| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Start the RTC update work later
The RTC update work involves runtime resuming the UFS controller. Hence,
only start the RTC update work after runtime power management in the UFS
driver has been fully initialized. This patch fixes the following kernel
crash:
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Workqueue: events ufshcd_rtc_work
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
pm_runtime_get_if_active+0x24/0x9c (L)
pm_runtime_get_if_active+0x24/0x9c
ufshcd_rtc_work+0x138/0x1b4
process_one_work+0x148/0x288
worker_thread+0x2cc/0x3d4
kthread+0x110/0x114
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
fork: only invoke khugepaged, ksm hooks if no error
There is no reason to invoke these hooks early against an mm that is in an
incomplete state.
The change in commit d24062914837 ("fork: use __mt_dup() to duplicate
maple tree in dup_mmap()") makes this more pertinent as we may be in a
state where entries in the maple tree are not yet consistent.
Their placement early in dup_mmap() only appears to have been meaningful
for early error checking, and since functionally it'd require a very small
allocation to fail (in practice 'too small to fail') that'd only occur in
the most dire circumstances, meaning the fork would fail or be OOM'd in
any case.
Since both khugepaged and KSM tracking are there to provide optimisations
to memory performance rather than critical functionality, it doesn't
really matter all that much if, under such dire memory pressure, we fail
to register an mm with these.
As a result, we follow the example of commit d2081b2bf819 ("mm:
khugepaged: make khugepaged_enter() void function") and make ksm_fork() a
void function also.
We only expose the mm to these functions once we are done with them and
only if no error occurred in the fork operation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop
Driver waits indefinitely for the fifo occupancy to go below a threshold
as soon as the pacing interrupt is received. This can cause soft lockup on
one of the processors, if the rate of DB is very high.
Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th
if the loop is taking more time. Pacing will be continuing until the
occupancy is below the threshold. This is ensured by the checks in
bnxt_re_pacing_timer_exp and further scheduling the work for pacing based
on the fifo occupancy. |
| In the Linux kernel, the following vulnerability has been resolved:
reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC
data->asserted will be NULL on JH7110 SoC since commit 82327b127d41
("reset: starfive: Add StarFive JH7110 reset driver") was added. Add
the judgment condition to avoid errors when calling reset_control_status
on JH7110 SoC. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix overflow in oa batch buffer
By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch
buffer, this is not a problem if batch buffer is only used once but
oa reuses the batch buffer for the same metric and at each call
it appends a MI_BATCH_BUFFER_END, printing the warning below and then
overflowing.
[ 381.072016] ------------[ cut here ]------------
[ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed!
platform: LUNARLAKE subplatform: 1
graphics: Xe2_LPG / Xe2_HPG 20.04 step B0
media: Xe2_LPM / Xe2_HPM 20.00 step B0
tile: 0 VRAM 0 B
GT: 0 type 1
So here checking if batch buffer already have MI_BATCH_BUFFER_END if
not append it.
v2:
- simply fix, suggestion from Ashutosh
(cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fbdev-dma: Only cleanup deferred I/O if necessary
Commit 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if
necessary") initializes deferred I/O only if it is used.
drm_fbdev_dma_fb_destroy() however calls fb_deferred_io_cleanup()
unconditionally with struct fb_info.fbdefio == NULL. KASAN with the
out-of-tree Apple silicon display driver posts following warning from
__flush_work() of a random struct work_struct instead of the expected
NULL pointer derefs.
