| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: thermal: Fix out-of-bounds memory accesses
Currently, mlxsw allows cooling states to be set above the maximum
cooling state supported by the driver:
# cat /sys/class/thermal/thermal_zone2/cdev0/type
mlxsw_fan
# cat /sys/class/thermal/thermal_zone2/cdev0/max_state
10
# echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state
# echo $?
0
This results in out-of-bounds memory accesses when thermal state
transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the
transition table is accessed with a too large index (state) [1].
According to the thermal maintainer, it is the responsibility of the
driver to reject such operations [2].
Therefore, return an error when the state to be set exceeds the maximum
cooling state supported by the driver.
To avoid dead code, as suggested by the thermal maintainer [3],
partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling
device with cooling levels") that tried to interpret these invalid
cooling states (above the maximum) in a special way. The cooling levels
array is not removed in order to prevent the fans going below 20% PWM,
which would cause them to get stuck at 0% PWM.
[1]
BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290
Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122
Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016
Workqueue: events_freezable_power_ thermal_zone_device_check
Call Trace:
dump_stack_lvl+0x8b/0xb3
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x7f/0x11b
thermal_cooling_device_stats_update+0x271/0x290
__thermal_cdev_update+0x15e/0x4e0
thermal_cdev_update+0x9f/0xe0
step_wise_throttle+0x770/0xee0
thermal_zone_device_update+0x3f6/0xdf0
process_one_work+0xa42/0x1770
worker_thread+0x62f/0x13e0
kthread+0x3ee/0x4e0
ret_from_fork+0x1f/0x30
Allocated by task 1:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
thermal_cooling_device_setup_sysfs+0x153/0x2c0
__thermal_cooling_device_register.part.0+0x25b/0x9c0
thermal_cooling_device_register+0xb3/0x100
mlxsw_thermal_init+0x5c5/0x7e0
__mlxsw_core_bus_device_register+0xcb3/0x19c0
mlxsw_core_bus_device_register+0x56/0xb0
mlxsw_pci_probe+0x54f/0x710
local_pci_probe+0xc6/0x170
pci_device_probe+0x2b2/0x4d0
really_probe+0x293/0xd10
__driver_probe_device+0x2af/0x440
driver_probe_device+0x51/0x1e0
__driver_attach+0x21b/0x530
bus_for_each_dev+0x14c/0x1d0
bus_add_driver+0x3ac/0x650
driver_register+0x241/0x3d0
mlxsw_sp_module_init+0xa2/0x174
do_one_initcall+0xee/0x5f0
kernel_init_freeable+0x45a/0x4de
kernel_init+0x1f/0x210
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff8881052f7800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 1016 bytes inside of
1024-byte region [ffff8881052f7800, ffff8881052f7c00)
The buggy address belongs to the page:
page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0
head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: core: Validate channel ID when processing command completions
MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: bcm2835: Fix out-of-bounds access with more than 4 slaves
Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.
The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3: Slaves with a higher chipselect are
rejected by spi_add_device().
However the commit neglected that num_chipselect only limits the number
of *native* chipselects. If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].
As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Correct the length check which causes memory corruption
We've suffered from severe kernel crashes due to memory corruption on
our production environment, like,
Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009] anon_vma_clone+0x5d/0x170
[1640542.567417] __split_vma+0x91/0x1a0
[1640542.567777] do_munmap+0x2c6/0x320
[1640542.568128] vm_munmap+0x54/0x70
[1640542.569990] __x64_sys_munmap+0x22/0x30
[1640542.572005] do_syscall_64+0x5b/0x1b0
[1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27
James Wang has reproduced it stably on the latest 4.19 LTS.
After some debugging, we finally proved that it's due to ftrace
buffer out-of-bound access using a debug tool as follows:
[ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[ 86.780806] no_context+0xdf/0x3c0
[ 86.784327] __do_page_fault+0x252/0x470
[ 86.788367] do_page_fault+0x32/0x140
[ 86.792145] page_fault+0x1e/0x30
[ 86.795576] strncpy_from_unsafe+0x66/0xb0
[ 86.799789] fetch_memory_string+0x25/0x40
[ 86.804002] fetch_deref_string+0x51/0x60
[ 86.808134] kprobe_trace_func+0x32d/0x3a0
[ 86.812347] kprobe_dispatcher+0x45/0x50
[ 86.816385] kprobe_ftrace_handler+0x90/0xf0
[ 86.820779] ftrace_ops_assist_func+0xa1/0x140
[ 86.825340] 0xffffffffc00750bf
[ 86.828603] do_sys_open+0x5/0x1f0
[ 86.832124] do_syscall_64+0x5b/0x1b0
[ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9
commit b220c049d519 ("tracing: Check length before giving out
the filter buffer") adds length check to protect trace data
overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent
overflow entirely, the length check should also take the sizeof
entry->array[0] into account, since this array[0] is filled the
length of trace data and occupy addtional space and risk overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix an incorrect limit in filelayout_decode_layout()
The "sizeof(struct nfs_fh)" is two bytes too large and could lead to
memory corruption. It should be NFS_MAXFHSIZE because that's the size
of the ->data[] buffer.
