| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenFGA is an authorization/permission engine. Prior to version 0.2.4, the `streamed-list-objects` endpoint was not validating the authorization header, resulting in disclosure of objects in the store. Users `openfga/openfga` versions 0.2.3 and prior who are exposing the OpenFGA service to the internet are vulnerable. Version 0.2.4 contains a patch for this issue. |
| OpenFGA is an authorization/permission engine. Versions prior to version 0.2.4 are vulnerable to authorization bypass under certain conditions. Users who have wildcard (`*`) defined on tupleset relations in their authorization model are vulnerable. Version 0.2.4 contains a patch for this issue. |
| OpenFGA is an authorization/permission engine. Versions prior to version 0.2.4 are vulnerable to authorization bypass under certain conditions. Users whose model has a relation defined as a tupleset (the right hand side of a ‘from’ statement) that involves anything other than a direct relationship (e.g. ‘as self’) are vulnerable. Version 0.2.4 contains a patch for this issue. |
| Discourse Patreon enables syncronization between Discourse Groups and Patreon rewards. On sites with Patreon login enabled, an improper authentication vulnerability could be used to take control of a victim's forum account. This vulnerability is patched in commit number 846d012151514b35ce42a1636c7d70f6dcee879e of the discourse-patreon plugin. Out of an abundance of caution, any Discourse accounts which have logged in with an unverified-email Patreon account will be logged out and asked to verify their email address on their next login. As a workaround, disable the patreon integration and log out all users with associated Patreon accounts. |
| Metabase is data visualization software. Prior to versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, 1.42.6, 0.41.9, and 1.41.9 single sign on (SSO) users were able to do password resets on Metabase, which could allow a user access without going through the SSO IdP. This issue is patched in versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, 1.42.6, 0.41.9, and 1.41.9. Metabase now blocks password reset for all users who use SSO for their Metabase login. |
| Nextcloud Server is the file server software for Nextcloud, a self-hosted productivity platform. Nextcloud Server and Nextcloud Enterprise Server prior to versions 23.0.9 and 24.0.5 are vulnerable to exposure of information that cannot be controlled by administrators without direct database access. Versions 23.0.9 and 24.0.5 contains patches for this issue. No known workarounds are available. |
| Discourse is a platform for community discussion. Users who receive an invitation link that is not scoped to a single email address can enter any non-admin user's email and gain access to their account when accepting the invitation. All users should upgrade to the latest version. A workaround is temporarily disabling invitations with `SiteSetting.max_invites_per_day = 0` or scope them to individual email addresses. |
| GLPI stands for Gestionnaire Libre de Parc Informatique. GLPI is a Free Asset and IT Management Software package that provides ITIL Service Desk features, licenses tracking and software auditing. Connected users may gain access to debug panel through the GLPI update script. This issue has been patched, please upgrade to 10.0.4. As a workaround, delete the `install/update.php` script. |
| XWiki OIDC has various tools to manipulate OpenID Connect protocol in XWiki. Prior to version 1.29.1, even if a wiki has an OpenID provider configured through its xwiki.properties, it is possible to provide a third party provider its details through request parameters. One can then bypass the XWiki authentication altogether by specifying its own provider through the oidc.endpoint.* request parameters (or by using an XWiki-based OpenID provider with oidc.xwikiprovider. With the same approach, one could also provide a specific group mapping through oidc.groups.mapping that would make his user automatically part of the XWikiAdminGroup. This issue has been patched, please upgrade to 1.29.1. There is no workaround, an upgrade of the authenticator is required. |
| The crewjam/saml go library prior to version 0.4.9 is vulnerable to an authentication bypass when processing SAML responses containing multiple Assertion elements. This issue has been corrected in version 0.4.9. There are no workarounds other than upgrading to a fixed version. |
| Nextcloud Server is an open source personal cloud server. Prior to versions 24.0.7 and 25.0.1, disabled download shares still allow download through preview images. Images could be downloaded and previews of documents (first page) can be downloaded without being watermarked. Versions 24.0.7 and 25.0.1 contain a fix for this issue. No known workarounds are available. |
| authentik is an open-source identity provider. Versions prior to 2022.11.2 and 2022.10.2 are vulnerable to unauthorized user creation and potential account takeover. With the default flows, unauthenticated users can create new accounts in authentik. If a flow exists that allows for email-verified password recovery, this can be used to overwrite the email address of admin accounts and take over their accounts. authentik 2022.11.2 and 2022.10.2 fix this issue. As a workaround, a policy can be created and bound to the `default-user-settings-flow flow` with the contents `return request.user.is_authenticated`. |
| Sentry is an error tracking and performance monitoring platform. In versions of the sentry python library prior to 22.11.0 an attacker with a known valid invite link could manipulate a cookie to allow the same invite link to be reused on multiple accounts when joining an organization. As a result an attacker with a valid invite link can create multiple users and join an organization they may not have been originally invited to. This issue was patched in version 22.11.0. Sentry SaaS customers do not need to take action. Self-hosted Sentry installs on systems which can not upgrade can disable the invite functionality until they are ready to deploy the patched version by editing their `sentry.conf.py` file (usually located at `~/.sentry/`).
