| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find()
nf_osf_find() incorrectly returns true on mismatch, this leads to
copying uninitialized memory area in nft_osf which can be used to leak
stale kernel stack data to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING
syzbot reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.
This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.
syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
KMSAN reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was stored to memory at:
virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was created at:
slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================
The following simple reproducer can cause the issue described above:
int main(void)
{
int sock;
struct sockaddr_vm addr = {
.svm_family = AF_VSOCK,
.svm_cid = VMADDR_CID_ANY,
.svm_port = 1234,
};
sock = socket(AF_VSOCK, SOCK_STREAM, 0);
connect(sock, (struct sockaddr *)&addr, sizeof(addr));
return 0;
}
This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
syzbot reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737
usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032
usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241
usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554
hub_port_connect drivers/usb/core/hub.c:5208 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5348 [inline]
port_event drivers/usb/core/hub.c:5494 [inline]
hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576
process_one_work+0x1688/0x2140 kernel/workqueue.c:2269
worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415
kthread+0x551/0x590 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
Local variable ----buf.i87@smsc75xx_bind created at:
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
This issue is caused because usbnet_read_cmd() reads less bytes than requested
(zero byte in the reproducer). In this case, 'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested. |
| In the Linux kernel, the following vulnerability has been resolved:
inet_diag: fix kernel-infoleak for UDP sockets
KMSAN reported a kernel-infoleak [1], that can exploited
by unpriv users.
After analysis it turned out UDP was not initializing
r->idiag_expires. Other users of inet_sk_diag_fill()
might make the same mistake in the future, so fix this
in inet_sk_diag_fill().
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:156 [inline]
_copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
copy_to_iter include/linux/uio.h:155 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline]
netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974
sock_recvmsg_nosec net/socket.c:944 [inline]
sock_recvmsg net/socket.c:962 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1035
call_read_iter include/linux/fs.h:2156 [inline]
new_sync_read fs/read_write.c:400 [inline]
vfs_read+0x1631/0x1980 fs/read_write.c:481
ksys_read+0x28c/0x520 fs/read_write.c:619
__do_sys_read fs/read_write.c:629 [inline]
__se_sys_read fs/read_write.c:627 [inline]
__x64_sys_read+0xdb/0x120 fs/read_write.c:627
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x63f/0xe30 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 312 are uninitialized
Memory access of size 312 starts at ffff88812ab54000
Data copied to user address 0000000020001440
CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mxl111sf: change mutex_init() location
Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.
Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:
dvb_usbv2_init()
dvb_usbv2_adapter_init()
dvb_usbv2_adapter_frontend_init()
props->frontend_attach()
props->init()
Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim: avoid putting an uninitialized iova_domain
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
syzbot reported access to unitialized memory in mbind() [1]
Issue came with commit bda420b98505 ("numa balancing: migrate on fault
among multiple bound nodes")
This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid
combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in
do_set_mempolicy()
This patch moves the check in sanitize_mpol_flags() so that it is also
used by mbind()
[1]
BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_alloc_node mm/slub.c:3221 [inline]
slab_alloc mm/slub.c:3230 [inline]
kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235
mpol_new mm/mempolicy.c:293 [inline]
do_mbind+0x912/0x15f0 mm/mempolicy.c:1289
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
=====================================================
Kernel panic - not syncing: panic_on_kmsan set ...
CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106
dump_stack+0x25/0x28 lib/dump_stack.c:113
panic+0x44f/0xdeb kernel/panic.c:232
kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186
__msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix uninit-value in caif_seqpkt_sendmsg
When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.
=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
___sys_sendmsg net/socket.c:2397 [inline]
__sys_sendmmsg+0x808/0xc90 net/socket.c:2480
__compat_sys_sendmmsg net/compat.c:656 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: put off calling register_netdev() until client initialize complete
Currently, the netdevice is registered before client initializing
complete. So there is a timewindow between netdevice available
and usable. In this case, if user try to change the channel number
or ring param, it may cause the hns3_set_rx_cpu_rmap() being called
twice, and report bug.
[47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0
[47199.430340] hns3 0000:35:00.0 eth1: already uninitialized
[47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1
[47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1
[47200.163524] ------------[ cut here ]------------
[47200.171674] kernel BUG at lib/cpu_rmap.c:142!
