| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix info leak when fetching board id
Add the missing sanity check when fetching the board id to avoid leaking
slab data when later requesting the firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix info leak when fetching fw build id
Add the missing sanity checks and move the 255-byte build-id buffer off
the stack to avoid leaking stack data through debugfs in case the
build-info reply is malformed. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/debugfs: Fix two locking issues with thermal zone debug
With the current thermal zone locking arrangement in the debugfs code,
user space can open the "mitigations" file for a thermal zone before
the zone's debugfs pointer is set which will result in a NULL pointer
dereference in tze_seq_start().
Moreover, thermal_debug_tz_remove() is not called under the thermal
zone lock, so it can run in parallel with the other functions accessing
the thermal zone's struct thermal_debugfs object. Then, it may clear
tz->debugfs after one of those functions has checked it and the
struct thermal_debugfs object may be freed prematurely.
To address the first problem, pass a pointer to the thermal zone's
struct thermal_debugfs object to debugfs_create_file() in
thermal_debug_tz_add() and make tze_seq_start(), tze_seq_next(),
tze_seq_stop(), and tze_seq_show() retrieve it from s->private
instead of a pointer to the thermal zone object. This will ensure
that tz_debugfs will be valid across the "mitigations" file accesses
until thermal_debugfs_remove_id() called by thermal_debug_tz_remove()
removes that file.
To address the second problem, use tz->lock in thermal_debug_tz_remove()
around the tz->debugfs value check (in case the same thermal zone is
removed at the same time in two different threads) and its reset to NULL.
Cc :6.8+ <stable@vger.kernel.org> # 6.8+ |
| In the Linux kernel, the following vulnerability has been resolved:
efi/unaccepted: touch soft lockup during memory accept
Commit 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by
parallel memory acceptance") has released the spinlock so other CPUs can
do memory acceptance in parallel and not triggers softlockup on other
CPUs.
However the softlock up was intermittent shown up if the memory of the
TD guest is large, and the timeout of softlockup is set to 1 second:
RIP: 0010:_raw_spin_unlock_irqrestore
Call Trace:
? __hrtimer_run_queues
<IRQ>
? hrtimer_interrupt
? watchdog_timer_fn
? __sysvec_apic_timer_interrupt
? __pfx_watchdog_timer_fn
? sysvec_apic_timer_interrupt
</IRQ>
? __hrtimer_run_queues
<TASK>
? hrtimer_interrupt
? asm_sysvec_apic_timer_interrupt
? _raw_spin_unlock_irqrestore
? __sysvec_apic_timer_interrupt
? sysvec_apic_timer_interrupt
accept_memory
try_to_accept_memory
do_huge_pmd_anonymous_page
get_page_from_freelist
__handle_mm_fault
__alloc_pages
__folio_alloc
? __tdx_hypercall
handle_mm_fault
vma_alloc_folio
do_user_addr_fault
do_huge_pmd_anonymous_page
exc_page_fault
? __do_huge_pmd_anonymous_page
asm_exc_page_fault
__handle_mm_fault
When the local irq is enabled at the end of accept_memory(), the
softlockup detects that the watchdog on single CPU has not been fed for
a while. That is to say, even other CPUs will not be blocked by
spinlock, the current CPU might be stunk with local irq disabled for a
while, which hurts not only nmi watchdog but also softlockup.
Chao Gao pointed out that the memory accept could be time costly and
there was similar report before. Thus to avoid any softlocup detection
during this stage, give the softlockup a flag to skip the timeout check
at the end of accept_memory(), by invoking touch_softlockup_watchdog(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix information leakage in /proc/net/ptype
In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.
Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix request.queuelist usage in flush
Friedrich Weber reported a kernel crash problem and bisected to commit
81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine").
The root cause is that we use "list_move_tail(&rq->queuelist, pending)"
in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since
it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch().
We don't initialize its queuelist just for this first request, although
the queuelist of all later popped requests will be initialized.
Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so
rq->queuelist doesn't need to be initialized. It should be ok since rq
can't be on any list when PREFLUSH or POSTFLUSH, has no move actually.
Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in
flush state machine") also has another requirement that no drivers would
touch rq->queuelist after blk_mq_end_request() since we will reuse it to
add rq to the post-flush pending list in POSTFLUSH. If this is not true,
we will have to revert that commit IMHO.
This updated version adds "list_del_init(&rq->queuelist)" in flush rq
callback since the dm layer may submit request of a weird invalid format
(REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add
if without this "list_del_init(&rq->queuelist)". The weird invalid format
problem should be fixed in dm layer. |
| In guix-daemon in GNU Guix before 1618ca7, a content-addressed-mirrors file can be written to create a setuid program that allows a regular user to gain the privileges of the build user that runs it (even after the build has ended). |
| Click Studios Passwordstate before 9.9 Build 9972 has a potential authentication bypass for Passwordstate emergency access. By using a crafted URL while on the Emergency Access web page, an unauthorized person can gain access to the Passwordstate Administration section. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/amd: flush any delayed gfxoff on suspend entry"
commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring
callbacks") caused GFXOFF control to be used more heavily and the
codepath that was removed from commit 0dee72639533 ("drm/amd: flush any
delayed gfxoff on suspend entry") now can be exercised at suspend again.
Users report that by using GNOME to suspend the lockscreen trigger will
cause SDMA traffic and the system can deadlock.