|
| Passport-wsfed-saml2 is a ws-federation protocol and SAML2 tokens authentication provider for Passport. In versions prior to 4.6.3, a remote attacker may be able to bypass WSFed authentication on a website using passport-wsfed-saml2. A successful attack requires that the attacker is in possession of an arbitrary IDP signed assertion. Depending on the IDP used, fully unauthenticated attacks (e.g without access to a valid user) might also be feasible if generation of a signed message can be triggered. This issue is patched in version 4.6.3. Use of SAML2 authentication instead of WSFed is a workaround. |
| An access control issue in Tenda A18 v15.13.07.09 allows unauthenticated attackers to access the Telnet service. |
| Authentication bypass vulnerability in multiple Buffalo network devices allows a network-adjacent attacker to bypass authentication and access the device. The affected products/versions are as follows: WCR-300 firmware Ver. 1.87 and earlier, WHR-HP-G300N firmware Ver. 2.00 and earlier, WHR-HP-GN firmware Ver. 1.87 and earlier, WPL-05G300 firmware Ver. 1.88 and earlier, WRM-D2133HP firmware Ver. 2.85 and earlier, WRM-D2133HS firmware Ver. 2.96 and earlier, WTR-M2133HP firmware Ver. 2.85 and earlier, WTR-M2133HS firmware Ver. 2.96 and earlier, WXR-1900DHP firmware Ver. 2.50 and earlier, WXR-1900DHP2 firmware Ver. 2.59 and earlier, WXR-1900DHP3 firmware Ver. 2.63 and earlier, WXR-5950AX12 firmware Ver. 3.40 and earlier, WXR-6000AX12B firmware Ver. 3.40 and earlier, WXR-6000AX12S firmware Ver. 3.40 and earlier, WZR-300HP firmware Ver. 2.00 and earlier, WZR-450HP firmware Ver. 2.00 and earlier, WZR-600DHP firmware Ver. 2.00 and earlier, WZR-900DHP firmware Ver. 1.15 and earlier, WZR-1750DHP2 firmware Ver. 2.31 and earlier, WZR-HP-AG300H firmware Ver. 1.76 and earlier, WZR-HP-G302H firmware Ver. 1.86 and earlier, WEM-1266 firmware Ver. 2.85 and earlier, WEM-1266WP firmware Ver. 2.85 and earlier, WLAE-AG300N firmware Ver. 1.86 and earlier, FS-600DHP firmware Ver. 3.40 and earlier, FS-G300N firmware Ver. 3.14 and earlier, FS-HP-G300N firmware Ver. 3.33 and earlier, FS-R600DHP firmware Ver. 3.40 and earlier, BHR-4GRV firmware Ver. 2.00 and earlier, DWR-HP-G300NH firmware Ver. 1.84 and earlier, DWR-PG firmware Ver. 1.83 and earlier, HW-450HP-ZWE firmware Ver. 2.00 and earlier, WER-A54G54 firmware Ver. 1.43 and earlier, WER-AG54 firmware Ver. 1.43 and earlier, WER-AM54G54 firmware Ver. 1.43 and earlier, WER-AMG54 firmware Ver. 1.43 and earlier, WHR-300 firmware Ver. 2.00 and earlier, WHR-300HP firmware Ver. 2.00 and earlier, WHR-AM54G54 firmware Ver. 1.43 and earlier, WHR-AMG54 firmware Ver. 1.43 and earlier, WHR-AMPG firmware Ver. 1.52 and earlier, WHR-G firmware Ver. 1.49 and earlier, WHR-G300N firmware Ver. 1.65 and earlier, WHR-G301N firmware Ver. 1.87 and earlier, WHR-G54S firmware Ver. 1.43 and earlier, WHR-G54S-NI firmware Ver. 1.24 and earlier, WHR-HP-AMPG