| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: Allocate memory for driver private data
Fix driver not allocating memory for struct btintel_data which is used
to store internal data. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: fix kexec crash due to VP assist page corruption
commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when
CPUs go online/offline") introduces a new cpuhp state for hyperv
initialization.
cpuhp_setup_state() returns the state number if state is
CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states.
For the hyperv case, since a new cpuhp state was introduced it would
return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call
is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and
so hv_cpu_die() won't be called on all CPUs. This means the VP assist page
won't be reset. When the kexec kernel tries to setup the VP assist page
again, the hypervisor corrupts the memory region of the old VP assist page
causing a panic in case the kexec kernel is using that memory elsewhere.
This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec
panic/hang issues").
Get rid of hyperv_init_cpuhp entirely since we are no longer using a
dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with
cpuhp_remove_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: ipheth: do not stop RX on failing RX callback
RX callbacks can fail for multiple reasons:
* Payload too short
* Payload formatted incorrecly (e.g. bad NCM framing)
* Lack of memory
None of these should cause the driver to seize up.
Make such failures non-critical and continue processing further
incoming URBs. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: don't BUG_ON() if khugepaged yanks our page table
Since khugepaged was changed to allow retracting page tables in file
mappings without holding the mmap lock, these BUG_ON()s are wrong - get
rid of them.
We could also remove the preceding "if (unlikely(...))" block, but then we
could reach pte_offset_map_lock() with transhuge pages not just for file
mappings but also for anonymous mappings - which would probably be fine
but I think is not necessarily expected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Restrict high priorities on group_create
We were allowing any users to create a high priority group without any
permission checks. As a result, this was allowing possible denial of
service.
We now only allow the DRM master or users with the CAP_SYS_NICE
capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM.
As the sole user of that uAPI lives in Mesa and hardcode a value of
MEDIUM [1], this should be safe to do.
Additionally, as those checks are performed at the ioctl level,
panthor_group_create now only check for priority level validity.
[1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix firmware crash due to invalid peer nss
Currently, if the access point receives an association
request containing an Extended HE Capabilities Information
Element with an invalid MCS-NSS, it triggers a firmware
crash.
This issue arises when EHT-PHY capabilities shows support
for a bandwidth and MCS-NSS set for that particular
bandwidth is filled by zeros and due to this, driver obtains
peer_nss as 0 and sending this value to firmware causes
crash.
Address this issue by implementing a validation step for
the peer_nss value before passing it to the firmware. If
the value is greater than zero, proceed with forwarding
it to the firmware. However, if the value is invalid,
reject the association request to prevent potential
firmware crashes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: remove irq disabling in vcn 5 suspend
We do not directly enable/disable VCN IRQ in vcn 5.0.0.
And we do not handle the IRQ state as well. So the calls to
disable IRQ and set state are removed. This effectively gets
rid of the warining of
"WARN_ON(!amdgpu_irq_enabled(adev, src, type))"
in amdgpu_irq_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
libfs: fix get_stashed_dentry()
get_stashed_dentry() tries to optimistically retrieve a stashed dentry
from a provided location. It needs to ensure to hold rcu lock before it
dereference the stashed location to prevent UAF issues. Use
rcu_dereference() instead of READ_ONCE() it's effectively equivalent
with some lockdep bells and whistles and it communicates clearly that
this expects rcu protection. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: misaligned: Restrict user access to kernel memory
raw_copy_{to,from}_user() do not call access_ok(), so this code allowed
userspace to access any virtual memory address. |
| In the Linux kernel, the following vulnerability has been resolved:
codetag: debug: mark codetags for poisoned page as empty
When PG_hwpoison pages are freed they are treated differently in
free_pages_prepare() and instead of being released they are isolated.
