| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: qmi_encdec: Restrict string length in decode
The QMI TLV value for strings in a lot of qmi element info structures
account for null terminated strings with MAX_LEN + 1. If a string is
actually MAX_LEN + 1 length, this will cause an out of bounds access
when the NULL character is appended in decoding. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: move memblock_allow_resize() after linear mapping is ready
The initial memblock metadata is accessed from kernel image mapping. The
regions arrays need to "reallocated" from memblock and accessed through
linear mapping to cover more memblock regions. So the resizing should
not be allowed until linear mapping is ready. Note that there are
memblock allocations when building linear mapping.
This patch is similar to 24cc61d8cb5a ("arm64: memblock: don't permit
memblock resizing until linear mapping is up").
In following log, many memblock regions are reserved before
create_linear_mapping_page_table(). And then it triggered reallocation
of memblock.reserved.regions and memcpy the old array in kernel image
mapping to the new array in linear mapping which caused a page fault.
[ 0.000000] memblock_reserve: [0x00000000bf01f000-0x00000000bf01ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf021000-0x00000000bf021fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf023000-0x00000000bf023fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf025000-0x00000000bf025fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf027000-0x00000000bf027fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf029000-0x00000000bf029fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf02b000-0x00000000bf02bfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf02d000-0x00000000bf02dfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf02f000-0x00000000bf02ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf030000-0x00000000bf030fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000
[ 0.000000] memblock_reserve: [0x00000000bf000000-0x00000000bf001fed] paging_init+0x19a/0x5ae
[ 0.000000] memblock_phys_alloc_range: 4096 bytes align=0x1000 from=0x0000000000000000 max_addr=0x0000000000000000 alloc_pmd_fixmap+0x14/0x1c
[ 0.000000] memblock_reserve: [0x000000017ffff000-0x000000017fffffff] memblock_alloc_range_nid+0xb8/0x128
[ 0.000000] memblock: reserved is doubled to 256 at [0x000000017fffd000-0x000000017fffe7ff]
[ 0.000000] Unable to handle kernel paging request at virtual address ff600000ffffd000
[ 0.000000] Oops [#1]
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.4.0-rc1-00011-g99a670b2069c #66
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] epc : __memcpy+0x60/0xf8
[ 0.000000] ra : memblock_double_array+0x192/0x248
[ 0.000000] epc : ffffffff8081d214 ra : ffffffff80a3dfc0 sp : ffffffff81403bd0
[ 0.000000] gp : ffffffff814fbb38 tp : ffffffff8140dac0 t0 : 0000000001600000
[ 0.000000] t1 : 0000000000000000 t2 : 000000008f001000 s0 : ffffffff81403c60
[ 0.000000] s1 : ffffffff80c0bc98 a0 : ff600000ffffd000 a1 : ffffffff80c0bcd8
[ 0.000000] a2 : 0000000000000c00 a3 : ffffffff80c0c8d8 a4 : 0000000080000000
[ 0.000000] a5 : 0000000000080000 a6 : 0000000000000000 a7 : 0000000080200000
[ 0.000000] s2 : ff600000ffffd000 s3 : 0000000000002000 s4 : 0000000000000c00
[ 0.000000] s5 : ffffffff80c0bc60 s6 : ffffffff80c0bcc8 s7 : 0000000000000000
[ 0.000000] s8 : ffffffff814fd0a8 s9 : 000000017fffe7ff s10: 0000000000000000
[ 0.000000] s11: 0000000000001000 t3 : 0000000000001000 t4 : 0000000000000000
[ 0.000000] t5 : 000000008f003000 t6 : ff600000ffffd000
[ 0.000000] status: 0000000200000100 badaddr: ff600000ffffd000 cause: 000000000000000f
[ 0.000000] [<fff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix for out-of bound access error
Selfgen stats are placed in a buffer using print_array_to_buf_index() function.
Array length parameter passed to the function is too big, resulting in possible
out-of bound memory error.
Decreasing buffer size by one fixes faulty upper bound of passed array.
Discovered in coverity scan, CID 1600742 and CID 1600758 |
| In the Linux kernel, the following vulnerability has been resolved:
nvkm: correctly calculate the available space of the GSP cmdq buffer
r535_gsp_cmdq_push() waits for the available page in the GSP cmdq
buffer when handling a large RPC request. When it sees at least one
available page in the cmdq, it quits the waiting with the amount of
free buffer pages in the queue.
