| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| AspEmail 5.6.0.2 contains a binary permission vulnerability that allows local users to escalate privileges through the Persits Software EmailAgent service. Attackers can exploit full write permissions in the BIN directory to replace the service executable and gain elevated system access. |
| MacForge contains an insecure XPC service that allows local, unprivileged users to escalate their privileges to root.This issue affects MacForge: 1.2.0 Beta 1. |
| Kentico 11 through 12 lets attackers upload and explore files without authentication via the cmsmodules/medialibrary/formcontrols/liveselectors/insertimageormedia/tabs_media.aspx URI. NOTE: The vendor disputes the report because the researcher did not configure the media library permissions correctly. The vendor states that by default all users can read/modify/upload files, and it’s up to the administrator to decide who should have access to the media library and set the permissions accordingly. See the vendor documentation in the references for more information |
| iStats contains an insecure XPC service that allows local, unprivileged users to escalate their privileges to root via command injection.This issue affects iStats: 7.10.4. |
| An issue was discovered in DriveLock 24.1 through 24.1.*, 24.2 before 24.2.8, and 25.1 before 25.1.6. Directories and files created by the agent are created with overly permissive ACLs, allowing local users without administrator rights to trigger actions or destabilize the agent. |
| Freedombox before 25.17.1 does not set proper permissions for the backups-data directory, allowing the reading of dump files of databases. |
| A vulnerability in the session management system of the Cisco Catalyst SD-WAN Manager multi-tenant feature could allow an authenticated, remote attacker to access another tenant that is being managed by the same Cisco Catalyst SD-WAN Manager instance. This vulnerability requires the multi-tenant feature to be enabled.
This vulnerability is due to insufficient user session management within the Cisco Catalyst SD-WAN Manager system. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain unauthorized access to information about another tenant, make configuration changes, or possibly take a tenant offline causing a denial of service condition. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Tahoe 26.1. A standard user may be able to view files made from a disk image belonging to an administrator. |
| Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.14 and 7.4 GA through update 92 allows admin users of a virtual instance to add pages that are not in the default/main virtual instance, then any tenant can create a list of all other tenants. |
| IBM Security Verify Access Appliance and Container 10.0.0 through 10.0.8 could allow a local privileged user to perform unauthorized actions due to incorrect permissions assignment. |
| IBM QRadar SIEM 7.5 through 7.5 Update Pack 13 Independent Fix 01 could allow a local privileged user to perform unauthorized actions on configuration files due to improper permission assignment. |
| The Commerce component in Liferay Portal 7.3.0 through 7.4.3.112, and Liferay DXP 2023.Q4.0 through 2023.Q4.8, 2023.Q3.1 through 2023.Q3.10, 7.4 GA through update 92, and 7.3 service pack 3 through update 35 saves virtual products uploaded to Documents and Media with guest view permission, which allows remote attackers to access and download virtual products for free via a crafted URL. |
| Liferay Portal 7.3.0 through 7.4.3.119, and Liferay DXP 2023.Q3.1 through 2023.Q3.8, 2023.Q4.0 through 2023.Q4.5, 7.4 GA through update 92 and 7.3 GA though update 36 shows content to users who do not have permission to view it via the Menu Display Widget. This security flaw could result in sensitive information being exposed to unauthorized users. |
| An ACAP configuration file has improper permissions, which could allow command injection and potentially lead to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| An ACAP configuration file has improper permissions and lacks input validation, which could potentially lead to privilege escalation. This vulnerability can only be exploited if the Axis device is configured to allow the installation of unsigned ACAP applications, and if an attacker convinces the victim to install a malicious ACAP application. |
| A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 SP4). Affected applications contain private SSL/TLS keys on the server that are not properly protected allowing any user with server access to read these keys. This could allow an authenticated attacker to impersonate the server potentially enabling man-in-the-middle, traffic decryption or unauthorized access to services that trust these certificates. |
| A vulnerability has been identified in SICAM P850 (7KG8500-0AA00-0AA0) (All versions < V3.11), SICAM P850 (7KG8500-0AA00-2AA0) (All versions < V3.11), SICAM P850 (7KG8500-0AA10-0AA0) (All versions < V3.11), SICAM P850 (7KG8500-0AA10-2AA0) (All versions < V3.11), SICAM P850 (7KG8500-0AA30-0AA0) (All versions < V3.11), SICAM P850 (7KG8500-0AA30-2AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA01-0AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA01-2AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA02-0AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA02-2AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA11-0AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA11-2AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA12-0AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA12-2AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA31-0AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA31-2AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA32-0AA0) (All versions < V3.11), SICAM P850 (7KG8501-0AA32-2AA0) (All versions < V3.11), SICAM P855 (7KG8550-0AA00-0AA0) (All versions < V3.11), SICAM P855 (7KG8550-0AA00-2AA0) (All versions < V3.11), SICAM P855 (7KG8550-0AA10-0AA0) (All versions < V3.11), SICAM P855 (7KG8550-0AA10-2AA0) (All versions < V3.11), SICAM P855 (7KG8550-0AA30-0AA0) (All versions < V3.11), SICAM P855 (7KG8550-0AA30-2AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA01-0AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA01-2AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA02-0AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA02-2AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA11-0AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA11-2AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA12-0AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA12-2AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA31-0AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA31-2AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA32-0AA0) (All versions < V3.11), SICAM P855 (7KG8551-0AA32-2AA0) (All versions < V3.11), SICAM T (All versions < V3.0). Affected devices are missing cookie protection flags when using the default settings. An attacker who gains access to a session token can use it to impersonate a legitimate application user. |
| An Improper Access Control in the SFTP service in Fortra's GoAnywhere MFT prior to version 7.9.0 allows Web Users with an Authentication Alias and a valid SSH key but limited to Password authentication for SFTP to still login using their SSH key. |
| In Splunk Enterprise for Windows versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, a new installation of or an upgrade to an affected version can result in incorrect permissions assignment in the Splunk Enterprise for Windows Installation directory. This lets non-administrator users on the machine access the directory and all its contents. |
| In Splunk Universal Forwarder for Windows versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, a new installation of or an upgrade to an affected version can result in incorrect permissions assignment in the Universal Forwarder for Windows Installation directory. This lets non-administrator users on the machine access the directory and all its contents. |
