| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Restund is an open source NAT traversal server. The restund TURN server can be instructed to open a relay to the loopback address range. This allows you to reach any other service running on localhost which you might consider private. In the configuration that we ship (https://github.com/wireapp/ansible-restund/blob/master/templates/restund.conf.j2#L40-L43) the `status` interface of restund is enabled and is listening on `127.0.0.1`.The `status` interface allows users to issue administrative commands to `restund` like listing open relays or draining connections. It would be possible for an attacker to contact the status interface and issue administrative commands by setting `XOR-PEER-ADDRESS` to `127.0.0.1:{{restund_udp_status_port}}` when opening a TURN channel. We now explicitly disallow relaying to loopback addresses, 'any' addresses, link local addresses, and the broadcast address. As a workaround disable the `status` module in your restund configuration. However there might still be other services running on `127.0.0.0/8` that you do not want to have exposed. The `turn` module can be disabled. Restund will still perform STUN and this might already be enough for initiating calls in your environments. TURN is only used as a last resort when other NAT traversal options do not work. One should also make sure that the TURN server is set up with firewall rules so that it cannot relay to other addresses that you don't want the TURN server to relay to. For example other services in the same VPC where the TURN server is running. Ideally TURN servers should be deployed in an isolated fashion where they can only reach what they need to reach to perform their task of assisting NAT-traversal. |
| Switchboard Bluetooth Plug for elementary OS from version 2.3.0 and before version version 2.3.5 has an incorrect authorization vulnerability. When the Bluetooth plug is running (in discoverable mode), Bluetooth service requests and pairing requests are automatically accepted, allowing physically proximate attackers to pair with a device running an affected version of switchboard-plug-bluetooth without the active consent of the user. By default, elementary OS doesn't expose any services via Bluetooth that allow information to be extracted by paired Bluetooth devices. However, if such services (i.e. contact list sharing software) have been installed, it's possible that attackers have been able to extract data from such services without authorization. If no such services have been installed, attackers are only able to pair with a device running an affected version without authorization and then play audio out of the device or possibly present a HID device (keyboard, mouse, etc...) to control the device. As such, users should check the list of trusted/paired devices and remove any that are not 100% confirmed to be genuine. This is fixed in version 2.3.5. To reduce the likelihood of this vulnerability on an unpatched version, only open the Bluetooth plug for short intervals when absolutely necessary and preferably not in crowded public areas. To mitigate the risk entirely with unpatched versions, do not open the Bluetooth plug within switchboard at all, and use a different method for pairing devices if necessary (e.g. `bluetoothctl` CLI). |
| MinIO is an open-source high performance object storage service and it is API compatible with Amazon S3 cloud storage service. In MinIO before version RELEASE.2021-03-04T00-53-13Z it is possible to bypass a readOnly policy by creating a temporary 'mc share upload' URL. Everyone is impacted who uses MinIO multi-users. This is fixed in version RELEASE.2021-03-04T00-53-13Z. As a workaround, one can disable uploads with `Content-Type: multipart/form-data` as mentioned in the S3 API RESTObjectPOST docs by using a proxy in front of MinIO. |
| GLPI is an open-source asset and IT management software package that provides ITIL Service Desk features, licenses tracking and software auditing. In GLPI before version 9.5.4 non-authenticated user can remotely instantiate object of any class existing in the GLPI environment that can be used to carry out malicious attacks, or to start a “POP chain”. As an example of direct impact, this vulnerability affects integrity of the GLPI core platform and third-party plugins runtime misusing classes which implement some sensitive operations in their constructors or destructors. This is fixed in version 9.5.4. |