Unfortunately, it always takes the [write pointer, buf_size) as
available buffer pages before rolling back and wrongly calculates the
size of the data should be copied. Thus, it can overwrite the RPC
request that GSP is currently reading, which causes GSP hang due
to corrupted RPC request:
[ 549.209389] ------------[ cut here ]------------
[ 549.214010] WARNING: CPU: 8 PID: 6314 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:116 r535_gsp_msgq_wait+0xd0/0x190 [nvkm]
[ 549.225678] Modules linked in: nvkm(E+) gsp_log(E) snd_seq_dummy(E) snd_hrtimer(E) snd_seq(E) snd_timer(E) snd_seq_device(E) snd(E) soundcore(E) rfkill(E) qrtr(E) vfat(E) fat(E) ipmi_ssif(E) amd_atl(E) intel_rapl_msr(E) intel_rapl_common(E) mlx5_ib(E) amd64_edac(E) edac_mce_amd(E) kvm_amd(E) ib_uverbs(E) kvm(E) ib_core(E) acpi_ipmi(E) ipmi_si(E) mxm_wmi(E) ipmi_devintf(E) rapl(E) i2c_piix4(E) wmi_bmof(E) joydev(E) ptdma(E) acpi_cpufreq(E) k10temp(E) pcspkr(E) ipmi_msghandler(E) xfs(E) libcrc32c(E) ast(E) i2c_algo_bit(E) crct10dif_pclmul(E) drm_shmem_helper(E) nvme_tcp(E) crc32_pclmul(E) ahci(E) drm_kms_helper(E) libahci(E) nvme_fabrics(E) crc32c_intel(E) nvme(E) cdc_ether(E) mlx5_core(E) nvme_core(E) usbnet(E) drm(E) libata(E) ccp(E) ghash_clmulni_intel(E) mii(E) t10_pi(E) mlxfw(E) sp5100_tco(E) psample(E) pci_hyperv_intf(E) wmi(E) dm_multipath(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) be2iscsi(E) bnx2i(E) cnic(E) uio(E) cxgb4i(E) cxgb4(E) tls(E) libcxgbi(E) libcxgb(E) qla4xxx(E)
[ 549.225752] iscsi_boot_sysfs(E) iscsi_tcp(E) libiscsi_tcp(E) libiscsi(E) scsi_transport_iscsi(E) fuse(E) [last unloaded: gsp_log(E)]
[ 549.326293] CPU: 8 PID: 6314 Comm: insmod Tainted: G E 6.9.0-rc6+ #1
[ 549.334039] Hardware name: ASRockRack 1U1G-MILAN/N/ROMED8-NL, BIOS L3.12E 09/06/2022
[ 549.341781] RIP: 0010:r535_gsp_msgq_wait+0xd0/0x190 [nvkm]
[ 549.347343] Code: 08 00 00 89 da c1 e2 0c 48 8d ac 11 00 10 00 00 48 8b 0c 24 48 85 c9 74 1f c1 e0 0c 4c 8d 6d 30 83 e8 30 89 01 e9 68 ff ff ff <0f> 0b 49 c7 c5 92 ff ff ff e9 5a ff ff ff ba ff ff ff ff be c0 0c
[ 549.366090] RSP: 0018:ffffacbccaaeb7d0 EFLAGS: 00010246
[ 549.371315] RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000923e28
[ 549.378451] RDX: 0000000000000000 RSI: 0000000055555554 RDI: ffffacbccaaeb730
[ 549.385590] RBP: 0000000000000001 R08: ffff8bd14d235f70 R09: ffff8bd14d235f70
[ 549.392721] R10: 0000000000000002 R11: ffff8bd14d233864 R12: 0000000000000020
[ 549.399854] R13: ffffacbccaaeb818 R14: 0000000000000020 R15: ffff8bb298c67000
[ 549.406988] FS: 00007f5179244740(0000) GS:ffff8bd14d200000(0000) knlGS:0000000000000000
[ 549.415076] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.420829] CR2: 00007fa844000010 CR3: 00000001567dc005 CR4: 0000000000770ef0
[ 549.427963] PKRU: 55555554
[ 549.430672] Call Trace:
[ 549.433126] <TASK>
[ 549.435233] ? __warn+0x7f/0x130
[ 549.438473] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm]
[ 549.443426] ? report_bug+0x18a/0x1a0
[ 549.447098] ? handle_bug+0x3c/0x70
[ 549.450589] ? exc_invalid_op+0x14/0x70
[ 549.454430] ? asm_exc_invalid_op+0x16/0x20
[ 549.458619] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm]
[ 549.463565] r535_gsp_msg_recv+0x46/0x230 [nvkm]
[ 549.468257] r535_gsp_rpc_push+0x106/0x160 [nvkm]
[ 549.473033] r535_gsp_rpc_rm_ctrl_push+0x40/0x130 [nvkm]
[ 549.478422] nvidia_grid_init_vgpu_types+0xbc/0xe0 [nvkm]
[ 549.483899] nvidia_grid_init+0xb1/0xd0 [nvkm]
[ 549.488420] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.493213] nvkm_device_pci_probe+0x305/0x420 [nvkm]
[ 549.498338] local_pci_probe+0x46/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma queue left shift overflow issue
When queue number is > 4, left shift overflows due to 32 bits
integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1.
