| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix error handling of scsi_host_alloc()
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix
some resource leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: advansys: Fix kernel pointer leak
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %lx to %p to print the hashed pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: Unregister clocks/resets when unbinding
Currently, unbinding a CCU driver unmaps the device's MMIO region, while
leaving its clocks/resets and their providers registered. This can cause
a page fault later when some clock operation tries to perform MMIO. Fix
this by separating the CCU initialization from the memory allocation,
and then using a devres callback to unregister the clocks and resets.
This also fixes a memory leak of the `struct ccu_reset`, and uses the
correct owner (the specific platform driver) for the clocks and resets.
Early OF clock providers are never unregistered, and limited error
handling is possible, so they are mostly unchanged. The error reporting
is made more consistent by moving the message inside of_sunxi_ccu_probe. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm80xx: Fix memory leak during rmmod
Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.
Properly free memory when the module is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in ext4_mb_init_backend on error path.
Fix a memory leak discovered by syzbot when a file system is corrupted
with an illegally large s_log_groups_per_flex. |
| An issue was discovered in Wekan The Open Source kanban board system up to version 18.15, fixed in 18.16. Attachment upload API treats the Authorization bearer value as a userId and enters a non-terminating body-handling branch for any non-empty bearer token, enabling trivial application-layer DoS and latent identity-spoofing. |
| A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability. |
| xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak. |
| Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability |
| Internet Connection Sharing (ICS) Denial of Service Vulnerability |
| Windows Active Directory Domain Services API Denial of Service Vulnerability |
| The issue was addressed with improved memory handling. This issue is fixed in tvOS 26.1, watchOS 26.1, macOS Tahoe 26.1, iOS 26.1 and iPadOS 26.1, visionOS 26.1. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Add job to pending list if the reset was skipped
When a CL/CSD job times out, we check if the GPU has made any progress
since the last timeout. If so, instead of resetting the hardware, we skip
the reset and let the timer get rearmed. This gives long-running jobs a
chance to complete.
However, when `timedout_job()` is called, the job in question is removed
from the pending list, which means it won't be automatically freed through
`free_job()`. Consequently, when we skip the reset and keep the job
running, the job won't be freed when it finally completes.
This situation leads to a memory leak, as exposed in [1] and [2].
Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when
GPU is still active"), this patch ensures the job is put back on the
pending list when extending the timeout. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
Memory allocated for idxd is not freed if an error occurs during
idxd_alloc(). To fix it, free the allocated memory in the reverse order
of allocation before exiting the function in case of an error. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: fix a potential crash on gso_skb handling
SFQ has an assumption of always being able to queue at least one packet.
However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.
Fix sfq_drop() to properly clear q->tail in this situation.
ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100
ip netns exec lb netserver
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 & |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix udp gso skb_segment after pull from frag_list
Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after
pull from frag_list") detected invalid geometry in frag_list skbs and
redirects them from skb_segment_list to more robust skb_segment. But some
packets with modified geometry can also hit bugs in that code. We don't
know how many such cases exist. Addressing each one by one also requires
touching the complex skb_segment code, which risks introducing bugs for
other types of skbs. Instead, linearize all these packets that fail the
basic invariants on gso fraglist skbs. That is more robust.
If only part of the fraglist payload is pulled into head_skb, it will
always cause exception when splitting skbs by skb_segment. For detailed
call stack information, see below.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify fraglist skbs, breaking these invariants.
In extreme cases they pull one part of data into skb linear. For UDP,
this causes three payloads with lengths of (11,11,10) bytes were
pulled tail to become (12,10,10) bytes.
The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because
payload was pulled into head_skb, it needs to be linearized before pass
to regular skb_segment.
skb_segment+0xcd0/0xd14
__udp_gso_segment+0x334/0x5f4
udp4_ufo_fragment+0x118/0x15c
inet_gso_segment+0x164/0x338
skb_mac_gso_segment+0xc4/0x13c
__skb_gso_segment+0xc4/0x124
validate_xmit_skb+0x9c/0x2c0
validate_xmit_skb_list+0x4c/0x80
sch_direct_xmit+0x70/0x404
__dev_queue_xmit+0x64c/0xe5c
neigh_resolve_output+0x178/0x1c4
ip_finish_output2+0x37c/0x47c
__ip_finish_output+0x194/0x240
ip_finish_output+0x20/0xf4
ip_output+0x100/0x1a0
NF_HOOK+0xc4/0x16c
ip_forward+0x314/0x32c
ip_rcv+0x90/0x118
__netif_receive_skb+0x74/0x124
process_backlog+0xe8/0x1a4
__napi_poll+0x5c/0x1f8
net_rx_action+0x154/0x314
handle_softirqs+0x154/0x4b8
[118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278!
[118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000
[118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000
[118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO)
[118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14
[118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14
[118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770 |
| Jenkins 2.540 and earlier, LTS 2.528.2 and earlier does not properly close HTTP-based CLI connections when the connection stream becomes corrupted, allowing unauthenticated attackers to cause a denial of service. |
| In onHeaderDecoded of LocalImageResolver.java, there is a possible persistent denial of service due to resource exhaustion. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In getComponentName of MediaButtonReceiverHolder.java, there is a possible desync in persistence due to resource exhaustion. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
