| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Disable auto-enable of exclusive INTx IRQ
Currently for devices requiring masking at the irqchip for INTx, ie.
devices without DisINTx support, the IRQ is enabled in request_irq()
and subsequently disabled as necessary to align with the masked status
flag. This presents a window where the interrupt could fire between
these events, resulting in the IRQ incrementing the disable depth twice.
This would be unrecoverable for a user since the masked flag prevents
nested enables through vfio.
Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx
is never auto-enabled, then unmask as required. |
| In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Ensure safe user copy of completion record
If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from
event log cache to user triggers a kernel bug.
[ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)!
[ 1987.170845] ------------[ cut here ]------------
[ 1987.176086] kernel BUG at mm/usercopy.c:102!
[ 1987.180946] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ #5
[ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
[ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd]
[ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90
[ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f
[ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246
[ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000
[ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff
[ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff
[ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a
[ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899
[ 1987.284710] FS: 0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000
[ 1987.293850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0
[ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1987.324527] PKRU: 55555554
[ 1987.327622] Call Trace:
[ 1987.330424] <TASK>
[ 1987.332826] ? show_regs+0x6e/0x80
[ 1987.336703] ? die+0x3c/0xa0
[ 1987.339988] ? do_trap+0xd4/0xf0
[ 1987.343662] ? do_error_trap+0x75/0xa0
[ 1987.347922] ? usercopy_abort+0x72/0x90
[ 1987.352277] ? exc_invalid_op+0x57/0x80
[ 1987.356634] ? usercopy_abort+0x72/0x90
[ 1987.360988] ? asm_exc_invalid_op+0x1f/0x30
[ 1987.365734] ? usercopy_abort+0x72/0x90
[ 1987.370088] __check_heap_object+0xb7/0xd0
[ 1987.374739] __check_object_size+0x175/0x2d0
[ 1987.379588] idxd_copy_cr+0xa9/0x130 [idxd]
[ 1987.384341] idxd_evl_fault_work+0x127/0x390 [idxd]
[ 1987.389878] process_one_work+0x13e/0x300
[ 1987.394435] ? __pfx_worker_thread+0x10/0x10
[ 1987.399284] worker_thread+0x2f7/0x420
[ 1987.403544] ? _raw_spin_unlock_irqrestore+0x2b/0x50
[ 1987.409171] ? __pfx_worker_thread+0x10/0x10
[ 1987.414019] kthread+0x107/0x140
[ 1987.417693] ? __pfx_kthread+0x10/0x10
[ 1987.421954] ret_from_fork+0x3d/0x60
[ 1987.426019] ? __pfx_kthread+0x10/0x10
[ 1987.430281] ret_from_fork_asm+0x1b/0x30
[ 1987.434744] </TASK>
The issue arises because event log cache is created using
kmem_cache_create() which is not suitable for user copy.
Fix the issue by creating event log cache with
kmem_cache_create_usercopy(), ensuring safe user copy. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
When using hotplug and bringing up a 32-bit CPU, ask the firmware about the
BTLB information to set up the static (block) TLB entries.
For that write access to the static btlb_info struct is needed, but
since it is marked __ro_after_init the kernel segfaults with missing
write permissions.
Fix the crash by dropping the __ro_after_init annotation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
A DoS tool that injects loads of authentication frames made our AP
crash. The iwl_mvm_is_dup() function couldn't find the per-queue
dup_data which was not allocated.
The root cause for that is that we ran out of stations in the firmware
and we didn't really add the station to the firmware, yet we didn't
return an error to mac80211.
Mac80211 was thinking that we have the station and because of that,
sta_info::uploaded was set to 1. This allowed
ieee80211_find_sta_by_ifaddr() to return a valid station object, but
that ieee80211_sta didn't have any iwl_mvm_sta object initialized and
that caused the crash mentioned earlier when we got Rx on that station. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: xgmac: fix handling of DPP safety error for DMA channels
Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: detect stuck ECSA element in probe resp
We recently added some validation that we don't try to
connect to an AP that is currently in a channel switch
process, since that might want the channel to be quiet
or we might not be able to connect in time to hear the
switching in a beacon. This was in commit c09c4f31998b
("wifi: mac80211: don't connect to an AP while it's in
a CSA process").