If CONFIG_UBSAN is enabled, kernel dumps below warning:
[ 10.363842] ==================================================================
[ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/
linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12
[ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int'
[ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg
[ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021
[ 10.363958] Call Trace:
[ 10.363960] <TASK>
[ 10.363963] dump_stack_lvl+0x4a/0x5f
[ 10.363971] dump_stack+0x10/0x12
[ 10.363974] ubsan_epilogue+0x9/0x45
[ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
[ 10.363979] ? wake_up_klogd+0x4a/0x50
[ 10.363983] ? vprintk_emit+0x8f/0x240
[ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac]
[ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac]
[ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac]
[ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac]
[ 10.364030] ? page_pool_alloc_pages+0x4d/0x70
[ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac]
[ 10.364042] stmmac_open+0x39e/0x920 [stmmac]
[ 10.364050] __dev_open+0xf0/0x1a0
[ 10.364054] __dev_change_flags+0x188/0x1f0
[ 10.364057] dev_change_flags+0x26/0x60
[ 10.364059] do_setlink+0x908/0xc40
[ 10.364062] ? do_setlink+0xb10/0xc40
[ 10.364064] ? __nla_validate_parse+0x4c/0x1a0
[ 10.364068] __rtnl_newlink+0x597/0xa10
[ 10.364072] ? __nla_reserve+0x41/0x50
[ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0
[ 10.364079] ? pskb_expand_head+0x75/0x310
[ 10.364082] ? nla_reserve_64bit+0x21/0x40
[ 10.364086] ? skb_free_head+0x65/0x80
[ 10.364089] ? security_sock_rcv_skb+0x2c/0x50
[ 10.364094] ? __cond_resched+0x19/0x30
[ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420
[ 10.364100] rtnl_newlink+0x49/0x70
This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue
mapping warning.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195 |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero
It is possible to disable VFs while the PF driver is processing requests
from the VF driver. This can result in a panic.
BUG: unable to handle kernel paging request at 000000000000106c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- -
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe]
Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff
01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c
00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a
RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002
RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006
RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780
R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020
R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80
FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? ttwu_do_wakeup+0x19/0x140
? try_to_wake_up+0x1cd/0x550
? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf]
ixgbe_msix_other+0x17e/0x310 [ixgbe]
__handle_irq_event_percpu+0x40/0x180
handle_irq_event_percpu+0x30/0x80
handle_irq_event+0x36/0x53
handle_edge_irq+0x82/0x190
handle_irq+0x1c/0x30
do_IRQ+0x49/0xd0
common_interrupt+0xf/0xf
This can be eventually be reproduced with the following script:
while :
do
echo 63 > /sys/class/net/<devname>/device/sriov_numvfs
sleep 1
echo 0 > /sys/class/net/<devname>/device/sriov_numvfs
sleep 1
done
Add lock when disabling SR-IOV to prevent process VF mailbox communication. |
| In the Linux kernel, the following vulnerability has been resolved:
be2net: Fix buffer overflow in be_get_module_eeprom
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.
Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/lbr: Fix unchecked MSR access error on HSW
The fuzzer triggers the below trace.