| GLPI is an open-source asset and IT management software package that provides ITIL Service Desk features, licenses tracking and software auditing. In GLPI before version 9.5.4 it is possible to create tickets for another user with self-service interface without delegatee systems enabled. This is fixed in version 9.5.4. |
| Opencast is a free, open-source platform to support the management of educational audio and video content. In Opencast before version 9.2 there is a vulnerability in which publishing an episode with strict access rules will overwrite the currently set series access. This allows for an easy denial of access for all users without superuser privileges, effectively hiding the series. Access to series and series metadata on the search service (shown in media module and player) depends on the events published which are part of the series. Publishing an event will automatically publish a series and update access to it. Removing an event or republishing the event should do the same. Affected versions of Opencast may not update the series access or remove a published series if an event is being removed. On removal of an episode, this may lead to an access control list for series metadata with broader access rules than the merged access rules of all remaining events, or the series metadata still being available although all episodes of that series have been removed. This problem is fixed in Opencast 9.2. |
| Lucee Server is a dynamic, Java based (JSR-223), tag and scripting language used for rapid web application development. In Lucee Admin before versions 5.3.7.47, 5.3.6.68 or 5.3.5.96 there is an unauthenticated remote code exploit. This is fixed in versions 5.3.7.47, 5.3.6.68 or 5.3.5.96. As a workaround, one can block access to the Lucee Administrator. |
| AVideo Platform is an open-source Audio and Video platform. It is similar to a self-hosted YouTube. In AVideo Platform before version 10.2 there is an authorization bypass vulnerability which enables an ordinary user to get admin control. This is fixed in version 10.2. All queries now remove the pass hash and the recoverPass hash. |
| Polr is an open source URL shortener. in Polr before version 2.3.0, a vulnerability in the setup process allows attackers to gain admin access to site instances, even if they do not possess an existing account. This vulnerability exists regardless of users' settings. If an attacker crafts a request with specific cookie headers to the /setup/finish endpoint, they may be able to obtain admin privileges on the instance. This is caused by a loose comparison (==) in SetupController that is susceptible to attack. The project has been patched to ensure that a strict comparison (===) is used to verify the setup key, and that /setup/finish verifies that no users table exists before performing any migrations or provisioning any new accounts. This is fixed in version 2.3.0. Users can patch this vulnerability without upgrading by adding abort(404) to the very first line of finishSetup in SetupController.php. |
| October is a free, open-source, self-hosted CMS platform based on the Laravel PHP Framework. A bypass of CVE-2020-26231 (fixed in 1.0.470/471 and 1.1.1) was discovered that has the same impact as CVE-2020-26231 & CVE-2020-15247. An authenticated backend user with the `cms.manage_pages`, `cms.manage_layouts`, or `cms.manage_partials` permissions who would **normally** not be permitted to provide PHP code to be executed by the CMS due to `cms.enableSafeMode` being enabled is able to write specific Twig code to escape the Twig sandbox and execute arbitrary PHP. This is not a problem for anyone that trusts their users with those permissions to normally write & manage PHP within the CMS by not having `cms.enableSafeMode` enabled, but would be a problem for anyone relying on `cms.enableSafeMode` to ensure that users with those permissions in production do not have access to write & execute arbitrary PHP. Issue has been patched in Build 472 (v1.0.472) and v1.1.2. As a workaround, apply https://github.com/octobercms/october/commit/f63519ff1e8d375df30deba63156a2fc97aa9ee7 to your installation manually if unable to upgrade to Build 472 or v1.1.2. |
