| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is
used. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: rto_min/max: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: auth_enable: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: udp_port: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is
used. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix waker_bfqq UAF after bfq_split_bfqq()
Our syzkaller report a following UAF for v6.6:
BUG: KASAN: slab-use-after-free in bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958
Read of size 8 at addr ffff8881b57147d8 by task fsstress/232726
CPU: 2 PID: 232726 Comm: fsstress Not tainted 6.6.0-g3629d1885222 #39
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364
print_report+0x3e/0x70 mm/kasan/report.c:475
kasan_report+0xb8/0xf0 mm/kasan/report.c:588
hlist_add_head include/linux/list.h:1023 [inline]
bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958
bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271
bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323
blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660
blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143
__submit_bio+0xa0/0x6b0 block/blk-core.c:639
__submit_bio_noacct_mq block/blk-core.c:718 [inline]
submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747
submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847
__ext4_read_bh fs/ext4/super.c:205 [inline]
ext4_read_bh+0x15e/0x2e0 fs/ext4/super.c:230
__read_extent_tree_block+0x304/0x6f0 fs/ext4/extents.c:567
ext4_find_extent+0x479/0xd20 fs/ext4/extents.c:947
ext4_ext_map_blocks+0x1a3/0x2680 fs/ext4/extents.c:4182
ext4_map_blocks+0x929/0x15a0 fs/ext4/inode.c:660
ext4_iomap_begin_report+0x298/0x480 fs/ext4/inode.c:3569
iomap_iter+0x3dd/0x1010 fs/iomap/iter.c:91
iomap_fiemap+0x1f4/0x360 fs/iomap/fiemap.c:80
ext4_fiemap+0x181/0x210 fs/ext4/extents.c:5051
ioctl_fiemap.isra.0+0x1b4/0x290 fs/ioctl.c:220
do_vfs_ioctl+0x31c/0x11a0 fs/ioctl.c:811
__do_sys_ioctl fs/ioctl.c:869 [inline]
__se_sys_ioctl+0xae/0x190 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Allocated by task 232719:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:768 [inline]
slab_alloc_node mm/slub.c:3492 [inline]
kmem_cache_alloc_node+0x1b8/0x6f0 mm/slub.c:3537
bfq_get_queue+0x215/0x1f00 block/bfq-iosched.c:5869
bfq_get_bfqq_handle_split+0x167/0x5f0 block/bfq-iosched.c:6776
bfq_init_rq+0x13a4/0x17a0 block/bfq-iosched.c:6938
bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271
bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323
blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660
blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143
__submit_bio+0xa0/0x6b0 block/blk-core.c:639
__submit_bio_noacct_mq block/blk-core.c:718 [inline]
submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747
submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847
__ext4_read_bh fs/ext4/super.c:205 [inline]
ext4_read_bh_nowait+0x15a/0x240 fs/ext4/super.c:217
ext4_read_bh_lock+0xac/0xd0 fs/ext4/super.c:242
ext4_bread_batch+0x268/0x500 fs/ext4/inode.c:958
__ext4_find_entry+0x448/0x10f0 fs/ext4/namei.c:1671
ext4_lookup_entry fs/ext4/namei.c:1774 [inline]
ext4_lookup.part.0+0x359/0x6f0 fs/ext4/namei.c:1842
ext4_lookup+0x72/0x90 fs/ext4/namei.c:1839
__lookup_slow+0x257/0x480 fs/namei.c:1696
lookup_slow fs/namei.c:1713 [inline]
walk_component+0x454/0x5c0 fs/namei.c:2004
link_path_walk.part.0+0x773/0xda0 fs/namei.c:2331
link_path_walk fs/namei.c:3826 [inline]
path_openat+0x1b9/0x520 fs/namei.c:3826
do_filp_open+0x1b7/0x400 fs/namei.c:3857
do_sys_openat2+0x5dc/0x6e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x148/0x200 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_6
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
The blamed commit disabled hardware offoad of IPv6 packets with
extension headers on devices that advertise NETIF_F_IPV6_CSUM,
based on the definition of that feature in skbuff.h:
* * - %NETIF_F_IPV6_CSUM
* - Driver (device) is only able to checksum plain
* TCP or UDP packets over IPv6. These are specifically
* unencapsulated packets of the form IPv6|TCP or
* IPv6|UDP where the Next Header field in the IPv6
* header is either TCP or UDP. IPv6 extension headers
* are not supported with this feature. This feature
* cannot be set in features for a device with
* NETIF_F_HW_CSUM also set. This feature is being
* DEPRECATED (see below).