I reversed the size of the arguments to put the variable on the left. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
The value of mirror->pg_bytes_written should only be updated after a
successful attempt to flush out the requests on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix data stream corruption
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat) |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix a buffer overflow in otx2_set_rxfh_context()
This function is called from ethtool_set_rxfh() and "*rss_context"
comes from the user. Add some bounds checking to prevent memory
corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
cxgb4: avoid accessing registers when clearing filters
Hardware register having the server TID base can contain
invalid values when adapter is in bad state (for example,
due to AER fatal error). Reading these invalid values in the
register can lead to out-of-bound memory access. So, fix
by using the saved server TID base when clearing filters. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix panic during f2fs_resize_fs()
f2fs_resize_fs() hangs in below callstack with testcase:
- mkfs 16GB image & mount image
- dd 8GB fileA
- dd 8GB fileB
- sync
- rm fileA
- sync
- resize filesystem to 8GB
kernel BUG at segment.c:2484!
Call Trace:
allocate_segment_by_default+0x92/0xf0 [f2fs]
f2fs_allocate_data_block+0x44b/0x7e0 [f2fs]
do_write_page+0x5a/0x110 [f2fs]
f2fs_outplace_write_data+0x55/0x100 [f2fs]
f2fs_do_write_data_page+0x392/0x850 [f2fs]
move_data_page+0x233/0x320 [f2fs]
do_garbage_collect+0x14d9/0x1660 [f2fs]
free_segment_range+0x1f7/0x310 [f2fs]
f2fs_resize_fs+0x118/0x330 [f2fs]
__f2fs_ioctl+0x487/0x3680 [f2fs]
__x64_sys_ioctl+0x8e/0xd0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The root cause is we forgot to check that whether we have enough space
in resized filesystem to store all valid blocks in before-resizing
filesystem, then allocator will run out-of-space during block migration
in free_segment_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Wrap the tx reporter dump callback to extract the sq
Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct
mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually
of type struct mlx5e_tx_timeout_ctx *.
mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected
mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000
BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae)
kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
[mlx5_core]
Call Trace:
mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core]
devlink_health_do_dump.part.91+0x71/0xd0
devlink_health_report+0x157/0x1b0
mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core]
? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0
[mlx5_core]
? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core]
? update_load_avg+0x19b/0x550
? set_next_entity+0x72/0x80
? pick_next_task_fair+0x227/0x340
? finish_task_switch+0xa2/0x280
mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core]
process_one_work+0x1de/0x3a0
worker_thread+0x2d/0x3c0
? process_one_work+0x3a0/0x3a0
kthread+0x115/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x30
--[ end trace 51ccabea504edaff ]---
RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
end Kernel panic - not syncing: Fatal exception
To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which
extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the
TX-timeout-recovery flow dump callback. |
| Open Management Infrastructure (OMI) Elevation of Privilege Vulnerability |
| Secure Boot Security Feature Bypass Vulnerability |
| Libarchive Remote Code Execution Vulnerability |
| Libde265 v1.0.8 was discovered to contain a heap-buffer-overflow vulnerability via put_unweighted_pred_16_fallback in fallback-motion.cc. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted video file. |
| Libde265 v1.0.8 was discovered to contain a heap-buffer-overflow vulnerability via put_epel_16_fallback in fallback-motion.cc. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted video file. |
| Libde265 v1.0.8 was discovered to contain a heap-buffer-overflow vulnerability via put_qpel_0_0_fallback_16 in fallback-motion.cc. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted video file. |
| Libde265 v1.0.8 was discovered to contain a heap-buffer-overflow vulnerability via put_epel_hv_fallback<unsigned short> in fallback-motion.cc. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted video file. |
| Libde265 v1.0.8 was discovered to contain a heap-buffer-overflow vulnerability via put_weighted_pred_avg_16_fallback in fallback-motion.cc. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted video file. |
| Libde265 v1.0.8 was discovered to contain a stack-buffer-overflow vulnerability via void put_epel_hv_fallback<unsigned short> in fallback-motion.cc. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted video file. |
