| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
um: init cpu_tasks[] earlier
This is currently done in uml_finishsetup(), but e.g. with
KCOV enabled we'll crash because some init code can call
into e.g. memparse(), which has coverage annotations, and
then the checks in check_kcov_mode() crash because current
is NULL.
Simply initialize the cpu_tasks[] array statically, which
fixes the crash. For the later SMP work, it seems to have
not really caused any problems yet, but initialize all of
the entries anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make decode_pool() more resilient against corrupted osdmaps
If the osdmap is (maliciously) corrupted such that the encoded length
of ceph_pg_pool envelope is less than what is expected for a particular
encoding version, out-of-bounds reads may ensue because the only bounds
check that is there is based on that length value.
This patch adds explicit bounds checks for each field that is decoded
or skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf
A zero length gss_token results in pages == 0 and in_token->pages[0]
is NULL. The code unconditionally evaluates
page_address(in_token->pages[0]) for the initial memcpy, which can
dereference NULL even when the copy length is 0. Guard the first
memcpy so it only runs when length > 0. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Do not reprogram affinitiy on ASP chip
The ASP chip is a very old variant of the GSP chip and is used e.g. in
HP 730 workstations. When trying to reprogram the affinity it will crash
with a HPMC as the relevant registers don't seem to be at the usual
location. Let's avoid the crash by checking the sversion. Also note,
that reprogramming isn't necessary either, as the HP730 is a just a
single-CPU machine. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
syzkaller found it could overflow math in the test infrastructure and
cause a WARN_ON by corrupting the reserved interval tree. This only
effects test kernels with CONFIG_IOMMUFD_TEST.
Validate the user input length in the test ioctl. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix string copying in parse_apply_sb_mount_options()
strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-term
string of possibly bigger size. Commit 0efc5990bca5 ("string.h: Introduce
memtostr() and memtostr_pad()") provides additional information in that
regard. So if this happens, the following warning is observed:
strnlen: detected buffer overflow: 65 byte read of buffer size 64
WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Modules linked in:
CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Call Trace:
<TASK>
__fortify_panic+0x1f/0x30 lib/string_helpers.c:1039
strnlen include/linux/fortify-string.h:235 [inline]
sized_strscpy include/linux/fortify-string.h:309 [inline]
parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline]
__ext4_fill_super fs/ext4/super.c:5261 [inline]
ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706
get_tree_bdev_flags+0x387/0x620 fs/super.c:1636
vfs_get_tree+0x93/0x380 fs/super.c:1814
do_new_mount fs/namespace.c:3553 [inline]
path_mount+0x6ae/0x1f70 fs/namespace.c:3880
do_mount fs/namespace.c:3893 [inline]
__do_sys_mount fs/namespace.c:4103 [inline]
__se_sys_mount fs/namespace.c:4080 [inline]
__x64_sys_mount+0x280/0x300 fs/namespace.c:4080
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Since userspace is expected to provide s_mount_opts field to be at most 63
characters long with the ending byte being NUL-term, use a 64-byte buffer
which matches the size of s_mount_opts, so that strscpy_pad() does its job
properly. Return with error if the user still managed to provide a
non-NUL-term string here.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Discard Beacon frames to non-broadcast address
Beacon frames are required to be sent to the broadcast address, see IEEE
Std 802.11-2020, 11.1.3.1 ("The Address 1 field of the Beacon .. frame
shall be set to the broadcast address"). A unicast Beacon frame might be
used as a targeted attack to get one of the associated STAs to do
something (e.g., using CSA to move it to another channel). As such, it
is better have strict filtering for this on the received side and
discard all Beacon frames that are sent to an unexpected address.
This is even more important for cases where beacon protection is used.
The current implementation in mac80211 is correctly discarding unicast
Beacon frames if the Protected Frame bit in the Frame Control field is
set to 0. However, if that bit is set to 1, the logic used for checking
for configured BIGTK(s) does not actually work. If the driver does not
have logic for dropping unicast Beacon frames with Protected Frame bit
1, these frames would be accepted in mac80211 processing as valid Beacon
frames even though they are not protected. This would allow beacon
protection to be bypassed. While the logic for checking beacon
protection could be extended to cover this corner case, a more generic
check for discard all Beacon frames based on A1=unicast address covers
this without needing additional changes.
Address all these issues by dropping received Beacon frames if they are
sent to a non-broadcast address. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Sign extend kfunc call arguments
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt()
The variable mddev->private is first assigned to conf and then checked:
conf = mddev->private;
if (!conf) ...