firmware Ver. 1.43 and earlier, WHR-HP-G firmware Ver. 1.49 and earlier, WHR-HP-G54 firmware Ver. 1.43 and earlier, WLI-H4-D600 firmware Ver. 1.88 and earlier, WS024BF firmware Ver. 1.60 and earlier, WS024BF-NW firmware Ver. 1.60 and earlier, WXR-1750DHP firmware Ver. 2.60 and earlier, WXR-1750DHP2 firmware Ver. 2.60 and earlier, WZR-1166DHP firmware Ver. 2.18 and earlier, WZR-1166DHP2 firmware Ver. 2.18 and earlier, WZR-1750DHP firmware Ver. 2.30 and earlier, WZR2-G300N firmware Ver. 1.55 and earlier, WZR-450HP-CWT firmware Ver. 2.00 and earlier, WZR-450HP-UB firmware Ver. 2.00 and earlier, WZR-600DHP2 firmware Ver. 1.15 and earlier, WZR-600DHP3 firmware Ver. 2.19 and earlier, WZR-900DHP2 firmware Ver. 2.19 and earlier, WZR-AGL300NH firmware Ver. 1.55 and earlier, WZR-AMPG144NH firmware Ver. 1.49 and earlier, WZR-AMPG300NH firmware Ver. 1.51 and earlier, WZR-D1100H firmware Ver. 2.00 and earlier, WZR-G144N firmware Ver. 1.48 and earlier, WZR-G144NH firmware Ver. 1.48 and earlier, WZR-HP-G300NH firmware Ver. 1.84 and earlier, WZR-HP-G301NH firmware Ver. 1.84 and earlier, WZR-HP-G450H firmware Ver. 1.90 and earlier, WZR-S1750DHP firmware Ver. 2.32 and earlier, WZR-S600DHP firmware Ver. 2.19 and earlier, and WZR-S900DHP firmware Ver. 2.19 and earlier. |
| Vulnerabilities in the AirWave Management Platform web-based management interface exist which expose some URLs to a lack of proper access controls. These vulnerabilities could allow a remote attacker with limited privileges to gain access to sensitive information and/or change network configurations with privileges at a higher effective level in Aruba AirWave Management Platform version(s): 8.2.15.0 and below.
|
| Vulnerabilities in the AirWave Management Platform web-based management interface exist which expose some URLs to a lack of proper access controls. These vulnerabilities could allow a remote attacker with limited privileges to gain access to sensitive information and/or change network configurations with privileges at a higher effective level in Aruba AirWave Management Platform version(s): 8.2.15.0 and below.
|
| Vulnerabilities in the AirWave Management Platform web-based management interface exist which expose some URLs to a lack of proper access controls. These vulnerabilities could allow a remote attacker with limited privileges to gain access to sensitive information and/or change network configurations with privileges at a higher effective level in Aruba AirWave Management Platform version(s): 8.2.15.0 and below.
|
| The BD BodyGuard™ infusion pumps specified allow for access through the RS-232 (serial) port interface. If exploited, threat actors with physical access, specialized equipment and knowledge may be able to configure or disable the pump. No electronic protected health information (ePHI), protected health information (PHI) or personally identifiable information (PII) is stored in the pump. |