[ 22.053799] ------------[ cut here ]------------
[ 22.054832] WARNING: CPU: 2 PID: 1 at kernel/workqueue.c:4177 __flush_work+0x4d8/0x580
[ 22.056597] Modules linked in: uhid bnep uinput nls_ascii ip6_tables ip_tables i2c_dev loop fuse dm_multipath nfnetlink zram hid_magicmouse btrfs xor xor_neon brcmfmac_wcc raid6_pq hci_bcm4377 bluetooth brcmfmac hid_apple brcmutil nvmem_spmi_mfd simple_mfd_spmi dockchannel_hid cfg80211 joydev regmap_spmi nvme_apple ecdh_generic ecc macsmc_hid rfkill dwc3 appledrm snd_soc_macaudio macsmc_power nvme_core apple_isp phy_apple_atc apple_sart apple_rtkit_helper apple_dockchannel tps6598x macsmc_hwmon snd_soc_cs42l84 videobuf2_v4l2 spmi_apple_controller nvmem_apple_efuses videobuf2_dma_sg apple_z2 videobuf2_memops spi_nor panel_summit videobuf2_common asahi videodev pwm_apple apple_dcp snd_soc_apple_mca apple_admac spi_apple clk_apple_nco i2c_pasemi_platform snd_pcm_dmaengine mc i2c_pasemi_core mux_core ofpart adpdrm drm_dma_helper apple_dart apple_soc_cpufreq leds_pwm phram
[ 22.073768] CPU: 2 UID: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.11.2-asahi+ #asahi-dev
[ 22.075612] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)
[ 22.077032] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 22.078567] pc : __flush_work+0x4d8/0x580
[ 22.079471] lr : __flush_work+0x54/0x580
[ 22.080345] sp : ffffc000836ef820
[ 22.081089] x29: ffffc000836ef880 x28: 0000000000000000 x27: ffff80002ddb7128
[ 22.082678] x26: dfffc00000000000 x25: 1ffff000096f0c57 x24: ffffc00082d3e358
[ 22.084263] x23: ffff80004b7862b8 x22: dfffc00000000000 x21: ffff80005aa1d470
[ 22.085855] x20: ffff80004b786000 x19: ffff80004b7862a0 x18: 0000000000000000
[ 22.087439] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000005
[ 22.089030] x14: 1ffff800106ddf0a x13: 0000000000000000 x12: 0000000000000000
[ 22.090618] x11: ffffb800106ddf0f x10: dfffc00000000000 x9 : 1ffff800106ddf0e
[ 22.092206] x8 : 0000000000000000 x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000001
[ 22.093790] x5 : ffffc000836ef728 x4 : 0000000000000000 x3 : 0000000000000020
[ 22.095368] x2 : 0000000000000008 x1 : 00000000000000aa x0 : 0000000000000000
[ 22.096955] Call trace:
[ 22.097505] __flush_work+0x4d8/0x580
[ 22.098330] flush_delayed_work+0x80/0xb8
[ 22.099231] fb_deferred_io_cleanup+0x3c/0x130
[ 22.100217] drm_fbdev_dma_fb_destroy+0x6c/0xe0 [drm_dma_helper]
[ 22.101559] unregister_framebuffer+0x210/0x2f0
[ 22.102575] drm_fb_helper_unregister_info+0x48/0x60
[ 22.103683] drm_fbdev_dma_client_unregister+0x4c/0x80 [drm_dma_helper]
[ 22.105147] drm_client_dev_unregister+0x1cc/0x230
[ 22.106217] drm_dev_unregister+0x58/0x570
[ 22.107125] apple_drm_unbind+0x50/0x98 [appledrm]
[ 22.108199] component_del+0x1f8/0x3a8
[ 22.109042] dcp_platform_shutdown+0x24/0x38 [apple_dcp]
[ 22.110357] platform_shutdown+0x70/0x90
[ 22.111219] device_shutdown+0x368/0x4d8
[ 22.112095] kernel_restart+0x6c/0x1d0
[ 22.112946] __arm64_sys_reboot+0x1c8/0x328
[ 22.113868] invoke_syscall+0x78/0x1a8
[ 22.114703] do_el0_svc+0x124/0x1a0
[ 22.115498] el0_svc+0x3c/0xe0
[ 22.116181] el0t_64_sync_handler+0x70/0xc0
[ 22.117110] el0t_64_sync+0x190/0x198
[ 22.117931] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Reference count the zone in thermal_zone_get_by_id()
There are places in the thermal netlink code where nothing prevents
the thermal zone object from going away while being accessed after it
has been returned by thermal_zone_get_by_id().
To address this, make thermal_zone_get_by_id() get a reference on the
thermal zone device object to be returned with the help of get_device(),
under thermal_list_lock, and adjust all of its callers to this change
with the help of the cleanup.h infrastructure. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Move flush_work initialization out of if block
After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a
work queue"), it can happen that a work item is sent to an uninitialized
work queue. This may has the effect that the item being queued is never
actually queued, and any further actions depending on it will not
proceed.