The change causes skb_warn_bad_offload to fire for BIG TCP
packets.
[ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0
[ 496.310297] ? skb_warn_bad_offload+0xc4/0xe0
[ 496.310300] skb_checksum_help+0x129/0x1f0
[ 496.310303] skb_csum_hwoffload_help+0x150/0x1b0
[ 496.310306] validate_xmit_skb+0x159/0x270
[ 496.310309] validate_xmit_skb_list+0x41/0x70
[ 496.310312] sch_direct_xmit+0x5c/0x250
[ 496.310317] __qdisc_run+0x388/0x620
BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to
communicate packet length, as this is an IPv6 jumbogram. But, the
feature is only enabled on devices that support BIG TCP TSO. The
header is only present for PF_PACKET taps like tcpdump, and not
transmitted by physical devices.
For this specific case of extension headers that are not
transmitted, return to the situation before the blamed commit
and support hardware offload.
ipv6_has_hopopt_jumbo() tests not only whether this header is present,
but also that it is the only extension header before a terminal (L4)
header. |
| In the Linux kernel, the following vulnerability has been resolved:
hrtimers: Handle CPU state correctly on hotplug
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ] |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity()
The following call-chain leads to enabling interrupts in a nested interrupt
disabled section:
irq_set_vcpu_affinity()
irq_get_desc_lock()
raw_spin_lock_irqsave() <--- Disable interrupts
its_irq_set_vcpu_affinity()
guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard()
irq_put_desc_unlock() <--- Warns because interrupts are enabled
This was broken in commit b97e8a2f7130, which replaced the original
raw_spin_[un]lock() pair with guard(raw_spinlock_irq).
Fix the issue by using guard(raw_spinlock).
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-blk: don't keep queue frozen during system suspend
Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.
block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().
[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/
Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix the infinite loop in exfat_readdir()
If the file system is corrupted so that a cluster is linked to
itself in the cluster chain, and there is an unused directory
entry in the cluster, 'dentry' will not be incremented, causing
condition 'dentry < max_dentries' unable to prevent an infinite
loop.
This infinite loop causes s_lock not to be released, and other
tasks will hang, such as exfat_sync_fs().
This commit stops traversing the cluster chain when there is unused
directory entry in the cluster to avoid this infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix sleeping in invalid context in die()
die() can be called in exception handler, and therefore cannot sleep.
However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled.
That causes the following warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex
preempt_count: 110001, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
dump_backtrace+0x1c/0x24
show_stack+0x2c/0x38
dump_stack_lvl+0x5a/0x72
dump_stack+0x14/0x1c
__might_resched+0x130/0x13a
rt_spin_lock+0x2a/0x5c
die+0x24/0x112
do_trap_insn_illegal+0xa0/0xea
_new_vmalloc_restore_context_a0+0xcc/0xd8
Oops - illegal instruction [#1]
Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT
enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sctp: Prevent autoclose integer overflow in sctp_association_init()
While by default max_autoclose equals to INT_MAX / HZ, one may set
net.sctp.max_autoclose to UINT_MAX. There is code in
sctp_association_init() that can consequently trigger overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: ignore unknown extended permissions
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Have process_string() also allow arrays
In order to catch a common bug where a TRACE_EVENT() TP_fast_assign()
assigns an address of an allocated string to the ring buffer and then
references it in TP_printk(), which can be executed hours later when the
string is free, the function test_event_printk() runs on all events as
they are registered to make sure there's no unwanted dereferencing.
