| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix data corruption after conversion from inline format
Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in
block_write_full_page()") uncovered a latent bug in ocfs2 conversion
from inline inode format to a normal inode format.
The code in ocfs2_convert_inline_data_to_extents() attempts to zero out
the whole cluster allocated for file data by grabbing, zeroing, and
dirtying all pages covering this cluster. However these pages are
beyond i_size, thus writeback code generally ignores these dirty pages
and no blocks were ever actually zeroed on the disk.
This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero
pages past i_size.") for standard ocfs2 write path, inline conversion
path was apparently forgotten; the commit log also has a reasoning why
the zeroing actually is not needed.
After commit 6dbf7bb55598, things became worse as writeback code stopped
invalidating buffers on pages beyond i_size and thus these pages end up
with clean PageDirty bit but with buffers attached to these pages being
still dirty. So when a file is converted from inline format, then
writeback triggers, and then the file is grown so that these pages
become valid, the invalid dirtiness state is preserved,
mark_buffer_dirty() does nothing on these pages (buffers are already
dirty) but page is never written back because it is clean. So data
written to these pages is lost once pages are reclaimed.
Simple reproducer for the problem is:
xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \
-c "pwrite 4000 2000" ocfs2_file
After unmounting and mounting the fs again, you can observe that end of
'ocfs2_file' has lost its contents.
Fix the problem by not doing the pointless zeroing during conversion
from inline format similarly as in the standard write path.
[akpm@linux-foundation.org: fix whitespace, per Joseph] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix host stage-2 PGD refcount
The KVM page-table library refcounts the pages of concatenated stage-2
PGDs individually. However, when running KVM in protected mode, the
host's stage-2 PGD is currently managed by EL2 as a single high-order
compound page, which can cause the refcount of the tail pages to reach 0
when they shouldn't, hence corrupting the page-table.
Fix this by introducing a new hyp_split_page() helper in the EL2 page
allocator (matching the kernel's split_page() function), and make use of
it from host_s2_zalloc_pages_exact(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix gart.bo pin_count leak
gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix netdev refcount issue
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:
[ 80.884935] ref_tracker: reference already released.
[ 80.885150] ref_tracker: allocated in:
[ 80.885349] ax25_dev_device_up+0x105/0x540
[ 80.885730] ax25_device_event+0xa4/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] __dev_notify_flags+0x138/0x280
[ 80.885730] dev_change_flags+0xd7/0x180
[ 80.885730] dev_ifsioc+0x6a9/0xa30
[ 80.885730] dev_ioctl+0x4d8/0xd90
[ 80.885730] sock_do_ioctl+0x1c2/0x2d0
[ 80.885730] sock_ioctl+0x38b/0x4f0
[ 80.885730] __se_sys_ioctl+0xad/0xf0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.885730] ref_tracker: freed in:
[ 80.885730] ax25_device_event+0x272/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] dev_close_many+0x272/0x370
[ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180
[ 80.885730] unregister_netdev+0xcf/0x120
[ 80.885730] sixpack_close+0x11f/0x1b0
[ 80.885730] tty_ldisc_kill+0xcb/0x190
[ 80.885730] tty_ldisc_hangup+0x338/0x3d0
[ 80.885730] __tty_hangup+0x504/0x740
[ 80.885730] tty_release+0x46e/0xd80
[ 80.885730] __fput+0x37f/0x770
[ 80.885730] __x64_sys_close+0x7b/0xb0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.893739] ------------[ cut here ]------------
[ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0
[ 80.894297] Modules linked in:
[ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11
[ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4
[ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0
[ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9
[ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286
[ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000
[ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518
[ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a
[ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4
[ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518
[ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000
[ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0
...
[ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at
[ 80.935774] ax25_bind+0x424/0x4e0
[ 80.935774] __sys_bind+0x1d9/0x270
[ 80.935774] __x64_sys_bind+0x75/0x80
[ 80.935774] do_syscall_64+0xc4/0x1b0
[ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f
Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb
in order to mitigate the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix to add refcount once page is set private
MM defined the rule [1] very clearly that once page was set with PG_private
flag, we should increment the refcount in that page, also main flows like
pageout(), migrate_page() will assume there is one additional page
reference count if page_has_private() returns true. Otherwise, we may
get a BUG in page migration:
page:0000000080d05b9d refcount:-1 mapcount:0 mapping:000000005f4d82a8
index:0xe2 pfn:0x14c12
aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e"
flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0|
zone=1|lastcpupid=0x1fffff)
page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0)
------------[ cut here ]------------
kernel BUG at include/linux/page_ref.h:184!
invalid opcode: 0000 [#1] SMP
CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5
RIP: 0010:migrate_page_move_mapping+0xac3/0xe70
Call Trace:
ubifs_migrate_page+0x22/0xc0 [ubifs]
move_to_new_page+0xb4/0x600
migrate_pages+0x1523/0x1cc0
compact_zone+0x8c5/0x14b0
kcompactd+0x2bc/0x560
kthread+0x18c/0x1e0
ret_from_fork+0x1f/0x30
Before the time, we should make clean a concept, what does refcount means
in page gotten from grab_cache_page_write_begin(). There are 2 situations:
Situation 1: refcount is 3, page is created by __page_cache_alloc.
TYPE_A - the write process is using this page
TYPE_B - page is assigned to one certain mapping by calling
__add_to_page_cache_locked()
TYPE_C - page is added into pagevec list corresponding current cpu by
calling lru_cache_add()
Situation 2: refcount is 2, page is gotten from the mapping's tree
TYPE_B - page has been assigned to one certain mapping
TYPE_A - the write process is using this page (by calling
page_cache_get_speculative())
Filesystem releases one refcount by calling put_page() in xxx_write_end(),
the released refcount corresponds to TYPE_A (write task is using it). If
there are any processes using a page, page migration process will skip the
page by judging whether expected_page_refs() equals to page refcount.
The BUG is caused by following process:
PA(cpu 0) kcompactd(cpu 1)
compact_zone
ubifs_write_begin
page_a = grab_cache_page_write_begin
add_to_page_cache_lru
lru_cache_add
pagevec_add // put page into cpu 0's pagevec
(refcnf = 3, for page creation process)
ubifs_write_end
SetPagePrivate(page_a) // doesn't increase page count !
unlock_page(page_a)
put_page(page_a) // refcnt = 2
[...]
PB(cpu 0)
filemap_read
filemap_get_pages
add_to_page_cache_lru
lru_cache_add
__pagevec_lru_add // traverse all pages in cpu 0's pagevec
__pagevec_lru_add_fn
SetPageLRU(page_a)
isolate_migratepages
isolate_migratepages_block
get_page_unless_zero(page_a)
// refcnt = 3
list_add(page_a, from_list)
migrate_pages(from_list)
__unmap_and_move
move_to_new_page
ubifs_migrate_page(page_a)
migrate_page_move_mapping
expected_page_refs get 3
(migration[1] + mapping[1] + private[1])
release_pages
put_page_testzero(page_a) // refcnt = 3
page_ref_freeze // refcnt = 0
page_ref_dec_and_test(0 - 1 = -1)
page_ref_unfreeze
VM_BUG_ON_PAGE(-1 != 0, page)
UBIFS doesn't increase the page refcount after setting private flag, which
leads to page migration task believes the page is not used by any other
processes, so the page is migrated. This causes concurrent accessing on
page refcount between put_page() called by other process(eg. read process
calls lru_cache_add) and page_ref_unfreeze() called by mi
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix inode reference leakage in ceph_get_snapdir()
The ceph_get_inode() will search for or insert a new inode into the
hash for the given vino, and return a reference to it. If new is
non-NULL, its reference is consumed.
We should release the reference when in error handing cases. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probe
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: Fix error handling in mt8183_da7219_max98357_dev_probe
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: atmel: Fix error handling in snd_proto_probe
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a3xx: fix error handling in a3xx_gpu_init()
These error paths returned 1 on failure, instead of a negative error
code. This would lead to an Oops in the caller. A second problem is
that the check for "if (ret != -ENODATA)" did not work because "ret" was
set to 1. |
| In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
of_parse_phandle() returns a node pointer with refcount incremented, we should
use of_node_put() on it when not need anymore. Add missing of_node_put() to
avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ipmb: Fix refcount leak in ipmi_ipmb_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak. |
| The BWOCXRUN.BwocxrunCtrl.1 control contains a method named
“CreateProcess.” This method contains validation to ensure an attacker
cannot run arbitrary command lines. After validation, the values
supplied in the HTML are passed to the Windows CreateProcessA API.