The following warning is observed while the fnic driver is loaded:
kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410
kernel: <IRQ>
kernel: queue_work_on+0x3a/0x50
kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: __handle_irq_event_percpu+0x36/0x1a0
kernel: handle_irq_event_percpu+0x30/0x70
kernel: handle_irq_event+0x34/0x60
kernel: handle_edge_irq+0x7e/0x1a0
kernel: __common_interrupt+0x3b/0xb0
kernel: common_interrupt+0x58/0xa0
kernel: </IRQ>
It has been observed that this may break the rediscovery of Fibre
Channel devices after a temporary fabric failure.
This patch fixes it by moving the work queue initialization out of
an if block in fnic_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: Remove LED entry from LEDs list on unregister
Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct
ordering") correctly fixed a problem with using devm_ but missed
removing the LED entry from the LEDs list.
This cause kernel panic on specific scenario where the port for the PHY
is torn down and up and the kmod for the PHY is removed.
On setting the port down the first time, the assosiacted LEDs are
correctly unregistered. The associated kmod for the PHY is now removed.
The kmod is now added again and the port is now put up, the associated LED
are registered again.
On putting the port down again for the second time after these step, the
LED list now have 4 elements. With the first 2 already unregistered
previously and the 2 new one registered again.
This cause a kernel panic as the first 2 element should have been
removed.
Fix this by correctly removing the element when LED is unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
(cherry picked from commit 9dad21f910fcea2bdcff4af46159101d7f9cd8ba) |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the setting of the server responding flag
In afs_wait_for_operation(), we set transcribe the call responded flag to
the server record that we used after doing the fileserver iteration loop -
but it's possible to exit the loop having had a response from the server
that we've discarded (e.g. it returned an abort or we started receiving
data, but the call didn't complete).
This means that op->server might be NULL, but we don't check that before
attempting to set the server flag. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Increase array size of dummy_boolean
[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.
[HOW]
Increase dummy_boolean's array size to 3.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to don't panic system for no free segment fault injection
f2fs: fix to don't panic system for no free segment fault injection
syzbot reports a f2fs bug as below:
F2FS-fs (loop0): inject no free segment in get_new_segment of __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167
F2FS-fs (loop0): Stopped filesystem due to reason: 7
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2748!
CPU: 0 UID: 0 PID: 5109 Comm: syz-executor304 Not tainted 6.11.0-rc6-syzkaller-00363-g89f5e14d05b4 #0
RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline]
RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836
Call Trace:
__allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167
f2fs_allocate_new_section fs/f2fs/segment.c:3181 [inline]
f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3195
f2fs_expand_inode_data+0x5d6/0xbb0 fs/f2fs/file.c:1799
f2fs_fallocate+0x448/0x960 fs/f2fs/file.c:1903
vfs_fallocate+0x553/0x6c0 fs/open.c:334
do_vfs_ioctl+0x2592/0x2e50 fs/ioctl.c:886
__do_sys_ioctl fs/ioctl.c:905 [inline]
__se_sys_ioctl+0x81/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline]
RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836
The root cause is when we inject no free segment fault into f2fs,
we should not panic system, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, slub: avoid zeroing kmalloc redzone
Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra
allocated kmalloc space than requested"), setting orig_size treats
the wasted space (object_size - orig_size) as a redzone. However with
init_on_free=1 we clear the full object->size, including the redzone.
Additionally we clear the object metadata, including the stored orig_size,
making it zero, which makes check_object() treat the whole object as a
redzone.
These issues lead to the following BUG report with "slub_debug=FUZ
init_on_free=1":
[ 0.000000] =============================================================================
[ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten
[ 0.000000] -----------------------------------------------------------------------------
[ 0.000000]
[ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc
[ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc
[ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff)
[ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8
[ 0.000000]
[ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........
[ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........
[ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........
[ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144
[ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT)
[ 0.000000] Call trace:
[ 0.000000] dump_backtrace+0x90/0xe8
[ 0.000000] show_stack+0x18/0x24
[ 0.000000] dump_stack_lvl+0x74/0x8c
[ 0.000000] dump_stack+0x18/0x24
[ 0.000000] print_trailer+0x150/0x218
[ 0.000000] check_object+0xe4/0x454
[ 0.000000] free_to_partial_list+0x2f8/0x5ec
To address the issue, use orig_size to clear the used area. And restore
the value of orig_size after clear the remaining area.
When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns
s->object_size. So when using memset to init the area, the size can simply
be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not
enabled. And orig_size can never be bigger than object_size. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Use reserved copy engine for user binds on faulting devices
User binds map to engines with can fault, faults depend on user binds
completion, thus we can deadlock. Avoid this by using reserved copy
engine for user binds on faulting devices.
