| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| After receiving a
malformed 802.15.4 MAC Data Request
the Zigbee Coordinator sends a ‘network leave’ request to Zigbee router resulting in the Zigbee Router getting stuck in a non-rejoinable state. If a suitable parent is not available, the end devices will be unable to rejoin. A manual recommissioning is required to recover the Zigbee Router. |
| Rapid7 InsightVM versions before 8.34.0 contain a signature verification issue on the Assertion Consumer Service (ACS) cloud endpoint that could allow an attacker to gain unauthorized access to InsightVM accounts setup
via "Security Console" installations, resulting in full account takeover. The issue occurs due to the application processing these unsigned assertions and issuing session cookies that granted access to the
targeted user accounts. This has been fixed in version 8.34.0 of InsightVM. |
| A vulnerability has been found in bolo-blog bolo-solo up to 2.6.4. This impacts the function importFromCnblogs of the file src/main/java/org/b3log/solo/bolo/prop/BackupService.java of the component Filename Handler. The manipulation of the argument File leads to path traversal. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in bolo-blog bolo-solo up to 2.6.4. The impacted element is the function unpackFilteredZip of the file src/main/java/org/b3log/solo/bolo/prop/BackupService.java of the component ZIP File Handler. Performing a manipulation of the argument File results in path traversal. The attack is possible to be carried out remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in Ziroom ZHOME A0101 1.0.1.0. Impacted is an unknown function of the component Dropbear SSH Service. This manipulation causes use of default credentials. Remote exploitation of the attack is possible. The complexity of an attack is rather high. The exploitability is considered difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Ziroom ZHOME A0101 1.0.1.0. This issue affects the function macAddrClone of the file luci\controller\api\zrMacClone.lua. The manipulation of the argument macType results in command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a remotely triggerable Out-of-Memory (OOM) denial-of-service exists in Fast
-DDS when processing RTPS GAP submessages under RELIABLE QoS. By sending a tiny GAP packet with a huge gap range (`gapList
.base - gapStart`), an attacker drives `StatefulReader::processGapMsg()` into an unbounded loop that inserts millions of s
equence numbers into `WriterProxy::changes_received_` (`std::set`), causing multi-GB heap growth and process termination.
No authentication is required beyond network reachability to the reader on the DDS domain. In environments without an RSS
limit (non-ASan / unlimited), memory consumption was observed to rise to ~64 GB. Versions 3.4.1, 3.3.1, and 2.6.11 patch t
he issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specifically by ta
mpering with the the `vecsize` value read by `readOctetVector` — a 32-bit integer overflow can occur, causing `std::vector
::resize` to request an attacker-controlled size and quickly trigger OOM and remote process termination. Versions 3.4.1, 3
.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a heap buffer overflow exists in the Fast-DDS DATA_FRAG receive path. An un
authenticated sender can transmit a single malformed RTPS DATA_FRAG packet where `fragmentSize` and `sampleSize` are craft
ed to violate internal assumptions. Due to a 4-byte alignment step during fragment metadata initialization, the code write
s past the end of the allocated payload buffer, causing immediate crash (DoS) and potentially enabling memory corruption (
RCE risk). Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes a heap buffer overflow, resulting in remote termination of Fast-DDS. If the fields
of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specially `readOctetVector`
reads an unchecked `vecsize` that is propagated unchanged into `readData` as the `length` parameter — the attacker-contro
lled `vecsize` can trigger a 32-bit integer overflow during the `length` calculation. That overflow can cause large alloca
tion attempt that quickly leads to OOM, enabling a remotely-triggerable denial-of-service and remote process termination.
Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes a heap buffer overflow, resulting in remote termination of Fast-DDS. If the fields
of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage — specifically by tampering with the `str_size`
value read by `readString` (called from `readBinaryProperty`) — are modified, a 32-bit integer overflow can occur, causing
`std::vector::resize` to use an attacker-controlled size and quickly trigger heap buffer overflow and remote process term
ination. Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length
field in readBinaryPropertySeq — are modified, an integer overflow occurs, leading to an OOM during the resize operation.
Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| Neo4j Enterprise and Community editions versions prior to 2026.01.3 and 5.26.21 are vulnerable to a potential information disclosure by a user who has ability to access the local log files.
The "obfuscate_literals" option in the query logs does not redact error information, exposing unredacted data in the query log when a customer writes a query that fails. It can allow a user with legitimate access to the local log files to obtain information they are not authorised to see. If this user is also in a position to run queries and trigger errors, this vulnerability can potentially help them to infer information they are not authorised to see through their intended database access.
We recommend upgrading to versions 2026.01.3 (or 5.26.21) where the issue is fixed, and reviewing query log files permissions to ensure restricted access. If your configuration had db.logs.query.obfuscate_literals enabled, and you wish the obfuscation to cover the error messages as well, you need to enable the new configuration setting db.logs.query.obfuscate_errors once you have upgraded Neo4j. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tdpserver modules) allows adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a maliciously formed field.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a field whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| IBM Cloud Pak for Business Automation 25.0.0 through 25.0.0 Interim Fix 002, 24.0.1 through 24.0.1 Interim Fix 005, and 24.0.0 through 24.0.0 Interim Fix 007 could allow an authenticated user to cause a denial of service or corrupt existing data due to the improper validation of input length. |
| Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| SSH Hostkey misconfiguration vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows attackers to obtain device credentials through a specially crafted man‑in‑the‑middle (MITM) attack. This could enable unauthorized access if captured credentials are reused.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120. |
| HCL AION is affected by an Autocomplete HTML Attribute Not Disabled for Password Field vulnerability. This can allow autocomplete on password fields may lead to unintended storage or disclosure of sensitive credentials, potentially increasing the risk of unauthorized access. This issue affects AION: 2.0. |
