| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer overflow vulnerability in the yuv2ya16_X_c_template function in libswscale/output.c in FFmpeg 8.0. |
| NSF Unidata NetCDF-C NC Variable Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NSF Unidata NetCDF-C. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of NC variables. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27266. |
| Integer overflow or wraparound in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in Windows SPNEGO Extended Negotiation allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in Windows Routing and Remote Access Service (RRAS) allows an unauthorized attacker to execute code over a network. |
| A heap-based buffer overflow vulnerability exists in the PDF parsing of Foxit PDF Reader when processing specially crafted JBIG2 data. An integer overflow in the calculation of the image buffer size may occur, potentially allowing a remote attacker to execute arbitrary code. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix signed integer overflow in __ip6_append_data
Resurrect ubsan overflow checks and ubsan report this warning,
fix it by change the variable [length] type to size_t.
UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19
2147479552 + 8567 cannot be represented in type 'int'
CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x214/0x230
show_stack+0x30/0x78
dump_stack_lvl+0xf8/0x118
dump_stack+0x18/0x30
ubsan_epilogue+0x18/0x60
handle_overflow+0xd0/0xf0
__ubsan_handle_add_overflow+0x34/0x44
__ip6_append_data.isra.48+0x1598/0x1688
ip6_append_data+0x128/0x260
udpv6_sendmsg+0x680/0xdd0
inet6_sendmsg+0x54/0x90
sock_sendmsg+0x70/0x88
____sys_sendmsg+0xe8/0x368
___sys_sendmsg+0x98/0xe0
__sys_sendmmsg+0xf4/0x3b8
__arm64_sys_sendmmsg+0x34/0x48
invoke_syscall+0x64/0x160
el0_svc_common.constprop.4+0x124/0x300
do_el0_svc+0x44/0xc8
el0_svc+0x3c/0x1e8
el0t_64_sync_handler+0x88/0xb0
el0t_64_sync+0x16c/0x170
Changes since v1:
-Change the variable [length] type to unsigned, as Eric Dumazet suggested.
Changes since v2:
-Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested.
Changes since v3:
-Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as
Jakub Kicinski suggested. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: prevent integer overflow on 32 bit systems
On a 32 bit system, the "len * sizeof(*p)" operation can have an
integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix qgroup reserve overflow the qgroup limit
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.
Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M. For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.
The following example test script reproduces the problem:
$ cat qgroup-overflow.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Set qgroup limit to 2GiB.
btrfs quota enable $MNT
btrfs qgroup limit 2G $MNT
# Try to fallocate a 3GiB file. This should fail.
echo
echo "Try to fallocate a 3GiB file..."
fallocate -l 3G $MNT/3G.file
# Try to fallocate a 5GiB file.
echo
echo "Try to fallocate a 5GiB file..."
fallocate -l 5G $MNT/5G.file
# See we break the qgroup limit.
echo
sync
btrfs qgroup show -r $MNT
umount $MNT
When running the test:
$ ./qgroup-overflow.sh
(...)
Try to fallocate a 3GiB file...
fallocate: fallocate failed: Disk quota exceeded
Try to fallocate a 5GiB file...
qgroupid rfer excl max_rfer
-------- ---- ---- --------
0/5 5.00GiB 5.00GiB 2.00GiB
Since we have no control of how bytes_changed is used, it's better to
set it to u64. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix u8 overflow
By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases
multiple times and eventually it will wrap around the maximum number
(i.e., 255).
This patch prevents this by adding a boundary check with
L2CAP_MAX_CONF_RSP
Btmon log:
Bluetooth monitor ver 5.64
= Note: Linux version 6.1.0-rc2 (x86_64) 0.264594
= Note: Bluetooth subsystem version 2.22 0.264636
@ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191
= New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604
@ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741
= Open Index: 00:00:00:00:00:00 [hci0] 13.900426
(...)
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106
invalid packet size (12 != 1033)
08 00 01 00 02 01 04 00 01 10 ff ff ............
> ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561
invalid packet size (14 != 1547)
0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@.....
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@.......
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@.......