[47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge]
[47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1
[47200.215601] Hardware name: , xxxxxx 02/04/2021
[47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[47200.230188] pc : cpu_rmap_add+0x38/0x40
[47200.237472] lr : irq_cpu_rmap_add+0x84/0x140
[47200.243291] sp : ffff800010e93a30
[47200.247295] x29: ffff800010e93a30 x28: ffff082100584880
[47200.254155] x27: 0000000000000000 x26: 0000000000000000
[47200.260712] x25: 0000000000000000 x24: 0000000000000004
[47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0
[47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680
[47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0
[47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0
[47200.293456] x15: fffffc2082990600 x14: dead000000000122
[47200.300059] x13: ffffffffffffffff x12: 000000000000003e
[47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000
[47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700
[47200.319682] x7 : 0000000000000000 x6 : 000000000000003f
[47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20
[47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80
[47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004
[47200.346058] Call trace:
[47200.349324] cpu_rmap_add+0x38/0x40
[47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3]
[47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3]
[47200.370049] hns3_change_channels+0x40/0xb0 [hns3]
[47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3]
[47200.383353] ethtool_set_channels+0x140/0x250
[47200.389772] dev_ethtool+0x714/0x23d0
[47200.394440] dev_ioctl+0x4cc/0x640
[47200.399277] sock_do_ioctl+0x100/0x2a0
[47200.404574] sock_ioctl+0x28c/0x470
[47200.409079] __arm64_sys_ioctl+0xb4/0x100
[47200.415217] el0_svc_common.constprop.0+0x84/0x210
[47200.422088] do_el0_svc+0x28/0x34
[47200.426387] el0_svc+0x28/0x70
[47200.431308] el0_sync_handler+0x1a4/0x1b0
[47200.436477] el0_sync+0x174/0x180
[47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000)
[47200.448869] ---[ end trace a01efe4ce42e5f34 ]---
The process is like below:
excuting hns3_client_init
|
register_netdev()
| hns3_set_channels()
| |
hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet()
| |
| quit without calling function
| hns3_free_rx_cpu_rmap for flag
| HNS3_NIC_STATE_INITED is unset.
| |
| hns3_reset_notify_init_enet()
| |
set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash
Fix it by calling register_netdev() at the end of function
hns3_client_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
asix: fix uninit-value in asix_mdio_read()
asix_read_cmd() may read less than sizeof(smsr) bytes and in this case
smsr will be uninitialized.
Fail log:
BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline]
BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497
BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497
asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline]
asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497
asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init
ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.
[ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.180345] Call Trace:
[ 7.182576] mutex_lock+0xc9/0xd0
[ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf] |
| Windows Mobile Hotspot Information Disclosure Vulnerability |
| Microsoft Local Security Authority Subsystem Service Information Disclosure Vulnerability |
| In isp, there is a possible out of bounds write due to uninitialized data. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07341258; Issue ID: ALPS07341258. |
| In ccd, there is a possible out of bounds write due to uninitialized data. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07326559; Issue ID: ALPS07326559. |
| Adobe Prelude version 10.0 (and earlier) are affected by an uninitialized variable vulnerability when parsing a specially crafted file. An unauthenticated attacker could leverage this vulnerability to disclose arbitrary memory information in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| h2o is an open source http server. In code prior to the `8c0eca3` commit h2o may attempt to access uninitialized memory. When receiving QUIC frames in certain order, HTTP/3 server-side implementation of h2o can be misguided to treat uninitialized memory as HTTP/3 frames that have been received. When h2o is used as a reverse proxy, an attacker can abuse this vulnerability to send internal state of h2o to backend servers controlled by the attacker or third party. Also, if there is an HTTP endpoint that reflects the traffic sent from the client, an attacker can use that reflector to obtain internal state of h2o. This internal state includes traffic of other connections in unencrypted form and TLS session tickets. This vulnerability exists in h2o server with HTTP/3 support, between commit 93af138 and d1f0f65. None of the released versions of h2o are affected by this vulnerability. There are no known workarounds. Users of unreleased versions of h2o using HTTP/3 are advised to upgrade immediately. |
| Trilogy is a client library for MySQL. When authenticating, a malicious server could return a specially crafted authentication packet, causing the client to read and return up to 12 bytes of data from an uninitialized variable in stack memory. Users of the trilogy gem should upgrade to version 2.1.1 This issue can be avoided by only connecting to trusted servers. |
| Scylla is a real-time big data database that is API-compatible with Apache Cassandra and Amazon DynamoDB. When decompressing CQL frame received from user, Scylla assumes that user-provided uncompressed length is correct. If user provides fake length, that is greater than the real one, part of decompression buffer won't be overwritten, and will be left uninitialized. This can be exploited in several ways, depending on the privileges of the user. 1. The main exploit is that an attacker with access to CQL port, but no user account, can bypass authentication, but only if there are other legitimate clients making connections to the cluster, and they use LZ4. 2. Attacker that already has a user account on the cluster can read parts of uninitialized memory, which can contain things like passwords of other users or fragments of other queries / results, which leads to authorization bypass and sensitive information disclosure. The bug has been patched in the following versions: Scylla Enterprise: 2020.1.14, 2021.1.12, 2022.1.0. Scylla Open Source: 4.6.7, 5.0.3. Users unable to upgrade should make sure none of their drivers connect to cluster using LZ4 compression, and that Scylla CQL port is behind firewall. Additionally make sure no untrusted client can connect to Scylla, by setting up authentication and applying workarounds from previous point (firewall, no lz4 compression). |