[ 7763.384369] unchecked MSR access error: WRMSR to 0x689
(tried to write 0x1fffffff8101349e) at rIP: 0xffffffff810704a4
(native_write_msr+0x4/0x20)
[ 7763.397420] Call Trace:
[ 7763.399881] <TASK>
[ 7763.401994] intel_pmu_lbr_restore+0x9a/0x1f0
[ 7763.406363] intel_pmu_lbr_sched_task+0x91/0x1c0
[ 7763.410992] __perf_event_task_sched_in+0x1cd/0x240
On a machine with the LBR format LBR_FORMAT_EIP_FLAGS2, when the TSX is
disabled, a TSX quirk is required to access LBR from registers.
The lbr_from_signext_quirk_needed() is introduced to determine whether
the TSX quirk should be applied. However, the
lbr_from_signext_quirk_needed() is invoked before the
intel_pmu_lbr_init(), which parses the LBR format information. Without
the correct LBR format information, the TSX quirk never be applied.
Move the lbr_from_signext_quirk_needed() into the intel_pmu_lbr_init().
Checking x86_pmu.lbr_has_tsx in the lbr_from_signext_quirk_needed() is
not required anymore.
Both LBR_FORMAT_EIP_FLAGS2 and LBR_FORMAT_INFO have LBR_TSX flag, but
only the LBR_FORMAT_EIP_FLAGS2 requirs the quirk. Update the comments
accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use __try_cmpxchg_user() to update guest PTE A/D bits
Use the recently introduced __try_cmpxchg_user() to update guest PTE A/D
bits instead of mapping the PTE into kernel address space. The VM_PFNMAP
path is broken as it assumes that vm_pgoff is the base pfn of the mapped
VMA range, which is conceptually wrong as vm_pgoff is the offset relative
to the file and has nothing to do with the pfn. The horrific hack worked
for the original use case (backing guest memory with /dev/mem), but leads
to accessing "random" pfns for pretty much any other VM_PFNMAP case. |
| Unity Runtime before 2025-10-02 on Android, Windows, macOS, and Linux allows argument injection that can result in loading of library code from an unintended location. If an application was built with a version of Unity Editor that had the vulnerable Unity Runtime code, then an adversary may be able to execute code on, and exfiltrate confidential information from, the machine on which that application is running. NOTE: product status is provided for Unity Editor because that is the information available from the Supplier. However, updating Unity Editor typically does not address the effects of the vulnerability; instead, it is necessary to rebuild and redeploy all affected applications. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate BOOT sectors_per_clusters
When the NTFS BOOT sectors_per_clusters field is > 0x80, it represents a
shift value. Make sure that the shift value is not too large before using
it (NTFS max cluster size is 2MB). Return -EVINVAL if it too large.
This prevents negative shift values and shift values that are larger than
the field size.
Prevents this UBSAN error:
UBSAN: shift-out-of-bounds in ../fs/ntfs3/super.c:673:16
shift exponent -192 is negative |
| In the Linux kernel, the following vulnerability has been resolved:
zsmalloc: fix races between asynchronous zspage free and page migration
The asynchronous zspage free worker tries to lock a zspage's entire page
list without defending against page migration. Since pages which haven't
yet been locked can concurrently migrate off the zspage page list while
lock_zspage() churns away, lock_zspage() can suffer from a few different
lethal races.
It can lock a page which no longer belongs to the zspage and unsafely
dereference page_private(), it can unsafely dereference a torn pointer to
the next page (since there's a data race), and it can observe a spurious
NULL pointer to the next page and thus not lock all of the zspage's pages
(since a single page migration will reconstruct the entire page list, and
create_page_chain() unconditionally zeroes out each list pointer in the
process).
Fix the races by using migrate_read_lock() in lock_zspage() to synchronize
with page migration. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Use del_timer_sync() before freeing
While looking at a crash report on a timer list being corrupted, which
usually happens when a timer is freed while still active. This is
commonly triggered by code calling del_timer() instead of
del_timer_sync() just before freeing.
One possible culprit is the hci_qca driver, which does exactly that.
Eric mentioned that wake_retrans_timer could be rearmed via the work
queue, so also move the destruction of the work queue before
del_timer_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits
In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use
rx-offload to ensure skbs are sent from softirq context") the RX path
for peripheral devices was switched to RX-offload.
Received CAN frames are pushed to RX-offload together with a
timestamp. RX-offload is designed to handle overflows of the timestamp
correctly, if 32 bit timestamps are provided.