While we are here, normalize bind queue creation with a helper.
v2:
- Pass in extensions to bind queue creation (CI)
v3:
- s/resevered/reserved (Lucas)
- Fix NULL hwe check (Jonathan) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: use work queue to process beacon tx event
Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template")
from Feb 28, 2024 (linux-next), leads to the following Smatch static
checker warning:
drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie()
warn: sleeping in atomic context
The reason is that ath11k_bcn_tx_status_event() will directly call might
sleep function ath11k_wmi_cmd_send() during RCU read-side critical
sections. The call trace is like:
ath11k_bcn_tx_status_event()
-> rcu_read_lock()
-> ath11k_mac_bcn_tx_event()
-> ath11k_mac_setup_bcn_tmpl()
……
-> ath11k_wmi_bcn_tmpl()
-> ath11k_wmi_cmd_send()
-> rcu_read_unlock()
Commit 886433a98425 ("ath11k: add support for BSS color change") added the
ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning
of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock
to avoid warning but also introduced this BUG.
Use work queue to avoid directly calling ath11k_mac_bcn_tx_event()
during RCU critical sections. No need to worry about the deletion of vif
because cancel_work_sync() will drop the work if it doesn't start or
block vif deletion until the running work is done.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
Floating point instructions in userspace can crash some arm kernels
built with clang/LLD 17.0.6:
BUG: unsupported FP instruction in kernel mode
FPEXC == 0xc0000780
Internal error: Oops - undefined instruction: 0 [#1] ARM
CPU: 0 PID: 196 Comm: vfp-reproducer Not tainted 6.10.0 #1
Hardware name: BCM2835
PC is at vfp_support_entry+0xc8/0x2cc
LR is at do_undefinstr+0xa8/0x250
pc : [<c0101d50>] lr : [<c010a80c>] psr: a0000013
sp : dc8d1f68 ip : 60000013 fp : bedea19c
r10: ec532b17 r9 : 00000010 r8 : 0044766c
r7 : c0000780 r6 : ec532b17 r5 : c1c13800 r4 : dc8d1fb0
r3 : c10072c4 r2 : c0101c88 r1 : ec532b17 r0 : 0044766c
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 0251c008 DAC: 00000051
Register r0 information: non-paged memory
Register r1 information: vmalloc memory
Register r2 information: non-slab/vmalloc memory
Register r3 information: non-slab/vmalloc memory
Register r4 information: 2-page vmalloc region
Register r5 information: slab kmalloc-cg-2k
Register r6 information: vmalloc memory
Register r7 information: non-slab/vmalloc memory
Register r8 information: non-paged memory
Register r9 information: zero-size pointer
Register r10 information: vmalloc memory
Register r11 information: non-paged memory
Register r12 information: non-paged memory
Process vfp-reproducer (pid: 196, stack limit = 0x61aaaf8b)
Stack: (0xdc8d1f68 to 0xdc8d2000)
1f60: 0000081f b6f69300 0000000f c10073f4 c10072c4 dc8d1fb0
1f80: ec532b17 0c532b17 0044766c b6f9ccd8 00000000 c010a80c 00447670 60000010
1fa0: ffffffff c1c13800 00c5387d c0100f10 b6f68af8 00448fc0 00000000 bedea188
1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c
1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff 00000000 00000000
Call trace:
[<c0101d50>] (vfp_support_entry) from [<c010a80c>] (do_undefinstr+0xa8/0x250)
[<c010a80c>] (do_undefinstr) from [<c0100f10>] (__und_usr+0x70/0x80)
Exception stack(0xdc8d1fb0 to 0xdc8d1ff8)
1fa0: b6f68af8 00448fc0 00000000 bedea188
1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c
1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff
Code: 0a000061 e3877202 e594003c e3a09010 (eef16a10)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
This is a minimal userspace reproducer on a Raspberry Pi Zero W:
#include <stdio.h>
#include <math.h>
int main(void)
{
double v = 1.0;
printf("%fn", NAN + *(volatile double *)&v);
return 0;
}
Another way to consistently trigger the oops is:
calvin@raspberry-pi-zero-w ~$ python -c "import json"
The bug reproduces only when the kernel is built with DYNAMIC_DEBUG=n,
because the pr_debug() calls act as barriers even when not activated.
