| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weak authentication in Fortinet FortiManager Cloud, FortiAnalyzer versions 7.6.0 through 7.6.1, 7.4.1 through 7.4.3, FortiAnalyzer Cloud versions 7.4.1 through 7.4.3, FortiManager versions 7.6.0 through 7.6.1, 7.4.1 through 7.4.3, FortiManager Cloud versions 7.4.1 through 7.4.3 allows attacker to execute unauthorized code or commands via a brute-force attack. |
| A security flaw has been discovered in vim up to 9.1.1615. Affected by this vulnerability is the function main of the file src/xxd/xxd.c of the component xxd. The manipulation results in buffer overflow. The attack requires a local approach. The exploit has been released to the public and may be exploited. Upgrading to version 9.1.1616 addresses this issue. The patch is identified as eeef7c77436a78cd27047b0f5fa6925d56de3cb0. It is recommended to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix data corruption after conversion from inline format
Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in
block_write_full_page()") uncovered a latent bug in ocfs2 conversion
from inline inode format to a normal inode format.
The code in ocfs2_convert_inline_data_to_extents() attempts to zero out
the whole cluster allocated for file data by grabbing, zeroing, and
dirtying all pages covering this cluster. However these pages are
beyond i_size, thus writeback code generally ignores these dirty pages
and no blocks were ever actually zeroed on the disk.
This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero
pages past i_size.") for standard ocfs2 write path, inline conversion
path was apparently forgotten; the commit log also has a reasoning why
the zeroing actually is not needed.
After commit 6dbf7bb55598, things became worse as writeback code stopped
invalidating buffers on pages beyond i_size and thus these pages end up
with clean PageDirty bit but with buffers attached to these pages being
still dirty. So when a file is converted from inline format, then
writeback triggers, and then the file is grown so that these pages
become valid, the invalid dirtiness state is preserved,
mark_buffer_dirty() does nothing on these pages (buffers are already
dirty) but page is never written back because it is clean. So data
written to these pages is lost once pages are reclaimed.
Simple reproducer for the problem is:
xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \
-c "pwrite 4000 2000" ocfs2_file
After unmounting and mounting the fs again, you can observe that end of
'ocfs2_file' has lost its contents.
Fix the problem by not doing the pointless zeroing during conversion
from inline format similarly as in the standard write path.
[akpm@linux-foundation.org: fix whitespace, per Joseph] |
| Improper Handling of Length Parameter Inconsistency vulnerability in Mitsubishi Electric Corporation MELSEC-Q Series Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, Q26UDVCPU, Q04UDPVCPU, Q06UDPVCPU, Q13UDPVCPU, and Q26UDPVCPU with the first 5 digits of serial No. "24082" to "27081" allows a remote attacker to cause an integer underflow by sending specially crafted packets to the affected product to stop Ethernet communication and the execution of control programs on the product, when the user authentication function is enabled. The user authentication function is enabled by default only when settings are configured by GX Works2, which complies with the Cybersecurity Law of the People's Republic of China, and is normally disabled. |
| A vulnerability has been identified in OpenV2G (All versions < V0.9.6). The OpenV2G EXI parsing feature is missing a length check when parsing X509 serial numbers. Thus, an attacker could introduce a buffer overflow that leads to memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: possible buffer overflow
Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is
checked after access. |
| Mattermost Confluence Plugin version <1.5.0 fails to handle unexpected request body which allows attackers to crash the plugin via constant hit to create channel subscription endpoint with an invalid request body. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: uclogic: Fix user-memory-access bug in uclogic_params_ugee_v2_init_event_hooks()
When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and
then the below user-memory-access bug occurs.
In hid_test_uclogic_params_cleanup_event_hooks(),it call
uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so
when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata()
will access hdev->dev with hdev=NULL, which will cause below
user-memory-access.
So add a fake_device with quirks member and call hid_set_drvdata()
to assign hdev->dev->driver_data which avoids the null-ptr-def bug
for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying
this patch, the below user-memory-access bug never occurs.
general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f]
CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6
DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
? sched_clock_cpu+0x69/0x550
? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70
? load_balance+0x2950/0x2950
? rcu_trc_cmpxchg_need_qs+0x67/0xa0
hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0
? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600
? __switch_to+0x5cf/0xe60
? migrate_enable+0x260/0x260
? __kthread_parkme+0x83/0x150
? kunit_try_run_case_cleanup+0xe0/0xe0
kunit_generic_run_threadfn_adapter+0x4a/0x90
? kunit_try_catch_throw+0x80/0x80
kthread+0x2b5/0x380
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace 0000000000000000 ]---
RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
DR0: ffffffff8fdd6cf4 DR1:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix shift out-of-bounds issue
[ 567.613292] shift exponent 255 is too large for 64-bit type 'long unsigned int'
[ 567.614498] CPU: 5 PID: 238 Comm: kworker/5:1 Tainted: G OE 6.2.0-34-generic #34~22.04.1-Ubuntu
[ 567.614502] Hardware name: AMD Splinter/Splinter-RPL, BIOS WS43927N_871 09/25/2023
[ 567.614504] Workqueue: events send_exception_work_handler [amdgpu]
[ 567.614748] Call Trace:
[ 567.614750] <TASK>
[ 567.614753] dump_stack_lvl+0x48/0x70
[ 567.614761] dump_stack+0x10/0x20
[ 567.614763] __ubsan_handle_shift_out_of_bounds+0x156/0x310
[ 567.614769] ? srso_alias_return_thunk+0x5/0x7f
[ 567.614773] ? update_sd_lb_stats.constprop.0+0xf2/0x3c0
[ 567.614780] svm_range_split_by_granularity.cold+0x2b/0x34 [amdgpu]
[ 567.615047] ? srso_alias_return_thunk+0x5/0x7f
[ 567.615052] svm_migrate_to_ram+0x185/0x4d0 [amdgpu]
[ 567.615286] do_swap_page+0x7b6/0xa30
[ 567.615291] ? srso_alias_return_thunk+0x5/0x7f
[ 567.615294] ? __free_pages+0x119/0x130
[ 567.615299] handle_pte_fault+0x227/0x280
[ 567.615303] __handle_mm_fault+0x3c0/0x720
[ 567.615311] handle_mm_fault+0x119/0x330
[ 567.615314] ? lock_mm_and_find_vma+0x44/0x250
[ 567.615318] do_user_addr_fault+0x1a9/0x640
[ 567.615323] exc_page_fault+0x81/0x1b0
[ 567.615328] asm_exc_page_fault+0x27/0x30
[ 567.615332] RIP: 0010:__get_user_8+0x1c/0x30 |
| Improper input validation for DIMM serial presence detect (SPD) metadata could allow an attacker with physical access, ring0 access on a system with a non-compliant DIMM, or control over the Root of Trust for BIOS update, to bypass SMM isolation potentially resulting in arbitrary code execution at the SMM level. |
| Improper input validation in the GPU driver could allow an attacker to exploit a heap overflow potentially resulting in arbitrary code execution. |
| Improper input validation in AMD Crash Defender could allow an attacker to provide the Windows® system process ID to a kernel-mode driver, resulting in an operating system crash, potentially leading to denial of service. |
| Improper input validation in the system management mode (SMM) could allow a privileged attacker to overwrite arbitrary memory potentially resulting in arbitrary code execution at the SMM level. |
| Improper input validation in the SMM handler may allow a privileged attacker to overwrite SMRAM, potentially leading to arbitrary code execution. |
| Improper input validation in the SMM handler may allow a privileged attacker to overwrite SMRAM, potentially leading to arbitrary code execution. |
| Improper input validation in the SMM handler may allow a privileged attacker to overwrite SMRAM, potentially leading to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs
Fan speed minimum can be enforced from sysfs. For example, setting
current fan speed to 20 is used to enforce fan speed to be at 100%
speed, 19 - to be not below 90% speed, etcetera. This feature provides
ability to limit fan speed according to some system wise
considerations, like absence of some replaceable units or high system
ambient temperature.
Request for changing fan minimum speed is configuration request and can
be set only through 'sysfs' write procedure. In this situation value of
argument 'state' is above nominal fan speed maximum.
Return non-zero code in this case to avoid
thermal_cooling_device_stats_update() call, because in this case
statistics update violates thermal statistics table range.