| GLPI is an open-source asset and IT management software package that provides ITIL Service Desk features, licenses tracking and software auditing. In GLPI version 9.5.3, it was possible to switch entities with IDOR from a logged in user. This is fixed in version 9.5.4. |
| OneDev is an all-in-one devops platform. In OneDev before version 4.0.3, the REST UserResource endpoint performs a security check to make sure that only administrators can list user details. However for the `/users/{id}` endpoint there are no security checks enforced so it is possible to retrieve arbitrary user details including their Access Tokens! These access tokens can be used to access the API or clone code in the build spec via the HTTP(S) protocol. It has permissions to all projects accessible by the user account. This issue may lead to `Sensitive data leak` and leak the Access Token which can be used to impersonate the administrator or any other users. This issue was addressed in 4.0.3 by removing user info from restful api. |
| Insufficient policy enforcement in extensions in Google Chrome prior to 90.0.4430.93 allowed an attacker who convinced a user to install a malicious extension to bypass navigation restrictions via a crafted Chrome Extension. |
| Insufficient policy enforcement in QR scanning in Google Chrome on iOS prior to 89.0.4389.72 allowed an attacker who convinced the user to scan a QR code to bypass navigation restrictions via a crafted QR code. |
| Insufficient policy enforcement in navigations in Google Chrome prior to 89.0.4389.72 allowed a remote attacker who had compromised the renderer process to bypass navigation restrictions via a crafted HTML page. |
| Magento versions 2.4.1 (and earlier), 2.4.0-p1 (and earlier) and 2.3.6 (and earlier) are vulnerable to an insecure direct object vulnerability (IDOR) in the customer API module. Successful exploitation could lead to sensitive information disclosure and update arbitrary information on another user's account. |
| Yappli is an application development platform which provides the function to access a requested URL using Custom URL Scheme. When Android apps are developed with Yappli versions since v7.3.6 and prior to v9.30.0, they are vulnerable to improper authorization in Custom URL Scheme handler, and may be directed to unintended sites via a specially crafted URL. |
| Incorrect authorization vulnerability in KONICA MINOLTA bizhub series (bizhub C750i G00-35 and earlier, bizhub C650i/C550i/C450i G00-B6 and earlier, bizhub C360i/C300i/C250i G00-B6 and earlier, bizhub 750i/650i/550i/450i G00-37 and earlier, bizhub 360i/300i G00-33 and earlier, bizhub C287i/C257i/C227i G00-19 and earlier, bizhub 306i/266i/246i/226i G00-B6 and earlier, bizhub C759/C659 GC7-X8 and earlier, bizhub C658/C558/C458 GC7-X8 and earlier, bizhub 958/808/758 GC7-X8 and earlier, bizhub 658e/558e/458e GC7-X8 and earlier, bizhub C287/C227 GC7-X8 and earlier, bizhub 287/227 GC7-X8 and earlier, bizhub 368e/308e GC7-X8 and earlier, bizhub C368/C308/C258 GC9-X4 and earlier, bizhub 558/458/368/308 GC9-X4 and earlier, bizhub C754e/C654e GDQ-M0 and earlier, bizhub 754e/654e GDQ-M0 and earlier, bizhub C554e/C454e GDQ-M1 and earlier, bizhub C364e/C284e/C224e GDQ-M1 and earlier, bizhub 554e/454e/364e/284e/224e GDQ-M1 and earlier, bizhub C754/C654 C554/C454 GR1-M0 and earlier, bizhub C364/C284/C224 GR1-M0 and earlier, bizhub 754/654 GR1-M0 and earlier, bizhub C4050i/C3350i/C4000i/C3300i G00-B6 and earlier, bizhub C3320i G00-B6 and earlier, bizhub 4750i/4050i G00-22 and earlier, bizhub 4700i G00-22 and earlier, bizhub C3851FS/C3851/C3351 GC9-X4 and earlier, and bizhub 4752/4052 GC9-X4 and earlier) allows an attacker on the adjacent network to obtain user credentials if external server authentication is enabled via a specific SOAP message sent by an administrative user. |
| Advanced Custom Fields versions prior to 5.11 and Advanced Custom Fields Pro versions prior to 5.11 contain a missing authorization vulnerability in moving the field group which may allow a user to move the unauthorized field group via unspecified vectors. |
| Advanced Custom Fields versions prior to 5.11 and Advanced Custom Fields Pro versions prior to 5.11 contain a missing authorization vulnerability in obtaining the user list which may allow a user to obtain the unauthorized information via unspecified vectors. |