Page allocation tag counters are decremented at this point since the page
is considered not in use. Later on when such pages are released by
unpoison_memory(), the allocation tag counters will be decremented again
and the following warning gets reported:
[ 113.930443][ T3282] ------------[ cut here ]------------
[ 113.931105][ T3282] alloc_tag was not set
[ 113.931576][ T3282] WARNING: CPU: 2 PID: 3282 at ./include/linux/alloc_tag.h:130 pgalloc_tag_sub.part.66+0x154/0x164
[ 113.932866][ T3282] Modules linked in: hwpoison_inject fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_man4
[ 113.941638][ T3282] CPU: 2 UID: 0 PID: 3282 Comm: madvise11 Kdump: loaded Tainted: G W 6.11.0-rc4-dirty #18
[ 113.943003][ T3282] Tainted: [W]=WARN
[ 113.943453][ T3282] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
[ 113.944378][ T3282] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 113.945319][ T3282] pc : pgalloc_tag_sub.part.66+0x154/0x164
[ 113.946016][ T3282] lr : pgalloc_tag_sub.part.66+0x154/0x164
[ 113.946706][ T3282] sp : ffff800087093a10
[ 113.947197][ T3282] x29: ffff800087093a10 x28: ffff0000d7a9d400 x27: ffff80008249f0a0
[ 113.948165][ T3282] x26: 0000000000000000 x25: ffff80008249f2b0 x24: 0000000000000000
[ 113.949134][ T3282] x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000
[ 113.950597][ T3282] x20: ffff0000c08fcad8 x19: ffff80008251e000 x18: ffffffffffffffff
[ 113.952207][ T3282] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800081746210
[ 113.953161][ T3282] x14: 0000000000000000 x13: 205d323832335420 x12: 5b5d353031313339
[ 113.954120][ T3282] x11: ffff800087093500 x10: 000000000000005d x9 : 00000000ffffffd0
[ 113.955078][ T3282] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008236ba90 x6 : c0000000ffff7fff
[ 113.956036][ T3282] x5 : ffff000b34bf4dc8 x4 : ffff8000820aba90 x3 : 0000000000000001
[ 113.956994][ T3282] x2 : ffff800ab320f000 x1 : 841d1e35ac932e00 x0 : 0000000000000000
[ 113.957962][ T3282] Call trace:
[ 113.958350][ T3282] pgalloc_tag_sub.part.66+0x154/0x164
[ 113.959000][ T3282] pgalloc_tag_sub+0x14/0x1c
[ 113.959539][ T3282] free_unref_page+0xf4/0x4b8
[ 113.960096][ T3282] __folio_put+0xd4/0x120
[ 113.960614][ T3282] folio_put+0x24/0x50
[ 113.961103][ T3282] unpoison_memory+0x4f0/0x5b0
[ 113.961678][ T3282] hwpoison_unpoison+0x30/0x48 [hwpoison_inject]
[ 113.962436][ T3282] simple_attr_write_xsigned.isra.34+0xec/0x1cc
[ 113.963183][ T3282] simple_attr_write+0x38/0x48
[ 113.963750][ T3282] debugfs_attr_write+0x54/0x80
[ 113.964330][ T3282] full_proxy_write+0x68/0x98
[ 113.964880][ T3282] vfs_write+0xdc/0x4d0
[ 113.965372][ T3282] ksys_write+0x78/0x100
[ 113.965875][ T3282] __arm64_sys_write+0x24/0x30
[ 113.966440][ T3282] invoke_syscall+0x7c/0x104
[ 113.966984][ T3282] el0_svc_common.constprop.1+0x88/0x104
[ 113.967652][ T3282] do_el0_svc+0x2c/0x38
[ 113.968893][ T3282] el0_svc+0x3c/0x1b8
[ 113.969379][ T3282] el0t_64_sync_handler+0x98/0xbc
[ 113.969980][ T3282] el0t_64_sync+0x19c/0x1a0
[ 113.970511][ T3282] ---[ end trace 0000000000000000 ]---
To fix this, clear the page tag reference after the page got isolated
and accounted for. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook
When enable CONFIG_MEMCG & CONFIG_KFENCE & CONFIG_KMEMLEAK, the following
warning always occurs,This is because the following call stack occurred:
mem_pool_alloc
kmem_cache_alloc_noprof
slab_alloc_node
kfence_alloc
Once the kfence allocation is successful,slab->obj_exts will not be empty,
because it has already been assigned a value in kfence_init_pool.
Since in the prepare_slab_obj_exts_hook function,we perform a check for
s->flags & (SLAB_NO_OBJ_EXT | SLAB_NOLEAKTRACE),the alloc_tag_add function
will not be called as a result.Therefore,ref->ct remains NULL.
However,when we call mem_pool_free,since obj_ext is not empty, it
eventually leads to the alloc_tag_sub scenario being invoked. This is
where the warning occurs.
So we should add corresponding checks in the alloc_tagging_slab_free_hook.
For __GFP_NO_OBJ_EXT case,I didn't see the specific case where it's using
kfence,so I won't add the corresponding check in
alloc_tagging_slab_free_hook for now.