It calls process_string() to handle cases in TP_printk() format that has
"%s". It returns whether or not the string is safe. But it can have some
false positives.
For instance, xe_bo_move() has:
TP_printk("move_lacks_source:%s, migrate object %p [size %zu] from %s to %s device_id:%s",
__entry->move_lacks_source ? "yes" : "no", __entry->bo, __entry->size,
xe_mem_type_to_name[__entry->old_placement],
xe_mem_type_to_name[__entry->new_placement], __get_str(device_id))
Where the "%s" references into xe_mem_type_to_name[]. This is an array of
pointers that should be safe for the event to access. Instead of flagging
this as a bad reference, if a reference points to an array, where the
record field is the index, consider it safe. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
When dm_bm_read_lock() fails due to locking or checksum errors, it
releases the faulty block implicitly while leaving an invalid output
pointer behind. The caller of dm_bm_read_lock() should not operate on
this invalid dm_block pointer, or it will lead to undefined result.
For example, the dm_array_cursor incorrectly caches the invalid pointer
on reading a faulty array block, causing a double release in
dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put().
Reproduce steps:
1. initialize a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. wipe the second array block offline
dmsteup remove cache cmeta cdata corig
mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \
2>/dev/null | hexdump -e '1/8 "%u\n"')
ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \
2>/dev/null | hexdump -e '1/8 "%u\n"')
dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock
3. try reopen the cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
device-mapper: array: array_block_check failed: blocknr 0 != wanted 10
device-mapper: block manager: array validator check failed for block 10
device-mapper: array: get_ablock failed
device-mapper: cache metadata: dm_array_cursor_next for mapping failed
------------[ cut here ]------------
kernel BUG at drivers/md/dm-bufio.c:638!
Fix by setting the cached block pointer to NULL on errors.
In addition to the reproducer described above, this fix can be
verified using the "array_cursor/damaged" test in dm-unit:
dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix a missing return value check bug
In the smb2_send_interim_resp(), if ksmbd_alloc_work_struct()
fails to allocate a node, it returns a NULL pointer to the
in_work pointer. This can lead to an illegal memory write of
in_work->response_buf when allocate_interim_rsp_buf() attempts
to perform a kzalloc() on it.
To address this issue, incorporating a check for the return
value of ksmbd_alloc_work_struct() ensures that the function
returns immediately upon allocation failure, thereby preventing
the aforementioned illegal memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add check for granularity in dml ceil/floor helpers
[Why]
Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2()
should check for granularity is non zero to avoid assert and
divide-by-zero error in dcn_bw_ functions.
[How]
Add check for granularity 0.
(cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec) |
| In the Linux kernel, the following vulnerability has been resolved:
topology: Keep the cpumask unchanged when printing cpumap
During fuzz testing, the following warning was discovered:
different return values (15 and 11) from vsnprintf("%*pbl
", ...)
test:keyward is WARNING in kvasprintf
WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130
Call Trace:
kvasprintf+0x121/0x130
kasprintf+0xa6/0xe0
bitmap_print_to_buf+0x89/0x100
core_siblings_list_read+0x7e/0xb0
kernfs_file_read_iter+0x15b/0x270
new_sync_read+0x153/0x260
vfs_read+0x215/0x290
ksys_read+0xb9/0x160
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The call trace shows that kvasprintf() reported this warning during the
printing of core_siblings_list. kvasprintf() has several steps:
(1) First, calculate the length of the resulting formatted string.
(2) Allocate a buffer based on the returned length.
(3) Then, perform the actual string formatting.
(4) Check whether the lengths of the formatted strings returned in
steps (1) and (2) are consistent.
If the core_cpumask is modified between steps (1) and (3), the lengths
obtained in these two steps may not match. Indeed our test includes cpu
hotplugging, which should modify core_cpumask while printing.
To fix this issue, cache the cpumask into a temporary variable before
calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged
during the printing process. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
Resolve kernel panic caused by improper handling of IRQs while
accessing GPIO values. This is done by replacing generic_handle_irq with
handle_nested_irq. |
