| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: avoid overflows in dirty throttling logic
The dirty throttling logic is interspersed with assumptions that dirty
limits in PAGE_SIZE units fit into 32-bit (so that various multiplications
fit into 64-bits). If limits end up being larger, we will hit overflows,
possible divisions by 0 etc. Fix these problems by never allowing so
large dirty limits as they have dubious practical value anyway. For
dirty_bytes / dirty_background_bytes interfaces we can just refuse to set
so large limits. For dirty_ratio / dirty_background_ratio it isn't so
simple as the dirty limit is computed from the amount of available memory
which can change due to memory hotplug etc. So when converting dirty
limits from ratios to numbers of pages, we just don't allow the result to
exceed UINT_MAX.
This is root-only triggerable problem which occurs when the operator
sets dirty limits to >16 TB. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix memory leak in nfs4_set_security_label
We leak nfs_fattr and nfs4_label every time we set a security xattr. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Add tx check to prevent skb leak
Below is a summary of how the driver stores a reference to an skb during
transmit:
tx_buff[free_map[consumer_index]]->skb = new_skb;
free_map[consumer_index] = IBMVNIC_INVALID_MAP;
consumer_index ++;
Where variable data looks like this:
free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
consumer_index^
tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]
The driver has checks to ensure that free_map[consumer_index] pointed to
a valid index but there was no check to ensure that this index pointed
to an unused/null skb address. So, if, by some chance, our free_map and
tx_buff lists become out of sync then we were previously risking an
skb memory leak. This could then cause tcp congestion control to stop
sending packets, eventually leading to ETIMEDOUT.
Therefore, add a conditional to ensure that the skb address is null. If
not then warn the user (because this is still a bug that should be
patched) and free the old pointer to prevent memleak/tcp problems. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: check bo_va->bo is non-NULL before using it
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: add bounds checking to xlog_recover_process_data
There is a lack of verification of the space occupied by fixed members
of xlog_op_header in the xlog_recover_process_data.
We can create a crafted image to trigger an out of bounds read by
following these steps:
1) Mount an image of xfs, and do some file operations to leave records
2) Before umounting, copy the image for subsequent steps to simulate
abnormal exit. Because umount will ensure that tail_blk and
head_blk are the same, which will result in the inability to enter
xlog_recover_process_data
3) Write a tool to parse and modify the copied image in step 2
4) Make the end of the xlog_op_header entries only 1 byte away from
xlog_rec_header->h_size
5) xlog_rec_header->h_num_logops++
6) Modify xlog_rec_header->h_crc
Fix:
Add a check to make sure there is sufficient space to access fixed members
of xlog_op_header. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super()
In the following concurrency we will access the uninitialized rs->lock:
ext4_fill_super
ext4_register_sysfs
// sysfs registered msg_ratelimit_interval_ms
// Other processes modify rs->interval to
// non-zero via msg_ratelimit_interval_ms
ext4_orphan_cleanup
ext4_msg(sb, KERN_INFO, "Errors on filesystem, "
__ext4_msg
___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state)
if (!rs->interval) // do nothing if interval is 0
return 1;
raw_spin_trylock_irqsave(&rs->lock, flags)
raw_spin_trylock(lock)
_raw_spin_trylock
__raw_spin_trylock
spin_acquire(&lock->dep_map, 0, 1, _RET_IP_)
lock_acquire
__lock_acquire
register_lock_class
assign_lock_key
dump_stack();
ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10);
raw_spin_lock_init(&rs->lock);
// init rs->lock here
and get the following dump_stack:
=========================================================
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504
[...]
Call Trace:
dump_stack_lvl+0xc5/0x170
dump_stack+0x18/0x30
register_lock_class+0x740/0x7c0
__lock_acquire+0x69/0x13a0
lock_acquire+0x120/0x450
_raw_spin_trylock+0x98/0xd0
___ratelimit+0xf6/0x220
__ext4_msg+0x7f/0x160 [ext4]
ext4_orphan_cleanup+0x665/0x740 [ext4]
__ext4_fill_super+0x21ea/0x2b10 [ext4]
ext4_fill_super+0x14d/0x360 [ext4]
[...]
=========================================================
Normally interval is 0 until s_msg_ratelimit_state is initialized, so
___ratelimit() does nothing. But registering sysfs precedes initializing
rs->lock, so it is possible to change rs->interval to a non-zero value
via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is
uninitialized, and then a call to ext4_msg triggers the problem by
accessing an uninitialized rs->lock. Therefore register sysfs after all
initializations are complete to avoid such problems. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix UBSAN warning in kv_dpm.c
Adds bounds check for sumo_vid_mapping_entry. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix crash while reading debugfs attribute
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
There are cases after NPIV deletion where the fabric switch still believes
the NPIV is logged into the fabric. This occurs when a vport is
unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the
fabric.
Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including
the fabric D_ID, removes the last ndlp reference and frees the ndlp rport
object. This sometimes causes the race condition where the final DA_ID and
LOGO are skipped from being sent to the fabric switch.
Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID
and LOGO are sent. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
lpfc_worker_wake_up() calls the lpfc_work_done() routine, which takes the
hbalock. Thus, lpfc_worker_wake_up() should not be called while holding the
hbalock to avoid potential deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: read txq->read_ptr under lock
If we read txq->read_ptr without lock, we can read the same
value twice, then obtain the lock, and reclaim from there
to two different places, but crucially reclaim the same
entry twice, resulting in the WARN_ONCE() a little later.
Fix that by reading txq->read_ptr under lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: Fully protect modes[] with dev->mode_config.mutex
The modes[] array contains pointers to modes on the connectors'
mode lists, which are protected by dev->mode_config.mutex.
Thus we need to extend modes[] the same protection or by the
time we use it the elements may already be pointing to
freed/reused memory. |
| In the Linux kernel, the following vulnerability has been resolved:
dyndbg: fix old BUG_ON in >control parser
Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't
really look), lets make sure by removing it, doing pr_err and return
-EINVAL instead. |
| In the Linux kernel, the following vulnerability has been resolved:
VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()
Syzkaller hit 'WARNING in dg_dispatch_as_host' bug.
memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg"
at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24)
WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237
dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237
Some code commentry, based on my understanding:
544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size)
/// This is 24 + payload_size
memcpy(&dg_info->msg, dg, dg_size);
Destination = dg_info->msg ---> this is a 24 byte
structure(struct vmci_datagram)
Source = dg --> this is a 24 byte structure (struct vmci_datagram)
Size = dg_size = 24 + payload_size
{payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32.
35 struct delayed_datagram_info {
36 struct datagram_entry *entry;
37 struct work_struct work;
38 bool in_dg_host_queue;
39 /* msg and msg_payload must be together. */
40 struct vmci_datagram msg;
41 u8 msg_payload[];
42 };
So those extra bytes of payload are copied into msg_payload[], a run time
warning is seen while fuzzing with Syzkaller.
One possible way to fix the warning is to split the memcpy() into
two parts -- one -- direct assignment of msg and second taking care of payload.
Gustavo quoted:
"Under FORTIFY_SOURCE we should not copy data across multiple members
in a structure." |
| In the Linux kernel, the following vulnerability has been resolved:
dma-direct: Leak pages on dma_set_decrypted() failure
On TDX it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
DMA could free decrypted/shared pages if dma_set_decrypted() fails. This
should be a rare case. Just leak the pages in this case instead of
freeing them. |
| In the Linux kernel, the following vulnerability has been resolved:
block: prevent division by zero in blk_rq_stat_sum()
The expression dst->nr_samples + src->nr_samples may
have zero value on overflow. It is necessary to add
a check to avoid division by zero.
Found by Linux Verification Center (linuxtesting.org) with Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/coco: Require seeding RNG with RDRAND on CoCo systems
There are few uses of CoCo that don't rely on working cryptography and
hence a working RNG. Unfortunately, the CoCo threat model means that the
VM host cannot be trusted and may actively work against guests to
extract secrets or manipulate computation. Since a malicious host can
modify or observe nearly all inputs to guests, the only remaining source
of entropy for CoCo guests is RDRAND.
If RDRAND is broken -- due to CPU hardware fault -- the RNG as a whole
is meant to gracefully continue on gathering entropy from other sources,
but since there aren't other sources on CoCo, this is catastrophic.
This is mostly a concern at boot time when initially seeding the RNG, as
after that the consequences of a broken RDRAND are much more
theoretical.
So, try at boot to seed the RNG using 256 bits of RDRAND output. If this
fails, panic(). This will also trigger if the system is booted without
RDRAND, as RDRAND is essential for a safe CoCo boot.
Add this deliberately to be "just a CoCo x86 driver feature" and not
part of the RNG itself. Many device drivers and platforms have some
desire to contribute something to the RNG, and add_device_randomness()
is specifically meant for this purpose.
Any driver can call it with seed data of any quality, or even garbage
quality, and it can only possibly make the quality of the RNG better or
have no effect, but can never make it worse.