[ 3.734349] ------------[ cut here ]------------
[ 3.734807] alloc_tag was not set
[ 3.735129] WARNING: CPU: 4 PID: 40 at ./include/linux/alloc_tag.h:130 kmem_cache_free+0x444/0x574
[ 3.735866] Modules linked in: autofs4
[ 3.736211] CPU: 4 UID: 0 PID: 40 Comm: ksoftirqd/4 Tainted: G W 6.11.0-rc3-dirty #1
[ 3.736969] Tainted: [W]=WARN
[ 3.737258] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
[ 3.737875] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.738501] pc : kmem_cache_free+0x444/0x574
[ 3.738951] lr : kmem_cache_free+0x444/0x574
[ 3.739361] sp : ffff80008357bb60
[ 3.739693] x29: ffff80008357bb70 x28: 0000000000000000 x27: 0000000000000000
[ 3.740338] x26: ffff80008207f000 x25: ffff000b2eb2fd60 x24: ffff0000c0005700
[ 3.740982] x23: ffff8000804229e4 x22: ffff800082080000 x21: ffff800081756000
[ 3.741630] x20: fffffd7ff8253360 x19: 00000000000000a8 x18: ffffffffffffffff
[ 3.742274] x17: ffff800ab327f000 x16: ffff800083398000 x15: ffff800081756df0
[ 3.742919] x14: 0000000000000000 x13: 205d344320202020 x12: 5b5d373038343337
[ 3.743560] x11: ffff80008357b650 x10: 000000000000005d x9 : 00000000ffffffd0
[ 3.744231] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008237bad0 x6 : c0000000ffff7fff
[ 3.744907] x5 : ffff80008237ba78 x4 : ffff8000820bbad0 x3 : 0000000000000001
[ 3.745580] x2 : 68d66547c09f7800 x1 : 68d66547c09f7800 x0 : 0000000000000000
[ 3.746255] Call trace:
[ 3.746530] kmem_cache_free+0x444/0x574
[ 3.746931] mem_pool_free+0x44/0xf4
[ 3.747306] free_object_rcu+0xc8/0xdc
[ 3.747693] rcu_do_batch+0x234/0x8a4
[ 3.748075] rcu_core+0x230/0x3e4
[ 3.748424] rcu_core_si+0x14/0x1c
[ 3.748780] handle_softirqs+0x134/0x378
[ 3.749189] run_ksoftirqd+0x70/0x9c
[ 3.749560] smpboot_thread_fn+0x148/0x22c
[ 3.749978] kthread+0x10c/0x118
[ 3.750323] ret_from_fork+0x10/0x20
[ 3.750696] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: fix checks for huge PMDs
Patch series "userfaultfd: fix races around pmd_trans_huge() check", v2.
The pmd_trans_huge() code in mfill_atomic() is wrong in three different
ways depending on kernel version:
1. The pmd_trans_huge() check is racy and can lead to a BUG_ON() (if you hit
the right two race windows) - I've tested this in a kernel build with
some extra mdelay() calls. See the commit message for a description
of the race scenario.
On older kernels (before 6.5), I think the same bug can even
theoretically lead to accessing transhuge page contents as a page table
if you hit the right 5 narrow race windows (I haven't tested this case).
2. As pointed out by Qi Zheng, pmd_trans_huge() is not sufficient for
detecting PMDs that don't point to page tables.
On older kernels (before 6.5), you'd just have to win a single fairly
wide race to hit this.
I've tested this on 6.1 stable by racing migration (with a mdelay()
patched into try_to_migrate()) against UFFDIO_ZEROPAGE - on my x86
VM, that causes a kernel oops in ptlock_ptr().
3. On newer kernels (>=6.5), for shmem mappings, khugepaged is allowed
to yank page tables out from under us (though I haven't tested that),
so I think the BUG_ON() checks in mfill_atomic() are just wrong.
I decided to write two separate fixes for these (one fix for bugs 1+2, one
fix for bug 3), so that the first fix can be backported to kernels
affected by bugs 1+2.
This patch (of 2):
This fixes two issues.
I discovered that the following race can occur:
mfill_atomic other thread
============ ============
<zap PMD>
pmdp_get_lockless() [reads none pmd]
<bail if trans_huge>
<if none:>
<pagefault creates transhuge zeropage>
__pte_alloc [no-op]
<zap PMD>
<bail if pmd_trans_huge(*dst_pmd)>
BUG_ON(pmd_none(*dst_pmd))
I have experimentally verified this in a kernel with extra mdelay() calls;
the BUG_ON(pmd_none(*dst_pmd)) triggers.
On kernels newer than commit 0d940a9b270b ("mm/pgtable: allow
pte_offset_map[_lock]() to fail"), this can't lead to anything worse than
a BUG_ON(), since the page table access helpers are actually designed to
deal with page tables concurrently disappearing; but on older kernels
(<=6.4), I think we could probably theoretically race past the two
BUG_ON() checks and end up treating a hugepage as a page table.
The second issue is that, as Qi Zheng pointed out, there are other types
of huge PMDs that pmd_trans_huge() can't catch: devmap PMDs and swap PMDs
(in particular, migration PMDs).