The validation can be bypassed allowing for running arbitrary command
lines. The command line can specify running remote files (example: UNC
command line).
A function exists at offset 100019B0 of bwocxrun.ocx. Inside this
function, there are 3 calls to strstr to check the contents of the user
specified command line. If “\setup.exe,” “\bwvbprt.exe,” or
“\bwvbprtl.exe” are contained in the command line (strstr returns
nonzero value), the command line passes validation and is then passed to
CreateProcessA. |
| Unquoted Windows search path vulnerability in Schneider Electric Floating License Manager 1.0.0 through 1.4.0 allows local users to gain privileges via a Trojan horse application with a name composed of an initial substring of a path that contains a space character. |
| Adobe Experience Manager versions 6.5.13.0 (and earlier) is affected by a Violation of Secure Design Principles vulnerability that could lead to bypass the security feature of the encryption mechanism in the backend . An attacker could leverage this vulnerability to decrypt secrets, however, this is a high-complexity attack as the threat actor needs to already possess those secrets. Exploitation of this issue requires low-privilege access to AEM. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_flow_offload: reset dst in route object after setting up flow
dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes
to bug_table entries, and as a result the last entry in a bug table will
be ignored, potentially leading to an unexpected panic(). All prior
entries in the table will be handled correctly.
The arm64 ABI requires that struct fields of up to 8 bytes are
naturally-aligned, with padding added within a struct such that struct
are suitably aligned within arrays.
When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
signed int file_disp; // 4 bytes
unsigned short line; // 2 bytes
unsigned short flags; // 2 bytes
}
... with 12 bytes total, requiring 4-byte alignment.
When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
unsigned short flags; // 2 bytes
< implicit padding > // 2 bytes
}
... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing
padding, requiring 4-byte alginment.
When we create a bug_entry in assembly, we align the start of the entry
to 4 bytes, which implicitly handles padding for any prior entries.
However, we do not align the end of the entry, and so when
CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding
bytes.
For the main kernel image this is not a problem as find_bug() doesn't
depend on the trailing padding bytes when searching for entries:
for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
if (bugaddr == bug_addr(bug))
return bug;
However for modules, module_bug_finalize() depends on the trailing
bytes when calculating the number of entries:
mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
... and as the last bug_entry lacks the necessary padding bytes, this entry
will not be counted, e.g. in the case of a single entry:
sechdrs[i].sh_size == 6
sizeof(struct bug_entry) == 8;
sechdrs[i].sh_size / sizeof(struct bug_entry) == 0;
Consequently module_find_bug() will miss the last bug_entry when it does:
for (i = 0; i < mod->num_bugs; ++i, ++bug)
if (bugaddr == bug_addr(bug))
goto out;
... which can lead to a kenrel panic due to an unhandled bug.
This can be demonstrated with the following module:
static int __init buginit(void)
{
WARN(1, "hello\n");
return 0;
}
static void __exit bugexit(void)
{
}
module_init(buginit);
module_exit(bugexit);
MODULE_LICENSE("GPL");
... which will trigger a kernel panic when loaded:
------------[ cut here ]------------
hello
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in: hello(O+)
CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : buginit+0x18/0x1000 [hello]
lr : buginit+0x18/0x1000 [hello]
sp : ffff800080533ae0
x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58
x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0
x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006
x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720
x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312
x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8
x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000
x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0
Call trace:
buginit+0x18/0x1000 [hello]
do_one_initcall+0x80/0x1c8
do_init_module+0x60/0x218
load_module+0x1ba4/0x1d70
__do_sys_init_module+0x198/0x1d0
__arm64_sys_init_module+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc
---truncated--- |
| The Appointment Booking Calendar WordPress plugin before 1.6.7.43 does not escape template syntax provided via user input, leading to Twig Template Injection which further exploited can result to remote code Execution by high privilege such as admins |
