| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: gen_estimator: fix est_timer() vs CONFIG_PREEMPT_RT=y
syzbot reported a WARNING in est_timer() [1]
Problem here is that with CONFIG_PREEMPT_RT=y, timer callbacks
can be preempted.
Adopt preempt_disable_nested()/preempt_enable_nested() to fix this.
[1]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline]
RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Call Trace:
<TASK>
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22c/0x710 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1043
smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using
kmap_local_page(), which requires unmapping in Last-In-First-Out order.
The current code maps dst_pte first, then src_pte, but unmaps them in the
same order (dst_pte, src_pte), violating the LIFO requirement. This
causes the warning in kunmap_local_indexed():
WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c
addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx)
Fix this by reversing the unmap order to respect LIFO ordering.
This issue follows the same pattern as similar fixes:
- commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order")
- commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename")
Both of which addressed the same fundamental requirement that kmap_local
operations must follow LIFO ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Prevent recovery work from being queued during device removal
Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()
to ensure that no new recovery work items can be queued after device
removal has started. Previously, recovery work could be scheduled even
after canceling existing work, potentially leading to use-after-free
bugs if recovery accessed freed resources.
Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better
reflect its new behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: Fix sched_numa_find_nth_cpu() if mask offline
sched_numa_find_nth_cpu() uses a bsearch to look for the 'closest'
CPU in sched_domains_numa_masks and given cpus mask. However they
might not intersect if all CPUs in the cpus mask are offline. bsearch
will return NULL in that case, bail out instead of dereferencing a
bogus pointer.
The previous behaviour lead to this bug when using maxcpus=4 on an
rk3399 (LLLLbb) (i.e. booting with all big CPUs offline):
[ 1.422922] Unable to handle kernel paging request at virtual address ffffff8000000000
[ 1.423635] Mem abort info:
[ 1.423889] ESR = 0x0000000096000006
[ 1.424227] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.424715] SET = 0, FnV = 0
[ 1.424995] EA = 0, S1PTW = 0
[ 1.425279] FSC = 0x06: level 2 translation fault
[ 1.425735] Data abort info:
[ 1.425998] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 1.426499] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1.426952] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1.427428] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000004a9f000
[ 1.428038] [ffffff8000000000] pgd=18000000f7fff403, p4d=18000000f7fff403, pud=18000000f7fff403, pmd=0000000000000000
[ 1.429014] Internal error: Oops: 0000000096000006 [#1] SMP
[ 1.429525] Modules linked in:
[ 1.429813] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc4-dirty #343 PREEMPT
[ 1.430559] Hardware name: Pine64 RockPro64 v2.1 (DT)
[ 1.431012] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.431634] pc : sched_numa_find_nth_cpu+0x2a0/0x488
[ 1.432094] lr : sched_numa_find_nth_cpu+0x284/0x488
[ 1.432543] sp : ffffffc084e1b960
[ 1.432843] x29: ffffffc084e1b960 x28: ffffff80078a8800 x27: ffffffc0846eb1d0
[ 1.433495] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 1.434144] x23: 0000000000000000 x22: fffffffffff7f093 x21: ffffffc081de6378
[ 1.434792] x20: 0000000000000000 x19: 0000000ffff7f093 x18: 00000000ffffffff
[ 1.435441] x17: 3030303866666666 x16: 66663d736b73616d x15: ffffffc104e1b5b7
[ 1.436091] x14: 0000000000000000 x13: ffffffc084712860 x12: 0000000000000372
[ 1.436739] x11: 0000000000000126 x10: ffffffc08476a860 x9 : ffffffc084712860
[ 1.437389] x8 : 00000000ffffefff x7 : ffffffc08476a860 x6 : 0000000000000000
[ 1.438036] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 1.438683] x2 : 0000000000000000 x1 : ffffffc0846eb000 x0 : ffffff8000407b68
[ 1.439332] Call trace:
[ 1.439559] sched_numa_find_nth_cpu+0x2a0/0x488 (P)
[ 1.440016] smp_call_function_any+0xc8/0xd0
[ 1.440416] armv8_pmu_init+0x58/0x27c
[ 1.440770] armv8_cortex_a72_pmu_init+0x20/0x2c
[ 1.441199] arm_pmu_device_probe+0x1e4/0x5e8
[ 1.441603] armv8_pmu_device_probe+0x1c/0x28
[ 1.442007] platform_probe+0x5c/0xac
[ 1.442347] really_probe+0xbc/0x298
[ 1.442683] __driver_probe_device+0x78/0x12c
[ 1.443087] driver_probe_device+0xdc/0x160
[ 1.443475] __driver_attach+0x94/0x19c
[ 1.443833] bus_for_each_dev+0x74/0xd4
[ 1.444190] driver_attach+0x24/0x30
[ 1.444525] bus_add_driver+0xe4/0x208
[ 1.444874] driver_register+0x60/0x128
[ 1.445233] __platform_driver_register+0x24/0x30
[ 1.445662] armv8_pmu_driver_init+0x28/0x4c
[ 1.446059] do_one_initcall+0x44/0x25c
[ 1.446416] kernel_init_freeable+0x1dc/0x3bc
[ 1.446820] kernel_init+0x20/0x1d8
[ 1.447151] ret_from_fork+0x10/0x20
[ 1.447493] Code: 90022e21 f000e5f5 910de2b5 2a1703e2 (f8767803)
[ 1.448040] ---[ end trace 0000000000000000 ]---
[ 1.448483] note: swapper/0[1] exited with preempt_count 1
[ 1.449047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.449741] SMP: stopping secondary CPUs
[ 1.450105] Kernel Offset: disabled
[ 1.450419] CPU features: 0x000000,00080000,20002001,0400421b
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qpic-snand: unregister ECC engine on probe error and device remove
The on-host hardware ECC engine remains registered both when
the spi_register_controller() function returns with an error
and also on device removal.
Change the qcom_spi_probe() function to unregister the engine
on the error path, and add the missing unregistering call to
qcom_spi_remove() to avoid possible use-after-free issues. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked()
soc-generic-dmaengine-pcm.c uses same dev for both CPU and Platform.
In such case, CPU component driver might not have driver->name, then
snd_soc_lookup_component_nolocked() will be NULL pointer access error.
Care NULL driver name.
Call trace:
strcmp from snd_soc_lookup_component_nolocked+0x64/0xa4
snd_soc_lookup_component_nolocked from snd_soc_unregister_component_by_driver+0x2c/0x44
snd_soc_unregister_component_by_driver from snd_dmaengine_pcm_unregister+0x28/0x64
snd_dmaengine_pcm_unregister from devres_release_all+0x98/0xfc
devres_release_all from device_unbind_cleanup+0xc/0x60
device_unbind_cleanup from really_probe+0x220/0x2c8
really_probe from __driver_probe_device+0x88/0x1a0
__driver_probe_device from driver_probe_device+0x30/0x110
driver_probe_device from __driver_attach+0x90/0x178
__driver_attach from bus_for_each_dev+0x7c/0xcc
bus_for_each_dev from bus_add_driver+0xcc/0x1ec
bus_add_driver from driver_register+0x80/0x11c
driver_register from do_one_initcall+0x58/0x23c
do_one_initcall from kernel_init_freeable+0x198/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Disable works on hci_unregister_dev
This make use of disable_work_* on hci_unregister_dev since the hci_dev is
about to be freed new submissions are not disarable. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: Block access to folio overlimit
syz reported a slab-out-of-bounds Write in fuse_dev_do_write.
When the number of bytes to be retrieved is truncated to the upper limit
by fc->max_pages and there is an offset, the oob is triggered.
Add a loop termination condition to prevent overruns. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix null-ptr-deref in bitmap_parselist()
A crash was observed with the following output:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 92 Comm: osnoise_cpus Not tainted 6.17.0-rc4-00201-gd69eb204c255 #138 PREEMPT(voluntary)
RIP: 0010:bitmap_parselist+0x53/0x3e0
Call Trace:
<TASK>
osnoise_cpus_write+0x7a/0x190
vfs_write+0xf8/0x410
? do_sys_openat2+0x88/0xd0
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, "0-2", 0);
When user pass 'count=0' to osnoise_cpus_write(), kmalloc() will return
ZERO_SIZE_PTR (16) and cpulist_parse() treat it as a normal value, which
trigger the null pointer dereference. Add check for the parameter 'count'. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()
Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can
cause various locking issues; see the following stack trace (edited for
style) as one example:
...
[10.011566] do_raw_spin_lock.cold
[10.011570] try_to_wake_up (5) double-acquiring the same
[10.011575] kick_pool rq_lock, causing a hardlockup
[10.011579] __queue_work
[10.011582] queue_work_on
[10.011585] kernfs_notify
[10.011589] cgroup_file_notify
[10.011593] try_charge_memcg (4) memcg accounting raises an
[10.011597] obj_cgroup_charge_pages MEMCG_MAX event
[10.011599] obj_cgroup_charge_account
[10.011600] __memcg_slab_post_alloc_hook
[10.011603] __kmalloc_node_noprof
...
[10.011611] bpf_map_kmalloc_node
[10.011612] __bpf_async_init
[10.011615] bpf_timer_init (3) BPF calls bpf_timer_init()
[10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable
[10.011619] bpf__sched_ext_ops_runnable
[10.011620] enqueue_task_scx (2) BPF runs with rq_lock held
[10.011622] enqueue_task
[10.011626] ttwu_do_activate
[10.011629] sched_ttwu_pending (1) grabs rq_lock
...
The above was reproduced on bpf-next (b338cf849ec8) by modifying
./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during
ops.runnable(), and hacking the memcg accounting code a bit to make
a bpf_timer_init() call more likely to raise an MEMCG_MAX event.
We have also run into other similar variants (both internally and on
bpf-next), including double-acquiring cgroup_file_kn_lock, the same
worker_pool::lock, etc.
As suggested by Shakeel, fix this by using __GFP_HIGH instead of
GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg()
raises an MEMCG_MAX event, we call __memcg_memory_event() with
@allow_spinning=false and avoid calling cgroup_file_notify() there.
Depends on mm patch
"memcg: skip cgroup_file_notify if spinning is not allowed":
https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/
v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/
https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/
v1 approach:
https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix subvolume deletion lockup caused by inodes xarray race
There is a race condition between inode eviction and inode caching that
can cause a live struct btrfs_inode to be missing from the root->inodes
xarray. Specifically, there is a window during evict() between the inode
being unhashed and deleted from the xarray. If btrfs_iget() is called
for the same inode in that window, it will be recreated and inserted
into the xarray, but then eviction will delete the new entry, leaving
nothing in the xarray:
Thread 1 Thread 2
---------------------------------------------------------------
evict()
remove_inode_hash()
btrfs_iget_path()
btrfs_iget_locked()
btrfs_read_locked_inode()
btrfs_add_inode_to_root()
destroy_inode()
btrfs_destroy_inode()
btrfs_del_inode_from_root()
__xa_erase
In turn, this can cause issues for subvolume deletion. Specifically, if
an inode is in this lost state, and all other inodes are evicted, then
btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely.
If the lost inode has a delayed_node attached to it, then when
btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(),
it will loop forever because the delayed_nodes xarray will never become
empty (unless memory pressure forces the inode out). We saw this
manifest as soft lockups in production.
Fix it by only deleting the xarray entry if it matches the given inode
(using __xa_cmpxchg()). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: fix potential OF node use-after-free
The for_each_child_of_node() helper drops the reference it takes to each
node as it iterates over children and an explicit of_node_put() is only
needed when exiting the loop early.
Drop the recently introduced bogus additional reference count decrement
at each iteration that could potentially lead to a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: always call ceph_shift_unused_folios_left()
The function ceph_process_folio_batch() sets folio_batch entries to
NULL, which is an illegal state. Before folio_batch_release() crashes
due to this API violation, the function ceph_shift_unused_folios_left()
is supposed to remove those NULLs from the array.
However, since commit ce80b76dd327 ("ceph: introduce
ceph_process_folio_batch() method"), this shifting doesn't happen
anymore because the "for" loop got moved to ceph_process_folio_batch(),
and now the `i` variable that remains in ceph_writepages_start()
doesn't get incremented anymore, making the shifting effectively
unreachable much of the time.
Later, commit 1551ec61dc55 ("ceph: introduce ceph_submit_write()
method") added more preconditions for doing the shift, replacing the
`i` check (with something that is still just as broken):
- if ceph_process_folio_batch() fails, shifting never happens
- if ceph_move_dirty_page_in_page_array() was never called (because
ceph_process_folio_batch() has returned early for some of various
reasons), shifting never happens
- if `processed_in_fbatch` is zero (because ceph_process_folio_batch()
has returned early for some of the reasons mentioned above or
because ceph_move_dirty_page_in_page_array() has failed), shifting
never happens
Since those two commits, any problem in ceph_process_folio_batch()
could crash the kernel, e.g. this way:
BUG: kernel NULL pointer dereference, address: 0000000000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es #714 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023
Workqueue: writeback wb_workfn (flush-ceph-1)
RIP: 0010:folios_put_refs+0x85/0x140
Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 >
RSP: 0018:ffffb880af8db778 EFLAGS: 00010207
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003
RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0
RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f
R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0
R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000
FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
ceph_writepages_start+0xeb9/0x1410
The crash can be reproduced easily by changing the
ceph_check_page_before_write() return value to `-E2BIG`.
(Interestingly, the crash happens only if `huge_zero_folio` has
already been allocated; without `huge_zero_folio`,
is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL
entries instead of dereferencing them. That makes reproducing the bug
somewhat unreliable. See
https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com
for a discussion of this detail.)
My suggestion is to move the ceph_shift_unused_folios_left() to right
after ceph_process_folio_batch() to ensure it always gets called to
fix up the illegal folio_batch state. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error
The function move_dirty_folio_in_page_array() was created by commit
ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by
moving code from ceph_writepages_start() to this function.
This new function is supposed to return an error code which is checked
by the caller (now ceph_process_folio_batch()), and on error, the
caller invokes redirty_page_for_writepage() and then breaks from the
loop.
However, the refactoring commit has gone wrong, and it by accident, it
always returns 0 (= success) because it first NULLs the pointer and
then returns PTR_ERR(NULL) which is always 0. This means errors are
silently ignored, leaving NULL entries in the page array, which may
later crash the kernel.
The simple solution is to call PTR_ERR() before clearing the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix NULL pointer dereference in ethtool loopback test
The igb driver currently causes a NULL pointer dereference when executing
the ethtool loopback test. This occurs because there is no associated
q_vector for the test ring when it is set up, as interrupts are typically
not added to the test rings.
Since commit 5ef44b3cb43b removed the napi_id assignment in
__xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it.
Therefore, simply use 0 as the last parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: sync features on RTM_NEWLINK
Syzkaller managed to lock the lower device via ETHTOOL_SFEATURES:
netdev_lock include/linux/netdevice.h:2761 [inline]
netdev_lock_ops include/net/netdev_lock.h:42 [inline]
netdev_sync_lower_features net/core/dev.c:10649 [inline]
__netdev_update_features+0xcb1/0x1be0 net/core/dev.c:10819
netdev_update_features+0x6d/0xe0 net/core/dev.c:10876
macsec_notify+0x2f5/0x660 drivers/net/macsec.c:4533
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2267 [inline]
call_netdevice_notifiers net/core/dev.c:2281 [inline]
netdev_features_change+0x85/0xc0 net/core/dev.c:1570
__dev_ethtool net/ethtool/ioctl.c:3469 [inline]
dev_ethtool+0x1536/0x19b0 net/ethtool/ioctl.c:3502
dev_ioctl+0x392/0x1150 net/core/dev_ioctl.c:759
It happens because lower features are out of sync with the upper:
__dev_ethtool (real_dev)
netdev_lock_ops(real_dev)
ETHTOOL_SFEATURES
__netdev_features_change
netdev_sync_upper_features
disable LRO on the lower
if (old_features != dev->features)
netdev_features_change
fires NETDEV_FEAT_CHANGE
macsec_notify
NETDEV_FEAT_CHANGE
netdev_update_features (for each macsec dev)
netdev_sync_lower_features
if (upper_features != lower_features)
netdev_lock_ops(lower) # lower == real_dev
stuck
...
netdev_unlock_ops(real_dev)
Per commit af5f54b0ef9e ("net: Lock lower level devices when updating
features"), we elide the lock/unlock when the upper and lower features
are synced. Makes sure the lower (real_dev) has proper features after
the macsec link has been created. This makes sure we never hit the
situation where we need to sync upper flags to the lower. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix runtime warning on truncate_folio_batch_exceptionals()
Commit 0e2f80afcfa6("fs/dax: ensure all pages are idle prior to
filesystem unmount") introduced the WARN_ON_ONCE to capture whether
the filesystem has removed all DAX entries or not and applied the
fix to xfs and ext4.
Apply the missed fix on erofs to fix the runtime warning:
[ 5.266254] ------------[ cut here ]------------
[ 5.266274] WARNING: CPU: 6 PID: 3109 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xff/0x260
[ 5.266294] Modules linked in:
[ 5.266999] CPU: 6 UID: 0 PID: 3109 Comm: umount Tainted: G S 6.16.0+ #6 PREEMPT(voluntary)
[ 5.267012] Tainted: [S]=CPU_OUT_OF_SPEC
[ 5.267017] Hardware name: Dell Inc. OptiPlex 5000/05WXFV, BIOS 1.5.1 08/24/2022
[ 5.267024] RIP: 0010:truncate_folio_batch_exceptionals+0xff/0x260
[ 5.267076] Code: 00 00 41 39 df 7f 11 eb 78 83 c3 01 49 83 c4 08 41 39 df 74 6c 48 63 f3 48 83 fe 1f 0f 83 3c 01 00 00 43 f6 44 26 08 01 74 df <0f> 0b 4a 8b 34 22 4c 89 ef 48 89 55 90 e8 ff 54 1f 00 48 8b 55 90
[ 5.267083] RSP: 0018:ffffc900013f36c8 EFLAGS: 00010202
[ 5.267095] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 5.267101] RDX: ffffc900013f3790 RSI: 0000000000000000 RDI: ffff8882a1407898
[ 5.267108] RBP: ffffc900013f3740 R08: 0000000000000000 R09: 0000000000000000
[ 5.267113] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 5.267119] R13: ffff8882a1407ab8 R14: ffffc900013f3888 R15: 0000000000000001
[ 5.267125] FS: 00007aaa8b437800(0000) GS:ffff88850025b000(0000) knlGS:0000000000000000
[ 5.267132] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.267138] CR2: 00007aaa8b3aac10 CR3: 000000024f764000 CR4: 0000000000f52ef0
[ 5.267144] PKRU: 55555554
[ 5.267150] Call Trace:
[ 5.267154] <TASK>
[ 5.267181] truncate_inode_pages_range+0x118/0x5e0
[ 5.267193] ? save_trace+0x54/0x390
[ 5.267296] truncate_inode_pages_final+0x43/0x60
[ 5.267309] evict+0x2a4/0x2c0
[ 5.267339] dispose_list+0x39/0x80
[ 5.267352] evict_inodes+0x150/0x1b0
[ 5.267376] generic_shutdown_super+0x41/0x180
[ 5.267390] kill_block_super+0x1b/0x50
[ 5.267402] erofs_kill_sb+0x81/0x90 [erofs]
[ 5.267436] deactivate_locked_super+0x32/0xb0
[ 5.267450] deactivate_super+0x46/0x60
[ 5.267460] cleanup_mnt+0xc3/0x170
[ 5.267475] __cleanup_mnt+0x12/0x20
[ 5.267485] task_work_run+0x5d/0xb0
[ 5.267499] exit_to_user_mode_loop+0x144/0x170
[ 5.267512] do_syscall_64+0x2b9/0x7c0
[ 5.267523] ? __lock_acquire+0x665/0x2ce0
[ 5.267535] ? __lock_acquire+0x665/0x2ce0
[ 5.267560] ? lock_acquire+0xcd/0x300
[ 5.267573] ? find_held_lock+0x31/0x90
[ 5.267582] ? mntput_no_expire+0x97/0x4e0
[ 5.267606] ? mntput_no_expire+0xa1/0x4e0
[ 5.267625] ? mntput+0x24/0x50
[ 5.267634] ? path_put+0x1e/0x30
[ 5.267647] ? do_faccessat+0x120/0x2f0
[ 5.267677] ? do_syscall_64+0x1a2/0x7c0
[ 5.267686] ? from_kgid_munged+0x17/0x30
[ 5.267703] ? from_kuid_munged+0x13/0x30
[ 5.267711] ? __do_sys_getuid+0x3d/0x50
[ 5.267724] ? do_syscall_64+0x1a2/0x7c0
[ 5.267732] ? irqentry_exit+0x77/0xb0
[ 5.267743] ? clear_bhb_loop+0x30/0x80
[ 5.267752] ? clear_bhb_loop+0x30/0x80
[ 5.267765] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 5.267772] RIP: 0033:0x7aaa8b32a9fb
[ 5.267781] Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 a6 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 e9 83 0d 00 f7 d8
[ 5.267787] RSP: 002b:00007ffd7c4c9468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 5.267796] RAX: 0000000000000000 RBX: 00005a61592a8b00 RCX: 00007aaa8b32a9fb
[ 5.267802] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005a61592b2080
[ 5.267806] RBP: 00007ffd7c4c9540 R08: 00007aaa8b403b20 R09: 0000000000000020
[ 5.267812] R10: 0000000000000001 R11: 0000000000000246 R12: 00005a61592a8c00
[ 5.267817] R13: 00000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates critical
race conditions:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed, resulting in
use-after-free bugs.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() — such as the container_of macro and
subsequent dereferences of the brcmf_btcoex_info object will cause
a use-after-free access. The following timeline illustrates this
scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci-> // USE
during the worker's execution|
*/ |
To resolve the race conditions, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix list corruption after hardware restart
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready. |