On <=6.4, this is worse than the first issue: If mfill_atomic() runs on a
PMD that contains a migration entry (which just requires winning a single,
fairly wide race), it will pass the PMD to pte_offset_map_lock(), which
assumes that the PMD points to a page table.
Breakage follows: First, the kernel tries to take the PTE lock (which will
crash or maybe worse if there is no "struct page" for the address bits in
the migration entry PMD - I think at least on X86 there usually is no
corresponding "struct page" thanks to the PTE inversion mitigation, amd64
looks different).
If that didn't crash, the kernel would next try to write a PTE into what
it wrongly thinks is a page table.
As part of fixing these issues, get rid of the check for pmd_trans_huge()
before __pte_alloc() - that's redundant, we're going to have to check for
that after the __pte_alloc() anyway.
Backport note: pmdp_get_lockless() is pmd_read_atomic() in older kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Disable coherent dumb buffers without 3d
Coherent surfaces make only sense if the host renders to them using
accelerated apis. Without 3d the entire content of dumb buffers stays
in the guest making all of the extra work they're doing to synchronize
between guest and host useless.
Configurations without 3d also tend to run with very low graphics
memory limits. The pinned console fb, mob cursors and graphical login
manager tend to run out of 16MB graphics memory that those guests use.
Fix it by making sure the coherent dumb buffers are only used on
configs with 3d enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: qcom: x1e80100: Fix special pin offsets
Remove the erroneus 0x100000 offset to prevent the boards from crashing
on pin state setting, as well as for the intended state changes to take
effect. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel
sometimes boot hang. It is because normal console still is not ready,
but runtime suspend is called, so early console putchar will hang
in waiting TRDE set in UARTSTAT.
The lpuart driver has auto suspend delay set to 3000ms, but during
uart_add_one_port, a child device serial ctrl will added and probed with
its pm runtime enabled(see serial_ctrl.c).
The runtime suspend call path is:
device_add
|-> bus_probe_device
|->device_initial_probe
|->__device_attach
|-> pm_runtime_get_sync(dev->parent);
|-> pm_request_idle(dev);
|-> pm_runtime_put(dev->parent);
So in the end, before normal console ready, the lpuart get runtime
suspended. And earlycon putchar will hang.
To address the issue, mark last busy just after pm_runtime_enable,
three seconds is long enough to switch from bootconsole to normal
console. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix spruious data race in __flush_work()
When flushing a work item for cancellation, __flush_work() knows that it
exclusively owns the work item through its PENDING bit. 134874e2eee9
("workqueue: Allow cancel_work_sync() and disable_work() from atomic
contexts on BH work items") added a read of @work->data to determine whether
to use busy wait for BH work items that are being canceled. While the read
is safe when @from_cancel, @work->data was read before testing @from_cancel
to simplify code structure:
data = *work_data_bits(work);
if (from_cancel &&
!WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) {
While the read data was never used if !@from_cancel, this could trigger
KCSAN data race detection spuriously:
==================================================================
BUG: KCSAN: data-race in __flush_work / __flush_work
write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0:
instrument_write include/linux/instrumented.h:41 [inline]
___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline]
insert_wq_barrier kernel/workqueue.c:3790 [inline]
start_flush_work kernel/workqueue.c:4142 [inline]
__flush_work+0x30b/0x570 kernel/workqueue.c:4178
flush_work kernel/workqueue.c:4229 [inline]
...
read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1:
__flush_work+0x42a/0x570 kernel/workqueue.c:4188
flush_work kernel/workqueue.c:4229 [inline]
flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251
...
value changed: 0x0000000000400000 -> 0xffff88810006c00d
Reorganize the code so that @from_cancel is tested before @work->data is
accessed. The only problem is triggering KCSAN detection spuriously. This
shouldn't need READ_ONCE() or other access qualifiers.
No functional changes. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940.
Kevin reported that this causes a crash during suspend on platforms that
dont use PM domains. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Disable preemption while updating GPU stats
We forgot to disable preemption around the write_seqcount_begin/end() pair
while updating GPU stats:
[ ] WARNING: CPU: 2 PID: 12 at include/linux/seqlock.h:221 __seqprop_assert.isra.0+0x128/0x150 [v3d]
[ ] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
<...snip...>
[ ] Call trace:
[ ] __seqprop_assert.isra.0+0x128/0x150 [v3d]
[ ] v3d_job_start_stats.isra.0+0x90/0x218 [v3d]
[ ] v3d_bin_job_run+0x23c/0x388 [v3d]
[ ] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ ] process_one_work+0x62c/0xb48
[ ] worker_thread+0x468/0x5b0
[ ] kthread+0x1c4/0x1e0
[ ] ret_from_fork+0x10/0x20
Fix it. |