Rather than trying to build something into the core of the RNG, consider
the particular CoCo issue just a CoCo issue, and therefore separate it
all out into driver (well, arch/platform) code.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF in smb2_reconnect_server()
The UAF bug is due to smb2_reconnect_server() accessing a session that
is already being teared down by another thread that is executing
__cifs_put_smb_ses(). This can happen when (a) the client has
connection to the server but no session or (b) another thread ends up
setting @ses->ses_status again to something different than
SES_EXITING.
To fix this, we need to make sure to unconditionally set
@ses->ses_status to SES_EXITING and prevent any other threads from
setting a new status while we're still tearing it down.
The following can be reproduced by adding some delay to right after
the ipc is freed in __cifs_put_smb_ses() - which will give
smb2_reconnect_server() worker a chance to run and then accessing
@ses->ipc:
kinit ...
mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10
[disconnect srv]
ls /mnt/1 &>/dev/null
sleep 30
kdestroy
[reconnect srv]
sleep 10
umount /mnt/1
...
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0
Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad
de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75
7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8
RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83
RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800
RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000
R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000
FS: 0000000000000000(0000) GS:ffff888157c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c1/0x3f0
? asm_exc_general_protection+0x26/0x30
? __list_del_entry_valid_or_report+0x33/0xf0
__cifs_put_smb_ses+0x1ae/0x500 [cifs]
smb2_reconnect_server+0x4ed/0x710 [cifs]
process_one_work+0x205/0x6b0
worker_thread+0x191/0x360
? __pfx_worker_thread+0x10/0x10
kthread+0xe2/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/PM: Drain runtime-idle callbacks before driver removal
A race condition between the .runtime_idle() callback and the .remove()
callback in the rtsx_pcr PCI driver leads to a kernel crash due to an
unhandled page fault [1].
The problem is that rtsx_pci_runtime_idle() is not expected to be running
after pm_runtime_get_sync() has been called, but the latter doesn't really
guarantee that. It only guarantees that the suspend and resume callbacks
will not be running when it returns.
However, if a .runtime_idle() callback is already running when
pm_runtime_get_sync() is called, the latter will notice that the runtime PM
status of the device is RPM_ACTIVE and it will return right away without
waiting for the former to complete. In fact, it cannot wait for
.runtime_idle() to complete because it may be called from that callback (it
arguably does not make much sense to do that, but it is not strictly
prohibited).
Thus in general, whoever is providing a .runtime_idle() callback needs
to protect it from running in parallel with whatever code runs after
pm_runtime_get_sync(). [Note that .runtime_idle() will not start after
pm_runtime_get_sync() has returned, but it may continue running then if it
has started earlier.]
One way to address that race condition is to call pm_runtime_barrier()
after pm_runtime_get_sync() (not before it, because a nonzero value of the
runtime PM usage counter is necessary to prevent runtime PM callbacks from
being invoked) to wait for the .runtime_idle() callback to complete should
it be running at that point. A suitable place for doing that is in
pci_device_remove() which calls pm_runtime_get_sync() before removing the
driver, so it may as well call pm_runtime_barrier() subsequently, which
will prevent the race in question from occurring, not just in the rtsx_pcr
driver, but in any PCI drivers providing .runtime_idle() callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau: lock the client object tree.
It appears the client object tree has no locking unless I've missed
something else. Fix races around adding/removing client objects,
mostly vram bar mappings.
4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI
[ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
[ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
[ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe
[ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206
[ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58
[ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400
[ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000
[ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0
[ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007
[ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000
[ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0
[ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4562.099544] Call Trace:
[ 4562.099555] <TASK>
[ 4562.099573] ? die_addr+0x36/0x90
[ 4562.099583] ? exc_general_protection+0x246/0x4a0
[ 4562.099593] ? asm_exc_general_protection+0x26/0x30
[ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau]
[ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau]
[ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau]
[ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0
[ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm]
[ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270
[ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau]
[ 4562.100356] __do_fault+0x32/0x150
[ 4562.100362] do_fault+0x7c/0x560
[ 4562.100369] __handle_mm_fault+0x800/0xc10
[ 4562.100382] handle_mm_fault+0x17c/0x3e0
[ 4562.100388] do_user_addr_fault+0x208/0x860
[ 4562.100395] exc_page_fault+0x7f/0x200
[ 4562.100402] asm_exc_page_fault+0x26/0x30
[ 4562.100412] RIP: 0033:0x9b9870
[ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7
[ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246
[ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000
[ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066
[ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000
[ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff
[ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4562.100446] </TASK>
[ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink
---truncated--- |