The timestamps of m_can core are only 16 bits wide. So this patch
shifts them to full 32 bit before passing them to RX-offload. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave',
i.e. to KVM's historical uABI size. When saving FPU state for usersapce,
KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if
the host doesn't support XSAVE. Setting the XSAVE header allows the VM
to be migrated to a host that does support XSAVE without the new host
having to handle FPU state that may or may not be compatible with XSAVE.
Setting the uABI size to the host's default size results in out-of-bounds
writes (setting the FP+SSE bits) and data corruption (that is thankfully
caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs.
WARN if the default size is larger than KVM's historical uABI size; all
features that can push the FPU size beyond the historical size must be
opt-in.
==================================================================
BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130
Read of size 8 at addr ffff888011e33a00 by task qemu-build/681
CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1
Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x45
print_report.cold+0x45/0x575
kasan_report+0x9b/0xd0
fpu_copy_uabi_to_guest_fpstate+0x86/0x130
kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm]
kvm_vcpu_ioctl+0x47f/0x7b0 [kvm]
__x64_sys_ioctl+0x5de/0xc90
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Allocated by task 0:
(stack is not available)
The buggy address belongs to the object at ffff888011e33800
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes to the right of
512-byte region [ffff888011e33800, ffff888011e33a00)
The buggy address belongs to the physical page:
page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30
head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=1)
raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
When larbdev is NULL (in the case I hit, the node is incorrectly set
iommus = <&iommu NUM>), it will cause device_link_add() fail and
kernel crashes when we try to print dev_name(larbdev).
Let's fail the probe if a larbdev is NULL to avoid invalid inputs from
dts.
It should work for normal correct setting and avoid the crash caused
by my incorrect setting.
Error log:
[ 18.189042][ T301] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
...
[ 18.344519][ T301] pstate: a0400005 (NzCv daif +PAN -UAO)
[ 18.345213][ T301] pc : mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
[ 18.346050][ T301] lr : mtk_iommu_probe_device+0xd0/0x118 [mtk_iommu]
[ 18.346884][ T301] sp : ffffffc00a5635e0
[ 18.347392][ T301] x29: ffffffc00a5635e0 x28: ffffffd44a46c1d8
[ 18.348156][ T301] x27: ffffff80c39a8000 x26: ffffffd44a80cc38
[ 18.348917][ T301] x25: 0000000000000000 x24: ffffffd44a80cc38
[ 18.349677][ T301] x23: ffffffd44e4da4c6 x22: ffffffd44a80cc38
[ 18.350438][ T301] x21: ffffff80cecd1880 x20: 0000000000000000
[ 18.351198][ T301] x19: ffffff80c439f010 x18: ffffffc00a50d0c0
[ 18.351959][ T301] x17: ffffffffffffffff x16: 0000000000000004
[ 18.352719][ T301] x15: 0000000000000004 x14: ffffffd44eb5d420
[ 18.353480][ T301] x13: 0000000000000ad2 x12: 0000000000000003
[ 18.354241][ T301] x11: 00000000fffffad2 x10: c0000000fffffad2
[ 18.355003][ T301] x9 : a0d288d8d7142d00 x8 : a0d288d8d7142d00
[ 18.355763][ T301] x7 : ffffffd44c2bc640 x6 : 0000000000000000
[ 18.356524][ T301] x5 : 0000000000000080 x4 : 0000000000000001
[ 18.357284][ T301] x3 : 0000000000000000 x2 : 0000000000000005
[ 18.358045][ T301] x1 : 0000000000000000 x0 : 0000000000000000
[ 18.360208][ T301] Hardware name: MT6873 (DT)
[ 18.360771][ T301] Call trace:
[ 18.361168][ T301] dump_backtrace+0xf8/0x1f0
[ 18.361737][ T301] dump_stack_lvl+0xa8/0x11c
[ 18.362305][ T301] dump_stack+0x1c/0x2c
[ 18.362816][ T301] mrdump_common_die+0x184/0x40c [mrdump]
[ 18.363575][ T301] ipanic_die+0x24/0x38 [mrdump]
[ 18.364230][ T301] atomic_notifier_call_chain+0x128/0x2b8
[ 18.364937][ T301] die+0x16c/0x568
[ 18.365394][ T301] __do_kernel_fault+0x1e8/0x214
[ 18.365402][ T301] do_page_fault+0xb8/0x678
[ 18.366934][ T301] do_translation_fault+0x48/0x64
[ 18.368645][ T301] do_mem_abort+0x68/0x148
[ 18.368652][ T301] el1_abort+0x40/0x64
[ 18.368660][ T301] el1h_64_sync_handler+0x54/0x88
[ 18.368668][ T301] el1h_64_sync+0x68/0x6c
[ 18.368673][ T301] mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
... |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix dereference of stale list iterator after loop body
The list iterator variable will be a bogus pointer if no break was hit.
Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined
value making it unsafe to use that in the comparision to determine if the
specific element was found.
Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that
by chance (or intention of an attacker) it matches the value of 'page'
even though the correct element was not found.
This is fixed by using a separate list iterator variable for the loop
and only setting the original variable if a suitable element was found.
Then determing if the element was found is simply checking if the
variable is set. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Remove clk_disable in mtk_iommu_remove
After the commit b34ea31fe013 ("iommu/mediatek: Always enable the clk on
resume"), the iommu clock is controlled by the runtime callback.
thus remove the clk control in the mtk_iommu_remove.
Otherwise, it will warning like:
echo 14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind
[ 51.413044] ------------[ cut here ]------------
[ 51.413648] vpp0_smi_iommu already disabled
[ 51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/
drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8
[ 51.417174] Hardware name: MT8195V/C(ENG) (DT)
[ 51.418635] pc : clk_core_disable+0xb0/0xb8
[ 51.419177] lr : clk_core_disable+0xb0/0xb8
...
[ 51.429375] Call trace:
[ 51.429694] clk_core_disable+0xb0/0xb8
[ 51.430193] clk_core_disable_lock+0x24/0x40
[ 51.430745] clk_disable+0x20/0x30
[ 51.431189] mtk_iommu_remove+0x58/0x118
[ 51.431705] platform_remove+0x28/0x60
[ 51.432197] device_release_driver_internal+0x110/0x1f0
[ 51.432873] device_driver_detach+0x18/0x28
[ 51.433418] unbind_store+0xd4/0x108
[ 51.433886] drv_attr_store+0x24/0x38
[ 51.434363] sysfs_kf_write+0x40/0x58
[ 51.434843] kernfs_fop_write_iter+0x164/0x1e0 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on inline_dots inode
As Wenqing reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215765
It will cause a kernel panic with steps:
- mkdir mnt
- mount tmp40.img mnt
- ls mnt
folio_mark_dirty+0x33/0x50
f2fs_add_regular_entry+0x541/0xad0 [f2fs]
f2fs_add_dentry+0x6c/0xb0 [f2fs]
f2fs_do_add_link+0x182/0x230 [f2fs]
__recover_dot_dentries+0x2d6/0x470 [f2fs]
f2fs_lookup+0x5af/0x6a0 [f2fs]
__lookup_slow+0xac/0x200
lookup_slow+0x45/0x70
walk_component+0x16c/0x250
path_lookupat+0x8b/0x1f0
filename_lookup+0xef/0x250
user_path_at_empty+0x46/0x70
vfs_statx+0x98/0x190
__do_sys_newlstat+0x41/0x90
__x64_sys_newlstat+0x1a/0x30
do_syscall_64+0x37/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is for special file: e.g. character, block, fifo or
socket file, f2fs doesn't assign address space operations pointer array
for mapping->a_ops field, so, in a fuzzed image, if inline_dots flag was
tagged in special file, during lookup(), when f2fs runs into
__recover_dot_dentries(), it will cause NULL pointer access once
f2fs_add_regular_entry() calls a_ops->set_dirty_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: double hook unregistration in netns path
__nft_release_hooks() is called from pre_netns exit path which
unregisters the hooks, then the NETDEV_UNREGISTER event is triggered
which unregisters the hooks again.
[ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270
[...]
[ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27
[ 565.253682] Workqueue: netns cleanup_net
[ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270
[...]
[ 565.297120] Call Trace:
[ 565.300900] <TASK>
[ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables]
[ 565.308518] raw_notifier_call_chain+0x63/0x80
[ 565.312386] unregister_netdevice_many+0x54f/0xb50
Unregister and destroy netdev hook from netns pre_exit via kfree_rcu
so the NETDEV_UNREGISTER path see unregistered hooks. |