= bluetoothd: Bluetooth daemon 5.43 14.401828
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753
invalid packet size (12 != 1033)
08 00 01 00 04 01 04 00 40 00 00 00 ........@... |
| In the Linux kernel, the following vulnerability has been resolved:
CDC-NCM: avoid overflow in sanity checking
A broken device may give an extreme offset like 0xFFF0
and a reasonable length for a fragment. In the sanity
check as formulated now, this will create an integer
overflow, defeating the sanity check. Both offset
and offset + len need to be checked in such a manner
that no overflow can occur.
And those quantities should be unsigned. |
| A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. |
| Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.6 and below, the SYSTEM-level service SbieSvc.exe exposes SbieIniServer::RC4Crypt to sandboxed processes. The handler adds a fixed header size to a caller-controlled value_len without overflow checking. A large value_len (e.g., 0xFFFFFFF0) wraps the allocation size, causing a heap overflow when attacker data is copied into the undersized buffer. This allows sandboxed processes to execute arbitrary code as SYSTEM, fully compromising the host. This issue is fixed in version 1.16.7. |
| Malwarebytes 1.0.14 for Linux doesn't properly compute signatures in some scenarios. This allows a bypass of detection. |
| A flaw was found in libssh2 before 1.8.1 creating a vulnerability on the SSH client side. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used by the SSH client as an index to copy memory causing in an out of bounds memory write error. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: reject invalid perturb period
Gerrard Tai reported that SFQ perturb_period has no range check yet,
and this can be used to trigger a race condition fixed in a separate patch.
We want to make sure ctl->perturb_period * HZ will not overflow
and is positive.
tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: inline: fix len overflow in ext4_prepare_inline_data
When running the following code on an ext4 filesystem with inline_data
feature enabled, it will lead to the bug below.
fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666);
ftruncate(fd, 30);
pwrite(fd, "a", 1, (1UL << 40) + 5UL);
That happens because write_begin will succeed as when
ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len
will be truncated, leading to ext4_prepare_inline_data parameter to be 6
instead of 0x10000000006.
Then, later when write_end is called, we hit:
BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
at ext4_write_inline_data.
Fix it by using a loff_t type for the len parameter in
ext4_prepare_inline_data instead of an unsigned int.
[ 44.545164] ------------[ cut here ]------------
[ 44.545530] kernel BUG at fs/ext4/inline.c:240!
[ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb
[ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100
[ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49
[ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216
[ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006
[ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738
[ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000
[ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738
[ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000
[ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0
[ 44.546523] PKRU: 55555554
[ 44.546523] Call Trace:
[ 44.546523] <TASK>
[ 44.546523] ext4_write_inline_data_end+0x126/0x2d0
[ 44.546523] generic_perform_write+0x17e/0x270
[ 44.546523] ext4_buffered_write_iter+0xc8/0x170
[ 44.546523] vfs_write+0x2be/0x3e0
[ 44.546523] __x64_sys_pwrite64+0x6d/0xc0
[ 44.546523] do_syscall_64+0x6a/0xf0
[ 44.546523] ? __wake_up+0x89/0xb0
[ 44.546523] ? xas_find+0x72/0x1c0
[ 44.546523] ? next_uptodate_folio+0x317/0x330
[ 44.546523] ? set_pte_range+0x1a6/0x270
[ 44.546523] ? filemap_map_pages+0x6ee/0x840
[ 44.546523] ? ext4_setattr+0x2fa/0x750
[ 44.546523] ? do_pte_missing+0x128/0xf70
[ 44.546523] ? security_inode_post_setattr+0x3e/0xd0
[ 44.546523] ? ___pte_offset_map+0x19/0x100
[ 44.546523] ? handle_mm_fault+0x721/0xa10
[ 44.546523] ? do_user_addr_fault+0x197/0x730
[ 44.546523] ? do_syscall_64+0x76/0xf0
[ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60
[ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90
[ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d
[ 44.546523] RIP: 0033:0x7f42999c6687
[ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
[ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012
[ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687
[ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003
[ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000
[ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000
---truncated--- |
| Apache HTTP Server 2.4.53 and earlier may crash or disclose information due to a read beyond bounds in ap_strcmp_match() when provided with an extremely large input buffer. While no code distributed with the server can be coerced into such a call, third-party modules or lua scripts that use ap_strcmp_match() may hypothetically be affected. |
