established
[ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2.
[ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.374578] -----------[ cut here ]------------
[ 878.374586] kernel BUG at net/ceph/messenger.c:1070!
[ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1
[ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 878.380167] Workqueue: ceph-msgr ceph_con_workfn
[ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50
[ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90
[ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287
[ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000
[ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378
[ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000
[ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030
[ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001
[ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000
[ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0
[ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 878.391307] PKRU: 55555554
[ 878.391567] Call Trace:
[ 878.391807] <TASK>
[ 878.392021] ? show_regs+0x71/0x90
[ 878.392391] ? die+0x38/0xa0
[ 878.392667] ? do_trap+0xdb/0x100
[ 878.392981] ? do_error_trap+0x75/0xb0
[ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50
[ 878.393842] ? exc_invalid_op+0x53/0x80
[ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50
[ 878.394694] ? asm_exc_invalid_op+0x1b/0x20
[ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50
[ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220
[ 878.396027] ? _raw_spin_unlock+0xe/0x40
[ 878.396428] ? raw_spin_rq_unlock+0x10/0x40
[ 878.396842] ? finish_task_switch.isra.0+0x97/0x310
[ 878.397338] ? __schedule+0x44b/0x16b0
[ 878.397738] ceph_con_workfn+0x326/0x750
[ 878.398121] process_one_work+0x188/0x3d0
[ 878.398522] ? __pfx_worker_thread+0x10/0x10
[ 878.398929] worker_thread+0x2b5/0x3c0
[ 878.399310] ? __pfx_worker_thread+0x10/0x10
[ 878.399727] kthread+0xe1/0x120
[ 878.400031] ? __pfx_kthread+0x10/0x10
[ 878.400431] ret_from_fork+0x43/0x70
[ 878.400771] ? __pfx_kthread+0x10/0x10
[ 878.401127] ret_from_fork_asm+0x1a/0x30
[ 878.401543] </TASK>
[ 878.401760] Modules l
---truncated--- |
| A weakness has been identified in bestfeng oa_git_free up to 9.5. This affects the function updateWriteBack of the file yimioa-oa9.5\server\c-flow\src\main\java\com\cloudweb\oa\controller\WorkflowPredefineController.java. This manipulation of the argument writeProp causes xml external entity reference. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be exploited. |
| In a Bluetooth device, using RS9116-WiseConnect SDK experiences a Denial of Service, if it receives malformed L2CAP packets, only hard reset will bring the device to normal operation |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: get rid of the crit lock
Get rid of the crit lock.
That frees us from the error prone logic of try_locks.
Thanks to netdev_lock() by Jakub it is now easy, and in most cases we were
protected by it already - replace crit lock by netdev lock when it was not
the case.
Lockdep reports that we should cancel the work under crit_lock [splat1],
and that was the scheme we have mostly followed since [1] by Slawomir.
But when that is done we still got into deadlocks [splat2]. So instead
we should look at the bigger problem, namely "weird locking/scheduling"
of the iavf. The first step to fix that is to remove the crit lock.
I will followup with a -next series that simplifies scheduling/tasks.
Cancel the work without netdev lock (weird unlock+lock scheme),
to fix the [splat2] (which would be totally ugly if we would kept
the crit lock).
Extend protected part of iavf_watchdog_task() to include scheduling
more work.
Note that the removed comment in iavf_reset_task() was misplaced,
it belonged to inside of the removed if condition, so it's gone now.
[splat1] - w/o this patch - The deadlock during VF removal:
WARNING: possible circular locking dependency detected
sh/3825 is trying to acquire lock:
((work_completion)(&(&adapter->watchdog_task)->work)){+.+.}-{0:0}, at: start_flush_work+0x1a1/0x470
but task is already holding lock:
(&adapter->crit_lock){+.+.}-{4:4}, at: iavf_remove+0xd1/0x690 [iavf]
which lock already depends on the new lock.
[splat2] - when cancelling work under crit lock, w/o this series,
see [2] for the band aid attempt
WARNING: possible circular locking dependency detected
sh/3550 is trying to acquire lock:
((wq_completion)iavf){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
(&dev->lock){+.+.}-{4:4}, at: iavf_remove+0xa6/0x6e0 [iavf]
which lock already depends on the new lock.
[1] fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation")
[2] https://github.com/pkitszel/linux/commit/52dddbfc2bb60294083f5711a158a |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: Check dsbr size from EFI variable
Since the size of struct btintel_dsbr is already known, we can just
start there instead of querying the EFI variable size. If the final
result doesn't match what we expect also fail. This fixes a stack buffer
overflow when the EFI variable is larger than struct btintel_dsbr. |