The issues is observed in case kernel is configured with option
CONFIG_THERMAL_STATISTICS.
Here is the trace from KASAN:
[ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0
[ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444
[ 159.545625] Call Trace:
[ 159.548366] dump_stack+0x92/0xc1
[ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0
[ 159.635869] thermal_zone_device_update+0x345/0x780
[ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0
[ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]
[ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]
[ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core]
[ 160.070233] RIP: 0033:0x7fd995909970
[ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..
[ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970
[ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001
[ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700
[ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013
[ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013
[ 160.143671]
[ 160.145338] Allocated by task 2924:
[ 160.149242] kasan_save_stack+0x19/0x40
[ 160.153541] __kasan_kmalloc+0x7f/0xa0
[ 160.157743] __kmalloc+0x1a2/0x2b0
[ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0
[ 160.167687] __thermal_cooling_device_register+0x1b5/0x500
[ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0
[ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]
[ 160.248140]
[ 160.249807] The buggy address belongs to the object at ffff888116163400
[ 160.249807] which belongs to the cache kmalloc-1k of size 1024
[ 160.263814] The buggy address is located 64 bytes to the right of
[ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800)
[ 160.277536] The buggy address belongs to the page:
[ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160
[ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0
[ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0
[ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000
[ 160.327033] page dumped because: kasan: bad access detected
[ 160.333270]
[ 160.334937] Memory state around the buggy address:
[ 160.356469] >ffff888116163800: fc .. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: add ipvlan_route_v6_outbound() helper
Inspired by syzbot reports using a stack of multiple ipvlan devices.
Reduce stack size needed in ipvlan_process_v6_outbound() by moving
the flowi6 struct used for the route lookup in an non inlined
helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack,
immediately reclaimed.
Also make sure ipvlan_process_v4_outbound() is not inlined.
We might also have to lower MAX_NEST_DEV, because only syzbot uses
setups with more than four stacked devices.
BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000)
stack guard page: 0000 [#1] SMP KASAN
CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188
Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89
RSP: 0018:ffffc9000e804000 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568
RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c
R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000
FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<#DF>
</#DF>
<TASK>
[<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
[<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline]
[<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
[<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline]
[<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline]
[<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline]
[<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632
[<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306
[<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline]
[<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221
[<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606
[<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline]
[<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116
[<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638
[<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651
[<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline]
[<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline]
[<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline]
[<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline]
[<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline]
[<f
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: VMAP_STACK overflow detection thread-safe
commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added
support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to
`shadow_stack` temporarily before switching finally to per-cpu
`overflow_stack`.
If two CPUs/harts are racing and end up in over flowing kernel stack, one
or both will end up corrupting each other state because `shadow_stack` is
not per-cpu. This patch optimizes per-cpu overflow stack switch by
directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`.
Following are the changes in this patch
- Defines an asm macro to obtain per-cpu symbols in destination
register.
- In entry.S, when overflow is detected, per-cpu overflow stack is
located using per-cpu asm macro. Computing per-cpu symbol requires
a temporary register. x31 is saved away into CSR_SCRATCH
(CSR_SCRATCH is anyways zero since we're in kernel).
Please see Links for additional relevant disccussion and alternative
solution.
Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT`
Kernel crash log below
Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT
Task stack: [0xff20000010a98000..0xff20000010a9c000]
Overflow stack: [0xff600001f7d98370..0xff600001f7d99370]
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
epc : __memset+0x60/0xfc
ra : recursive_loop+0x48/0xc6 [lkdtm]
epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80
gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88
t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0
s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000
a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000
a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff
s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90
s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684
s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10
s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4
t5 : ffffffff815dbab8 t6 : ff20000010a9bb48
status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f
Kernel panic - not syncing: Kernel stack overflow
CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006754>] dump_backtrace+0x30/0x38
[<ffffffff808de798>] show_stack+0x40/0x4c
[<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c
[<ffffffff808ea2d8>] dump_stack+0x18/0x20
[<ffffffff808dec06>] panic+0x126/0x2fe
[<ffffffff800065ea>] walk_stackframe+0x0/0xf0
[<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm]
SMP: stopping secondary CPUs
---[ end Kernel panic - not syncing: Kernel stack overflow ]--- |