This is the output from the same kernel source built with the same
compiler and DYNAMIC_DEBUG=y, where the userspace reproducer works as
expected:
VFP: bounce: trigger ec532b17 fpexc c0000780
VFP: emulate: INST=0xee377b06 SCR=0x00000000
VFP: bounce: trigger eef1fa10 fpexc c0000780
VFP: emulate: INST=0xeeb40b40 SCR=0x00000000
VFP: raising exceptions 30000000
calvin@raspberry-pi-zero-w ~$ ./vfp-reproducer
nan
Crudely grepping for vmsr/vmrs instructions in the otherwise nearly
idential text for vfp_support_entry() makes the problem obvious:
vmlinux.llvm.good [0xc0101cb8] <+48>: vmrs r7, fpexc
vmlinux.llvm.good [0xc0101cd8] <+80>: vmsr fpexc, r0
vmlinux.llvm.good [0xc0101d20
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix oops on non-dbdc mt7986
mt7915_band_config() sets band_idx = 1 on the main phy for mt7986
with MT7975_ONE_ADIE or MT7976_ONE_ADIE.
Commit 0335c034e726 ("wifi: mt76: fix race condition related to
checking tx queue fill status") introduced a dereference of the
phys array indirectly indexed by band_idx via wcid->phy_idx in
mt76_wcid_cleanup(). This caused the following Oops on affected
mt7986 devices:
Unable to handle kernel read from unreadable memory at virtual address 0000000000000024
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000
[0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ...
CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0
Hardware name: ZyXEL EX5700 (Telenor) (DT)
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mt76_wcid_cleanup+0x84/0x22c [mt76]
lr : mt76_wcid_cleanup+0x64/0x22c [mt76]
sp : ffffffc00a803700
x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00
x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001
x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8
x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000
x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0
x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000
x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28
x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000
x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024
Call trace:
mt76_wcid_cleanup+0x84/0x22c [mt76]
__mt76_sta_remove+0x70/0xbc [mt76]
mt76_sta_state+0x8c/0x1a4 [mt76]
mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e]
drv_sta_state+0x144/0x274 [mac80211]
sta_info_move_state+0x1cc/0x2a4 [mac80211]
sta_set_sinfo+0xaf8/0xc24 [mac80211]
sta_info_destroy_addr_bss+0x4c/0x6c [mac80211]
ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211]
cfg80211_check_station_change+0x1360/0x4710 [cfg80211]
genl_family_rcv_msg_doit+0xb4/0x110
genl_rcv_msg+0xd0/0x1bc
netlink_rcv_skb+0x58/0x120
genl_rcv+0x34/0x50
netlink_unicast+0x1f0/0x2ec
netlink_sendmsg+0x198/0x3d0
____sys_sendmsg+0x1b0/0x210
___sys_sendmsg+0x80/0xf0
__sys_sendmsg+0x44/0xa0
__arm64_sys_sendmsg+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x40/0xd0
el0_svc+0x14/0x4c
el0t_64_sync_handler+0x100/0x110
el0t_64_sync+0x15c/0x160
Code: d2800002 910092c0 52800023 f9800011 (885f7c01)
---[ end trace 7e42dd9a39ed2281 ]---
Fix by using mt76_dev_phy() which will map band_idx to the correct phy
for all hardware combinations. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fail verification for sign-extension of packet data/data_end/data_meta
syzbot reported a kernel crash due to
commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses").
The reason is due to sign-extension of 32-bit load for
packet data/data_end/data_meta uapi field.
The original code looks like:
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */
r0 = r2
r0 += 8
if r3 > r0 goto +1
...
Note that __sk_buff->data load has 32-bit sign extension.
After verification and convert_ctx_accesses(), the final asm code looks like:
r2 = *(u64 *)(r1 +208)
r2 = (s32)r2
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
...
Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid
which may cause runtime failure.
Currently, in C code, typically we have
void *data = (void *)(long)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
and it will generate
r2 = *(u64 *)(r1 +208)
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
If we allow sign-extension,
void *data = (void *)(long)(int)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
the generated code looks like
r2 = *(u64 *)(r1 +208)
r2 <<= 32
r2 s>>= 32
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
and this will cause verification failure since "r2 <<= 32" is not allowed
as "r2" is a packet pointer.
To fix this issue for case
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
this patch added additional checking in is_valid_access() callback
function for packet data/data_end/data_meta access. If those accesses
are with sign-extenstion, the verification will fail.
[1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/ |
