| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: Fix deadlocks with kctl removals at disconnection
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now. |
| In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the phar uncompressor code would recursively uncompress "quines" gzip files, resulting in an infinite loop. |
| An improper input neutralization vulnerability in the management web interface of the Palo Alto Networks PAN-OS® software enables a malicious authenticated read-write administrator to impersonate another legitimate authenticated PAN-OS administrator.
The attacker must have network access to the management web interface to exploit this issue. You greatly reduce the risk of this issue by restricting access to the management web interface to only trusted internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . |
| A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code. |
| The IFrame widget in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 6, 7.2 before fix pack 19, and older unsupported versions does not check the URL of the IFrame, which allows remote authenticated users to cause a denial-of-service (DoS) via a self referencing IFrame. |
| An external attacker is able to send a specially crafted email (with many recipients) and trigger a potential DoS of the system |
| Jenkins Pipeline: Stage View Plugin 2.26 and earlier does not correctly encode the ID of 'input' steps when using it to generate URLs to proceed or abort Pipeline builds, allowing attackers able to configure Pipelines to specify 'input' step IDs resulting in URLs that would bypass the CSRF protection of any target URL in Jenkins. |
| Jenkins Pipeline: Input Step Plugin 451.vf1a_a_4f405289 and earlier does not restrict or sanitize the optionally specified ID of the 'input' step, which is used for the URLs that process user interactions for the given 'input' step (proceed or abort) and is not correctly encoded, allowing attackers able to configure Pipelines to have Jenkins build URLs from 'input' step IDs that would bypass the CSRF protection of any target URL in Jenkins when the 'input' step is interacted with. |
| ModularSquareRoot in Crypto++ (aka cryptopp) through 8.9.0 allows attackers to cause a denial of service (infinite loop) via crafted DER public-key data associated with squared odd numbers, such as the square of 268995137513890432434389773128616504853. |
| CodeIgniter is a PHP full-stack web framework A vulnerability was found in the Language class that allowed DoS attacks. This vulnerability can be exploited by an attacker to consume a large amount of memory on the server. Upgrade to v4.4.7 or later.
|
| FiveCo RAP dissector infinite loop in Wireshark 4.4.0 to 4.4.1 and 4.2.0 to 4.2.8 allows denial of service via packet injection or crafted capture file |
| Attackers can create long chains of CAs that would lead to OctoRPKI exceeding its max iterations parameter. In consequence it would cause the program to crash, preventing it from finishing the validation and leading to a denial of service. Credits to Donika Mirdita and Haya Shulman - Fraunhofer SIT, ATHENE, who discovered and reported this vulnerability.
|
| xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context. |
| Junrar is an open source java RAR archive library. In affected versions A carefully crafted RAR archive can trigger an infinite loop while extracting said archive. The impact depends solely on how the application uses the library, and whether files can be provided by malignant users. The problem is patched in 7.4.1. There are no known workarounds and users are advised to upgrade as soon as possible. |
| In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections. |
| Issue summary: Checking excessively long DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_check(), DH_check_ex()
or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long
delays. Where the key or parameters that are being checked have been obtained
from an untrusted source this may lead to a Denial of Service.
The function DH_check() performs various checks on DH parameters. After fixing
CVE-2023-3446 it was discovered that a large q parameter value can also trigger
an overly long computation during some of these checks. A correct q value,
if present, cannot be larger than the modulus p parameter, thus it is
unnecessary to perform these checks if q is larger than p.
An application that calls DH_check() and supplies a key or parameters obtained
from an untrusted source could be vulnerable to a Denial of Service attack.
The function DH_check() is itself called by a number of other OpenSSL functions.
An application calling any of those other functions may similarly be affected.
The other functions affected by this are DH_check_ex() and
EVP_PKEY_param_check().
Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications
when using the "-check" option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with
small possibility, the root cause is exactly the same as commit
bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
However, Dan reported another hang after that, and junxiao investigated
the problem and found out that this is caused by plugged bio can't issue
from raid5d().
Current implementation in raid5d() has a weird dependence:
1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear
MD_SB_CHANGE_PENDING;
2) raid5d() handles IO in a deadloop, until all IO are issued;
3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared;
This behaviour is introduce before v2.6, and for consequence, if other
context hold 'reconfig_mutex', and md_check_recovery() can't update
super_block, then raid5d() will waste one cpu 100% by the deadloop, until
'reconfig_mutex' is released.
Refer to the implementation from raid1 and raid10, fix this problem by
skipping issue IO if MD_SB_CHANGE_PENDING is still set after
md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex'
is released. Meanwhile, the hang problem will be fixed as well. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential panic during recovery
During recovery, if FAULT_BLOCK is on, it is possible that
f2fs_reserve_new_block() will return -ENOSPC during recovery,
then it may trigger panic.
Also, if fault injection rate is 1 and only FAULT_BLOCK fault
type is on, it may encounter deadloop in loop of block reservation.
Let's change as below to fix these issues:
- remove bug_on() to avoid panic.
- limit the loop count of block reservation to avoid potential
deadloop. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
This reverts commit 1a1975551943f681772720f639ff42fbaa746212.
This commit causes interrupts to be lost for FCoE devices, since it changed
sping locks from "bh" to "irqsave".
Instead, a work queue should be used, and will be addressed in a separate
commit. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: af_bluetooth: Fix deadlock
Attemting to do sock_lock on .recvmsg may cause a deadlock as shown
bellow, so instead of using sock_sock this uses sk_receive_queue.lock
on bt_sock_ioctl to avoid the UAF:
INFO: task kworker/u9:1:121 blocked for more than 30 seconds.
Not tainted 6.7.6-lemon #183
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__schedule+0x37d/0xa00
schedule+0x32/0xe0
__lock_sock+0x68/0xa0
? __pfx_autoremove_wake_function+0x10/0x10
lock_sock_nested+0x43/0x50
l2cap_sock_recv_cb+0x21/0xa0
l2cap_recv_frame+0x55b/0x30a0
? psi_task_switch+0xeb/0x270
? finish_task_switch.isra.0+0x93/0x2a0
hci_rx_work+0x33a/0x3f0
process_one_work+0x13a/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe0/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK> |
