| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Receipt of specially crafted UDP/IP packets over MPLS may be able to bypass a stateless firewall filter. The crafted UDP packets must be encapsulated and meet a very specific packet format to be classified in a way that bypasses IP firewall filter rules. The packets themselves do not cause a service interruption (e.g. RPD crash), but receipt of a high rate of UDP packets may be able to contribute to a denial of service attack. This issue only affects processing of transit UDP/IP packets over MPLS, received on an interface with MPLS enabled. TCP packet processing and non-MPLS encapsulated UDP packet processing are unaffected by this issue. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D76; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1F6-S10, 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D67 on QFX10K; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D100; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.1 versions prior to 18.1R2; 18.2X75 versions prior to 18.2X75-D5. |
| Receipt of a specific MPLS packet may cause MPC7/8/9, PTX-FPC3 (FPC-P1, FPC-P2) line cards or PTX1K to crash and restart. By continuously sending specific MPLS packets, an attacker can repeatedly crash the line cards or PTX1K causing a sustained Denial of Service. Affected releases are Juniper Networks Junos OS with MPC7/8/9 or PTX-FPC3 (FPC-P1, FPC-P2) installed and PTX1K: 15.1F versions prior to 15.1F6-S10; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D46; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S4, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D70, 17.2X75-D90; 17.3 versions prior to 17.3R1-S4, 17.3R2, 17.4 versions prior to 17.4R1-S2, 17.4R2. Refer to KB25385 for more information about PFE line cards. |
| While experiencing a broadcast storm, placing the fxp0 interface into promiscuous mode via the 'monitor traffic interface fxp0' can cause the system to crash and restart (vmcore). This issue only affects Junos OS 15.1 and later releases, and affects both single core and multi-core REs. Releases prior to Junos OS 15.1 are unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1F6-S11, 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D67 on QFX10K; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX; 16.1 versions prior to 16.1R3-S8, 16.1R5-S4, 16.1R6-S1, 16.1R7; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D90, 17.2X75-D110; 17.3 versions prior to 17.3R1-S4, 17.3R2; 17.4 versions prior to 17.4R1-S3, 17.4R2. |
| A Junos device with VPLS routing-instances configured on one or more interfaces may be susceptible to an mbuf leak when processing a specific MPLS packet. Approximately 1 mbuf is leaked per each packet processed. The number of mbufs is platform dependent. The following command provides the number of mbufs that are currently in use and maximum number of mbufs that can be allocated on a platform: > show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs it will become inaccessible and a restart will be required. This issue only affects end devices, transit devices are not affected. Affected releases are Juniper Networks Junos OS with VPLS configured running: 12.1X46 versions prior to 12.1X46-D76; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F2-S19, 15.1F6-S10, 15.1R4-S9, 15.1R5-S7, 15.1R6-S4, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 15.1X53 versions prior to 15.1X53-D66 on QFX10; 16.1 versions prior to 16.1R3-S8, 16.1R4-S6, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S6, 17.1R3; 17.2 versions prior to 17.2R1-S5, 17.2R2. |
| A sustained sequence of different types of normal transit traffic can trigger a high CPU consumption denial of service condition in the Junos OS register and schedule software interrupt handler subsystem when a specific command is issued to the device. This affects one or more threads and conversely one or more running processes running on the system. Once this occurs, the high CPU event(s) affects either or both the forwarding and control plane. As a result of this condition the device can become inaccessible in either or both the control and forwarding plane and stops forwarding traffic until the device is rebooted. The issue will reoccur after reboot upon receiving further transit traffic. Score: 5.7 MEDIUM (CVSS:3.0/AV:A/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) For network designs utilizing layer 3 forwarding agents or other ARP through layer 3 technologies, the score is slightly higher. Score: 6.5 MEDIUM (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) If the following entry exists in the RE message logs then this may indicate the issue is present. This entry may or may not appear when this issue occurs. /kernel: Expensive timeout(9) function: Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D50; 12.3X48 versions prior to 12.3X48-D30; 12.3R versions prior to 12.3R12-S7; 14.1 versions prior to 14.1R8-S4, 14.1R9; 14.1X53 versions prior to 14.1X53-D30, 14.1X53-D34; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F6, 15.1R3; 15.1X49 versions prior to 15.1X49-D40; 15.1X53 versions prior to 15.1X53-D31, 15.1X53-D33, 15.1X53-D60. No other Juniper Networks products or platforms are affected by this issue. |
| The read_packet function in knc (Kerberised NetCat) before 1.11-1 is vulnerable to denial of service (memory exhaustion) that can be exploited remotely without authentication, possibly affecting another services running on the targeted host. |
| PHP 7.1.5 has an Out of bounds access in php_pcre_replace_impl via a crafted preg_replace call. |
| An issue was discovered in adns before 1.5.2. It hangs, eating CPU, if a compression pointer loop is encountered. |
| In Eclipse Mosquitto 1.4.15 and earlier, a Memory Leak vulnerability was found within the Mosquitto Broker. Unauthenticated clients can send crafted CONNECT packets which could cause a denial of service in the Mosquitto Broker. |
| In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol. |
| An error in the "read_metadata_vorbiscomment_()" function (src/libFLAC/stream_decoder.c) in FLAC version 1.3.2 can be exploited to cause a memory leak via a specially crafted FLAC file. |
| The Supervisor in Sandstorm doesn't set and enforce the resource limits of a process. This allows remote attackers to cause a denial of service by launching a fork bomb in the sandbox, or by using a large amount of disk space. |
| Features in F5 BIG-IP 13.0.0-13.1.0.3, 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1 system that utilizes inflate functionality directly, via an iRule, or via the inflate code from PEM module are subjected to a service disruption via a "Zip Bomb" attack. |
| Firmware in the Intel Puma 5, 6, and 7 Series might experience resource depletion or timeout, which allows a network attacker to create a denial of service via crafted network traffic. |
| An unprivileged attacker with connectivity to the IMM2 could cause a denial of service attack on the IMM2 (Versions earlier than 4.4 for Lenovo System x and earlier than 6.4 for IBM System x). Flooding the IMM2 with a high volume of authentication failures via the Common Information Model (CIM) used by LXCA and OneCLI and other tools can exhaust available system memory which can cause the IMM2 to reboot itself until the requests cease. |
| A vulnerability stemming from failure to properly clean up closed OMAPI connections can lead to exhaustion of the pool of socket descriptors available to the DHCP server. Affects ISC DHCP 4.1.0 to 4.1-ESV-R15, 4.2.0 to 4.2.8, 4.3.0 to 4.3.6. Older versions may also be affected but are well beyond their end-of-life (EOL). Releases prior to 4.1.0 have not been tested. |
| If named is configured to use Response Policy Zones (RPZ) an error processing some rule types can lead to a condition where BIND will endlessly loop while handling a query. Affects BIND 9.9.10, 9.10.5, 9.11.0->9.11.1, 9.9.10-S1, 9.10.5-S1. |
| A vulnerability, which was classified as problematic, was found in WEKA INTEREST Security Scanner up to 1.8. This affects an unknown part of the component LAN Viewer. The manipulation with an unknown input leads to denial of service. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer |
| A vulnerability, which was classified as problematic, has been found in WEKA INTEREST Security Scanner up to 1.8. Affected by this issue is some unknown functionality of the component Webspider. The manipulation with an unknown input leads to denial of service. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer |
| A vulnerability classified as problematic was found in WEKA INTEREST Security Scanner up to 1.8. Affected by this vulnerability is the Stresstest Configuration Handler. A manipulation leads to a local denial of service. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer |
