| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic
The dma_map_single() doesn't permit zero length mapping. It causes a follow
panic.
A panic was reported on arm64:
[ 60.137988] ------------[ cut here ]------------
[ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624!
[ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l
2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn
c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl
[ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237
[ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590
[ 60.213149] lr : swiotlb_map+0x88/0x1f0
[ 60.216982] sp : ffff80000a883bc0
[ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000
[ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0
[ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000
[ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000
[ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180
[ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000
[ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000
[ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001
[ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010
[ 60.291658] Call trace:
[ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590
[ 60.298629] swiotlb_map+0x88/0x1f0
[ 60.302115] dma_map_page_attrs+0x188/0x230
[ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test]
[ 60.312660] __arm64_sys_ioctl+0xa8/0xf0
[ 60.316583] invoke_syscall+0x44/0x108
[ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0
[ 60.325038] do_el0_svc+0x2c/0xb8
[ 60.328351] el0_svc+0x2c/0x88
[ 60.331406] el0t_64_sync_handler+0xb8/0xc0
[ 60.335587] el0t_64_sync+0x18c/0x190
[ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000)
[ 60.345344] ---[ end trace 0000000000000000 ]---
To fix it, this patch adds a checking the payload length if it is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Fix memory leak in rsi_coex_attach()
The coex_cb needs to be freed when rsi_create_kthread() failed in
rsi_coex_attach(). |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: avoid SBSA UART accessing DMACR register
Chapter "B Generic UART" in "ARM Server Base System Architecture" [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.
When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
pl011_stop_rx+0x70/0x80
tty_port_shutdown+0x7c/0xb4
tty_port_close+0x60/0xcc
uart_close+0x34/0x8c
tty_release+0x144/0x4c0
__fput+0x78/0x220
____fput+0x1c/0x30
task_work_run+0x88/0xc0
do_notify_resume+0x8d0/0x123c
el0_svc+0xa8/0xc0
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon
This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.
[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html |
| In the Linux kernel, the following vulnerability has been resolved:
net: netsec: fix error handling in netsec_register_mdio()
If phy_device_register() fails, phy_device_free() need be called to
put refcount, so memory of phy device and device name can be freed
in callback function.
If get_phy_device() fails, mdiobus_unregister() need be called,
or it will cause warning in mdiobus_free() and kobject is leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
The "hdr.count * sizeof(s32)" multiplication can overflow on 32 bit
systems leading to memory corruption. Use array_size() to fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to invalidate dcc->f2fs_issue_discard in error path
Syzbot reports a NULL pointer dereference issue as below:
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
get_task_struct include/linux/sched/task.h:110 [inline]
kthread_stop+0x34/0x1c0 kernel/kthread.c:703
f2fs_stop_discard_thread+0x3c/0x5c fs/f2fs/segment.c:1638
kill_f2fs_super+0x5c/0x194 fs/f2fs/super.c:4522
deactivate_locked_super+0x70/0xe8 fs/super.c:332
deactivate_super+0xd0/0xd4 fs/super.c:363
cleanup_mnt+0x1f8/0x234 fs/namespace.c:1186
__cleanup_mnt+0x20/0x30 fs/namespace.c:1193
task_work_run+0xc4/0x14c kernel/task_work.c:177
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x26c/0xbe0 kernel/exit.c:795
do_group_exit+0x60/0xe8 kernel/exit.c:925
__do_sys_exit_group kernel/exit.c:936 [inline]
__se_sys_exit_group kernel/exit.c:934 [inline]
__wake_up_parent+0x0/0x40 kernel/exit.c:934
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581
The root cause of this issue is in error path of f2fs_start_discard_thread(),
it missed to invalidate dcc->f2fs_issue_discard, later kthread_stop() may
access invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/powerplay/psm: Fix memory leak in power state init
Commit 902bc65de0b3 ("drm/amdgpu/powerplay/psm: return an error in power
state init") made the power state init function return early in case of
failure to get an entry from the powerplay table, but it missed to clean up
the allocated memory for the current power state before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: meson-gx: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()
If the number of pages from the userptr BO differs from the SG BO then the
allocated memory for the SG table doesn't get freed before returning
-EINVAL, which may lead to a memory leak in some error paths. Fix this by
checking the number of pages before allocating memory for the SG table. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap-irq: Fix out-of-bounds access when allocating config buffers
When allocating the 2D array for handling IRQ type registers in
regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix
with num_config_bases rows and num_config_regs columns.
This is currently handled by allocating a buffer to hold a pointer for
each row (i.e. num_config_bases). After that, the logic attempts to
allocate the memory required to hold the register configuration for
each row. However, instead of doing this allocation for each row
(i.e. num_config_bases allocations), the logic erroneously does this
allocation num_config_regs number of times.
This scenario can lead to out-of-bounds accesses when num_config_regs
is greater than num_config_bases. Fix this by updating the terminating
condition of the loop that allocates the memory for holding the register
configuration to allocate memory only for each row in the matrix.
Amit Pundir reported a crash that was occurring on his db845c device
due to memory corruption (see "Closes" tag for Amit's report). The KASAN
report below helped narrow it down to this issue:
[ 14.033877][ T1] ==================================================================
[ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364
[ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1
[ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850
[ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8
[ 14.255669][ T1] The buggy address is located 0 bytes inside of
[ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync
Use-after-free can occur in hci_disconnect_all_sync if a connection is
deleted by concurrent processing of a controller event.