If conf is NULL, then mddev->private is also NULL. In this case,
null-pointer dereferences can occur when calling raid5_quiesce():
raid5_quiesce(mddev, true);
raid5_quiesce(mddev, false);
since mddev->private is assigned to conf again in raid5_quiesce(), and conf
is dereferenced in several places, for example:
conf->quiesce = 0;
wake_up(&conf->wait_for_quiescent);
To fix this issue, the function should unlock mddev and return before
invoking raid5_quiesce() when conf is NULL, following the existing pattern
in raid5_change_consistency_policy(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"
This patch ensures that the RX ring size (rx_pending) is not
set below the permitted length. This avoids UBSAN
shift-out-of-bounds errors when users passes small or zero
ring sizes via ethtool -G. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add missing NULL pointer check for pingpong interface
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Patchwork: https://patchwork.freedesktop.org/patch/693860/ |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Use spinlock for context list protection lock
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuset: fix warning when disabling remote partition
A warning was triggered as follows:
WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110
RIP: 0010:remote_partition_disable+0xf7/0x110
RSP: 0018:ffffc90001947d88 EFLAGS: 00000206
RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40
RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000
RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8
R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0
Call Trace:
<TASK>
update_prstate+0x2d3/0x580
cpuset_partition_write+0x94/0xf0
kernfs_fop_write_iter+0x147/0x200
vfs_write+0x35d/0x500
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f55c8cd4887
Reproduction steps (on a 16-CPU machine):
# cd /sys/fs/cgroup/
# mkdir A1
# echo +cpuset > A1/cgroup.subtree_control
# echo "0-14" > A1/cpuset.cpus.exclusive
# mkdir A1/A2
# echo "0-14" > A1/A2/cpuset.cpus.exclusive
# echo "root" > A1/A2/cpuset.cpus.partition
# echo 0 > /sys/devices/system/cpu/cpu15/online
# echo member > A1/A2/cpuset.cpus.partition
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: exynos-clkout: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning. |
| The vulnerability exists in BLUVOYIX due to improper authentication in the BLUVOYIX admin APIs. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable admin API to create a new user with admin privileges. Successful exploitation of this vulnerability could allow the attacker to gain full access to customers' data and completely compromise the targeted platform by logging in to the newly-created admin user. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Handle incorrect num_connectors capability
The UCSI spec states that the num_connectors field is 7 bits, and the
8th bit is reserved and should be set to zero.
Some buggy FW has been known to set this bit, and it can lead to a
system not booting.
Flag that the FW is not behaving correctly, and auto-fix the value
so that the system boots correctly.
Found on Lenovo P1 G8 during Linux enablement program. The FW will
be fixed, but seemed worth addressing in case it hit platforms that
aren't officially Linux supported. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - zero initialize memory allocated via sock_kmalloc
Several crypto user API contexts and requests allocated with
sock_kmalloc() were left uninitialized, relying on callers to
set fields explicitly. This resulted in the use of uninitialized
data in certain error paths or when new fields are added in the
future.
The ACVP patches also contain two user-space interface files:
algif_kpp.c and algif_akcipher.c. These too rely on proper
initialization of their context structures.
A particular issue has been observed with the newly added
'inflight' variable introduced in af_alg_ctx by commit:
67b164a871af ("crypto: af_alg - Disallow multiple in-flight AIO requests")
Because the context is not memset to zero after allocation,
the inflight variable has contained garbage values. As a result,
af_alg_alloc_areq() has incorrectly returned -EBUSY randomly when
the garbage value was interpreted as true:
https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209
The check directly tests ctx->inflight without explicitly
comparing against true/false. Since inflight is only ever set to
true or false later, an uninitialized value has triggered
-EBUSY failures. Zero-initializing memory allocated with
sock_kmalloc() ensures inflight and other fields start in a known
state, removing random issues caused by uninitialized data. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Avoid walking the Namespace if start_node is NULL
Although commit 0c9992315e73 ("ACPICA: Avoid walking the ACPI Namespace
if it is not there") fixed the situation when both start_node and
acpi_gbl_root_node are NULL, the Linux kernel mainline now still crashed
on Honor Magicbook 14 Pro [1].
That happens due to the access to the member of parent_node in
acpi_ns_get_next_node(). The NULL pointer dereference will always
happen, no matter whether or not the start_node is equal to
ACPI_ROOT_OBJECT, so move the check of start_node being NULL
out of the if block.
Unfortunately, all the attempts to contact Honor have failed, they
refused to provide any technical support for Linux.
The bad DSDT table's dump could be found on GitHub [2].
DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025
[ rjw: Subject adjustment, changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kexec: Enable SMT before waking offline CPUs
If SMT is disabled or a partial SMT state is enabled, when a new kernel
image is loaded for kexec, on reboot the following warning is observed:
kexec: Waking offline cpu 228.
WARNING: CPU: 0 PID: 9062 at arch/powerpc/kexec/core_64.c:223 kexec_prepare_cpus+0x1b0/0x1bc
[snip]
NIP kexec_prepare_cpus+0x1b0/0x1bc
LR kexec_prepare_cpus+0x1a0/0x1bc
Call Trace:
kexec_prepare_cpus+0x1a0/0x1bc (unreliable)
default_machine_kexec+0x160/0x19c
machine_kexec+0x80/0x88
kernel_kexec+0xd0/0x118
__do_sys_reboot+0x210/0x2c4
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
This occurs as add_cpu() fails due to cpu_bootable() returning false for
CPUs that fail the cpu_smt_thread_allowed() check or non primary
threads if SMT is disabled.
Fix the issue by enabling SMT and resetting the number of SMT threads to
the number of threads per core, before attempting to wake up all present
CPUs. |
