| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) and DPC3941T (firmware version DPC3941_2.5s3_PROD_sey) devices allows remote attackers to access the web UI by establishing a session to the wan0 WAN IPv6 address and then entering unspecified hardcoded credentials. This wan0 interface cannot be accessed from the public Internet. |
| A vulnerability in the Session Initiation Protocol (SIP) on the Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the targeted appliance. The vulnerability is due to excessive SIP traffic sent to the device. An attacker could exploit this vulnerability by transmitting large volumes of SIP traffic to the VCS. An exploit could allow the attacker to cause a complete DoS condition on the targeted system. Cisco Bug IDs: CSCve32897. |
| A vulnerability in the Cisco Unified Intelligence Center web interface could allow an unauthenticated, remote attacker to impact the integrity of the system by executing a Document Object Model (DOM)-based, environment or client-side cross-site scripting (XSS) attack. The vulnerability occurs because user-supplied data in the DOM input is not validated. An attacker could exploit this vulnerability by sending crafted URLs that contain malicious DOM statements to the affected system. A successful exploit could allow the attacker to affect the integrity of the system by manipulating the database. Known Affected Releases 11.0(1)ES10. Cisco Bug IDs: CSCvf18325. |
| A vulnerability in the Trust Verification Service (TVS) of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) traffic by the affected software. An attacker could exploit this vulnerability by generating incomplete traffic streams. A successful exploit could allow the attacker to deny access to the TVS for an affected device, resulting in a DoS condition, until an administrator restarts the service. Known Affected Releases 10.0(1.10000.24) 10.5(2.10000.5) 11.0(1.10000.10) 9.1(2.10000.28). Cisco Bug IDs: CSCux21905. |
| A vulnerability in Cisco Elastic Services Controller could allow an authenticated, local, unprivileged attacker to access sensitive information, including credentials for system accounts, on an affected system. The vulnerability is due to improper protection of sensitive log files. An attacker could exploit this vulnerability by logging in to an affected system and accessing unprotected log files. A successful exploit could allow the attacker to access sensitive log files, which may include system credentials, on the affected system. Cisco Bug IDs: CSCvc76616. Known Affected Releases: 2.2(9.76). |
| A vulnerability in configuration modification permissions validation for Cisco Unified Communications Manager could allow an authenticated, remote attacker to perform a horizontal privilege escalation where one user can modify another user's configuration. The vulnerability is due to lack of proper Role Based Access Control (RBAC) when certain user configuration changes are requested. An attacker could exploit this vulnerability by sending an authenticated, crafted HTTP request to the targeted application. An exploit could allow the attacker to impact the integrity of the application where one user can modify the configuration of another user's information. Cisco Bug IDs: CSCve27331. Known Affected Releases: 10.5(2.10000.5), 11.0(1.10000.10), 11.5(1.10000.6). |
| The WebLaunch functionality of Cisco AnyConnect Secure Mobility Client Software contains a vulnerability that could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the affected software. The vulnerability is due to insufficient input validation of some parameters that are passed to the WebLaunch function of the affected software. An attacker could exploit this vulnerability by convincing a user to access a malicious link or by intercepting a user request and injecting malicious code into the request. Cisco Bug IDs: CSCvf12055. Known Affected Releases: 98.89(40). |
| A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830. |
| A vulnerability in the administrative web interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to modify a page in the web interface of the affected application. The vulnerability is due to improper sanitization of parameter values by the affected application. An attacker could exploit this vulnerability by injecting malicious code into an affected parameter and persuading a user to access a web page that triggers the rendering of the injected code. Cisco Bug IDs: CSCve47074. Known Affected Releases: 3.2(0.0). |
| A vulnerability in the management of shell user accounts for Cisco Policy Suite (CPS) Software for CPS appliances could allow an authenticated, local attacker to gain elevated privileges on an affected system. The affected privilege level is not at the root level. The vulnerability is due to incorrect role-based access control (RBAC) for shell user accounts. An attacker could exploit this vulnerability by authenticating to an affected appliance and providing crafted user input via the CLI. A successful exploit could allow the attacker to acquire a higher privilege level than should have been granted. To exploit this vulnerability, the attacker must log in to the appliance with valid credentials. Cisco Bug IDs: CSCve37724. Known Affected Releases: 9.0.0, 9.1.0, 10.0.0, 11.0.0, 12.0.0. |
| A vulnerability in SNMP polling for the Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to discover confidential information about the appliances that should be available only to an administrative user. The vulnerability occurs because the appliances do not protect confidential information at rest in response to Simple Network Management Protocol (SNMP) poll requests. An attacker could exploit this vulnerability by doing a crafted SNMP poll request to the targeted security appliance. An exploit could allow the attacker to discover confidential information that should be restricted, and the attacker could use this information to conduct additional reconnaissance. The attacker must know the configured SNMP community string to exploit this vulnerability. Cisco Bug IDs: CSCve26106, CSCve26202, CSCve26224. Known Affected Releases: 10.0.0-230 (Web Security Appliance), 9.7.2-065 (Email Security Appliance), and 10.1.0-037 (Content Security Management Appliance). |
| A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164. |
| A vulnerability in the batch provisioning feature in Cisco Prime Collaboration Provisioning Tool could allow an authenticated, remote attacker to overwrite system files as root. The vulnerability is due to lack of input validation of the parameters in BatchFileName and Directory. An attacker could exploit this vulnerability by manipulating the parameters of the batch action file function. Cisco Bug IDs: CSCvd61766. |
| A vulnerability in the web interface of the Cisco RV340, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to Cisco WebEx Meetings not sufficiently protecting sensitive data when responding to an HTTP request to the web interface. An attacker could exploit the vulnerability by attempting to use the HTTP protocol and looking at the data in the HTTP responses from the Cisco WebEx Meetings Server. An exploit could allow the attacker to find sensitive information about the application. Cisco Bug IDs: CSCve37988. Known Affected Releases: firmware 1.0.0.30, 1.0.0.33, 1.0.1.9, 1.0.1.16. |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783. |
| The Comcast firmware on Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST) devices allows configuration changes via CSRF. |
| Cisco IOS 12.0 through 15.6, Adaptive Security Appliance (ASA) Software 7.0.1 through 9.7.1.2, NX-OS 4.0 through 12.0, and IOS XE 3.6 through 3.18 are affected by a vulnerability involving the Open Shortest Path First (OSPF) Routing Protocol Link State Advertisement (LSA) database. This vulnerability could allow an unauthenticated, remote attacker to take full control of the OSPF Autonomous System (AS) domain routing table, allowing the attacker to intercept or black-hole traffic. The attacker could exploit this vulnerability by injecting crafted OSPF packets. Successful exploitation could cause the targeted router to flush its routing table and propagate the crafted OSPF LSA type 1 update throughout the OSPF AS domain. To exploit this vulnerability, an attacker must accurately determine certain parameters within the LSA database on the target router. This vulnerability can only be triggered by sending crafted unicast or multicast OSPF LSA type 1 packets. No other LSA type packets can trigger this vulnerability. OSPFv3 is not affected by this vulnerability. Fabric Shortest Path First (FSPF) protocol is not affected by this vulnerability. Cisco Bug IDs: CSCva74756, CSCve47393, CSCve47401. |
| A vulnerability in the CLI of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, local attacker to elevate their privileges to admin-level privileges. The vulnerability is due to incorrect permissions that are given to a set of users. An attacker could exploit this vulnerability by logging in to the shell of an affected device and elevating their privileges by modifying environment variables. An exploit could allow the attacker to gain admin-level privileges and take control of the affected device. Cisco Bug IDs: CSCvd47741. Known Affected Releases: 21.0.v0.65839. |
| A vulnerability in the AutoVNF automation tool of the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to acquire sensitive information. The vulnerability is due to insufficient protection of sensitive data. An attacker could exploit this vulnerability by browsing to a specific URL of an affected device. An exploit could allow the attacker to view sensitive configuration information about the deployment. Cisco Bug IDs: CSCvd29358. Known Affected Releases: 21.0.v0.65839. |
| A vulnerability in the build procedure for certain executable system files installed at boot time on Cisco Application Policy Infrastructure Controller (APIC) devices could allow an authenticated, local attacker to gain root-level privileges. The vulnerability is due to a custom executable system file that was built to use relative search paths for libraries without properly validating the library to be loaded. An attacker could exploit this vulnerability by authenticating to the device and loading a malicious library that can escalate the privilege level. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. The attacker must have valid user credentials to log in to the device. Cisco Bug IDs: CSCvc96087. Known Affected Releases: 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1). |