To prevent this the code now tries to iterate over the list backwards
to ensure the links are cleanup before its parents, also it no longer
relies on a cursor, instead it always uses the last element since
hci_abort_conn_sync is guaranteed to call hci_conn_del.
UAF crash log:
==================================================================
BUG: KASAN: slab-use-after-free in hci_set_powered_sync
(net/bluetooth/hci_sync.c:5424) [bluetooth]
Read of size 8 at addr ffff888009d9c000 by task kworker/u9:0/124
CPU: 0 PID: 124 Comm: kworker/u9:0 Tainted: G W
6.5.0-rc1+ #10
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0xdd/0x160
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
kasan_report+0xa6/0xe0
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_hci_set_powered_sync+0x10/0x10 [bluetooth]
? __pfx_lock_release+0x10/0x10
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_cmd_sync_work+0x137/0x220 [bluetooth]
process_one_work+0x526/0x9d0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x1a/0x90
worker_thread+0x92/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x196/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Allocated by task 1782:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x8f/0xa0
hci_conn_add+0xa5/0xa80 [bluetooth]
hci_bind_cis+0x881/0x9b0 [bluetooth]
iso_connect_cis+0x121/0x520 [bluetooth]
iso_sock_connect+0x3f6/0x790 [bluetooth]
__sys_connect+0x109/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 695:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x10a/0x180
__kmem_cache_free+0x14d/0x2e0
device_release+0x5d/0xf0
kobject_put+0xdf/0x270
hci_disconn_complete_evt+0x274/0x3a0 [bluetooth]
hci_event_packet+0x579/0x7e0 [bluetooth]
hci_rx_work+0x287/0xaa0 [bluetooth]
process_one_work+0x526/0x9d0
worker_thread+0x92/0x630
kthread+0x196/0x1e0
ret_from_fork+0x2c/0x50
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
net: deal with integer overflows in kmalloc_reserve()
Blamed commit changed:
ptr = kmalloc(size);
if (ptr)
size = ksize(ptr);
size = kmalloc_size_roundup(size);
ptr = kmalloc(size);
This allowed various crash as reported by syzbot [1]
and Kyle Zeng.
Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.
kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.
kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.
Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff
We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).
This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.
[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554
CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
The config passed in by pad wakeup is 1, when num_configs is 1,
Configuration [1] should not be fetched, which will be detected
by KASAN as a memory out of bounds condition. Modify to get
configs[1] when num_configs is 2. |
| In the Linux kernel, the following vulnerability has been resolved:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
After a call to console_unlock() in vcs_write() the vc_data struct can be
freed by vc_port_destruct(). Because of that, the struct vc_data pointer
must be reloaded in the while loop in vcs_write() after console_lock() to
avoid a UAF when vcs_size() is called.
Syzkaller reported a UAF in vcs_size().
BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119
Call Trace:
<TASK>
__asan_report_load4_noabort (mm/kasan/report_generic.c:380)
vcs_size (drivers/tty/vt/vc_screen.c:215)
vcs_write (drivers/tty/vt/vc_screen.c:664)
vfs_write (fs/read_write.c:582 fs/read_write.c:564)
...
<TASK>
Allocated by task 1213:
kmalloc_trace (mm/slab_common.c:1064)
vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680
drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058)
con_install (drivers/tty/vt/vt.c:3334)
tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415
drivers/tty/tty_io.c:1392)
tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128)
chrdev_open (fs/char_dev.c:415)
do_dentry_open (fs/open.c:921)
vfs_open (fs/open.c:1052)
...
Freed by task 4116:
kfree (mm/slab_common.c:1016)
vc_port_destruct (drivers/tty/vt/vt.c:1044)
tty_port_destructor (drivers/tty/tty_port.c:296)
tty_port_put (drivers/tty/tty_port.c:312)
vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2))
vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)
tty_ioctl (drivers/tty/tty_io.c:2778)
...
The buggy address belongs to the object at ffff8880beab8800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00)
The buggy address belongs to the physical page:
page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0xbeab8
head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0
pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: pm33xx: Fix refcount leak in am33xx_pm_probe
wkup_m3_ipc_get() takes refcount, which should be freed by
wkup_m3_ipc_put(). Add missing refcount release in the error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidraw: fix data race on device refcount
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b02 ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
Resolves a panic that can occur on AMD systems, typically during host
shutdown, after the PTDMA driver had been exercised. The issue was
the pt_issue_pending() function is mistakenly assuming that there will
be at least one descriptor in the Submitted queue when the function
is called. However, it is possible that both the Submitted and Issued
queues could be empty, which could result in pt_cmd_callback() being
mistakenly called with a NULL pointer.
Ref: Bugzilla Bug 216856. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix device use-after-free on unbind
A recent change fixed device reference leaks when looking up drm
platform device driver data during bind() but failed to remove a partial
fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix
kobject put for component sub-drivers").
This results in a reference imbalance on component bind() failures and
on unbind() which could lead to a user-after-free.
Make sure to only drop the references after retrieving the driver data
by effectively reverting the previous partial fix.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
When if_type equals zero and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns false, drbl_regs_memmap_p is not remapped. This passes a NULL
pointer to iounmap(), which can trigger a WARN() on certain arches.
When if_type equals six and pci_resource_start(pdev, PCI_64BIT_BAR4)
returns true, drbl_regs_memmap_p may has been remapped and
ctrl_regs_memmap_p is not remapped. This is a resource leak and passes a
NULL pointer to iounmap().
To fix these issues, we need to add null checks before iounmap(), and
change some goto labels. |