This reverts commit 0dee726395333fea833eaaf838bc80962df886c8. |
| In One Identity OneLogin before 2025.3.0, a request returns the OIDC client secret with GET Apps API v2 (even though this secret should only be returned when an App is first created), |
| A vulnerability in the Hot Standby Router Protocol (HSRP) subsystem of Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to receive potentially sensitive information from an affected device. The vulnerability is due to insufficient memory initialization. An attacker could exploit this vulnerability by receiving HSRPv2 traffic from an adjacent HSRP member. A successful exploit could allow the attacker to receive potentially sensitive information from the adjacent device. |
| D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix crash when replugging CSR fake controllers
It seems fake CSR 5.0 clones can cause the suspend notifier to be
registered twice causing the following kernel panic:
[ 71.986122] Call Trace:
[ 71.986124] <TASK>
[ 71.986125] blocking_notifier_chain_register+0x33/0x60
[ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da]
[ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477]
[ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300
[ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90
[ 71.986167] usb_probe_interface+0xe3/0x2b0
[ 71.986171] really_probe+0xdb/0x380
[ 71.986174] ? pm_runtime_barrier+0x54/0x90
[ 71.986177] __driver_probe_device+0x78/0x170
[ 71.986180] driver_probe_device+0x1f/0x90
[ 71.986183] __device_attach_driver+0x89/0x110
[ 71.986186] ? driver_allows_async_probing+0x70/0x70
[ 71.986189] bus_for_each_drv+0x8c/0xe0
[ 71.986192] __device_attach+0xb2/0x1e0
[ 71.986195] bus_probe_device+0x92/0xb0
[ 71.986198] device_add+0x422/0x9a0
[ 71.986201] ? sysfs_merge_group+0xd4/0x110
[ 71.986205] usb_set_configuration+0x57a/0x820
[ 71.986208] usb_generic_driver_probe+0x4f/0x70
[ 71.986211] usb_probe_device+0x3a/0x110
[ 71.986213] really_probe+0xdb/0x380
[ 71.986216] ? pm_runtime_barrier+0x54/0x90
[ 71.986219] __driver_probe_device+0x78/0x170
[ 71.986221] driver_probe_device+0x1f/0x90
[ 71.986224] __device_attach_driver+0x89/0x110
[ 71.986227] ? driver_allows_async_probing+0x70/0x70
[ 71.986230] bus_for_each_drv+0x8c/0xe0
[ 71.986232] __device_attach+0xb2/0x1e0
[ 71.986235] bus_probe_device+0x92/0xb0
[ 71.986237] device_add+0x422/0x9a0
[ 71.986239] ? _dev_info+0x7d/0x98
[ 71.986242] ? blake2s_update+0x4c/0xc0
[ 71.986246] usb_new_device.cold+0x148/0x36d
[ 71.986250] hub_event+0xa8a/0x1910
[ 71.986255] process_one_work+0x1c4/0x380
[ 71.986259] worker_thread+0x51/0x390
[ 71.986262] ? rescuer_thread+0x3b0/0x3b0
[ 71.986264] kthread+0xdb/0x110
[ 71.986266] ? kthread_complete_and_exit+0x20/0x20
[ 71.986268] ret_from_fork+0x1f/0x30
[ 71.986273] </TASK>
[ 71.986274] ---[ end trace 0000000000000000 ]---
[ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17 |
| TorchServe is a flexible and easy-to-use tool for serving and scaling PyTorch models in production. In affected versions the two gRPC ports 7070 and 7071, are not bound to [localhost](http://localhost/) by default, so when TorchServe is launched, these two interfaces are bound to all interfaces. Customers using PyTorch inference Deep Learning Containers (DLC) through Amazon SageMaker and EKS are not affected. This issue in TorchServe has been fixed in PR #3083. TorchServe release 0.11.0 includes the fix to address this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Moby is an open source container framework that is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. In 26.0.0, IPv6 is not disabled on network interfaces, including those belonging to networks where `--ipv6=false`. An container with an `ipvlan` or `macvlan` interface will normally be configured to share an external network link with the host machine. Because of this direct access, (1) Containers may be able to communicate with other hosts on the local network over link-local IPv6 addresses, (2) if router advertisements are being broadcast over the local network, containers may get SLAAC-assigned addresses, and (3) the interface will be a member of IPv6 multicast groups. This means interfaces in IPv4-only networks present an unexpectedly and unnecessarily increased attack surface. The issue is patched in 26.0.2. To completely disable IPv6 in a container, use `--sysctl=net.ipv6.conf.all.disable_ipv6=1` in the `docker create` or `docker run` command. Or, in the service configuration of a `compose` file. |
| Uninitialized data in endianness conversion in the XEvent handling of the X.Org X Server before 2017-06-19 allowed authenticated malicious users to access potentially privileged data from the X server. |
| A flaw was found in the way xserver memory was not properly initialized. This could leak parts of server memory to the X client. In cases where Xorg server runs with elevated privileges, this could result in possible ASLR bypass. Xorg-server before version 1.20.9 is vulnerable. |
| Improper initialization in some Intel(R) Power Gadget software for Windwos all versions may allow an authenticated user to potentially enable denial of service via local access. |
| Iterator failure issue in the multi-mode input module.
Impact: Successful exploitation of this vulnerability may cause iterator failures and affect availability. |
| Improper locking for some Intel(R) TDX Module firmware before version 1.5.13 may allow a privileged user to potentially enable escalation of privilege via local access. |