However, we promptly got a report that this caused new
connection failures, and it turns out that the AP that
we now cannot connect to is permanently advertising an
extended channel switch announcement, even with quiet.
The AP in question was an Asus RT-AC53, with firmware
3.0.0.4.380_10760-g21a5898.
As a first step, attempt to detect that we're dealing
with such a situation, so mac80211 can use this later. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: improve CSA/ECSA connection refusal
As mentioned in the previous commit, we pretty quickly found
that some APs have ECSA elements stuck in their probe response,
so using that to not attempt to connect while CSA is happening
we never connect to such an AP.
Improve this situation by checking more carefully and ignoring
the ECSA if cfg80211 has previously detected the ECSA element
being stuck in the probe response.
Additionally, allow connecting to an AP that's switching to a
channel it's already using, unless it's using quiet mode. In
this case, we may just have to adjust bandwidth later. If it's
actually switching channels, it's better not to try to connect
in the middle of that. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
- Disallow families other than NFPROTO_{IPV4,IPV6,INET}.
- Disallow layer 4 protocol with no ports, since destination port is a
mandatory attribute for this object. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Patchwork: https://patchwork.freedesktop.org/patch/574878/ |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: disallow anonymous set with timeout flag
Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: rely on mac80211 debugfs handling for vif
mac80211 started to delete debugfs entries in certain cases, causing a
ath11k to crash when it tried to delete the entries later. Fix this by
relying on mac80211 to delete the entries when appropriate and adding
them from the vif_add_debugfs handler. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: huge_memory: don't force huge page alignment on 32 bit
commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries") caused two issues [1] [2] reported on 32 bit system or compat
userspace.
It doesn't make too much sense to force huge page alignment on 32 bit
system due to the constrained virtual address space.
[1] https://lore.kernel.org/linux-mm/d0a136a0-4a31-46bc-adf4-2db109a61672@kernel.org/
[2] https://lore.kernel.org/linux-mm/CAJuCfpHXLdQy1a2B6xN2d7quTYwg2OoZseYPZTRpU0eHHKD-sQ@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: always filter entire AP matrix
The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or
domain is assigned to the mdev. The purpose of the function is to update
the guest's AP configuration by filtering the matrix of adapters and
domains assigned to the mdev. When an adapter or domain is assigned, only
the APQNs associated with the APID of the new adapter or APQI of the new
domain are inspected. If an APQN does not reference a queue device bound to
the vfio_ap device driver, then it's APID will be filtered from the mdev's
matrix when updating the guest's AP configuration.
Inspecting only the APID of the new adapter or APQI of the new domain will
result in passing AP queues through to a guest that are not bound to the
vfio_ap device driver under certain circumstances. Consider the following:
guest's AP configuration (all also assigned to the mdev's matrix):
14.0004
14.0005
14.0006
16.0004
16.0005
16.0006
unassign domain 4
unbind queue 16.0005
assign domain 4
When domain 4 is re-assigned, since only domain 4 will be inspected, the
APQNs that will be examined will be:
14.0004
16.0004
Since both of those APQNs reference queue devices that are bound to the
vfio_ap device driver, nothing will get filtered from the mdev's matrix
when updating the guest's AP configuration. Consequently, queue 16.0005
will get passed through despite not being bound to the driver. This
violates the linux device model requirement that a guest shall only be
given access to devices bound to the device driver facilitating their
pass-through.
To resolve this problem, every adapter and domain assigned to the mdev will
be inspected when filtering the mdev's matrix. |
| In the Linux kernel, the following vulnerability has been resolved:
bfq: Make sure bfqg for which we are queueing requests is online
Bios queued into BFQ IO scheduler can be associated with a cgroup that
was already offlined. This may then cause insertion of this bfq_group
into a service tree. But this bfq_group will get freed as soon as last
bio associated with it is completed leading to use after free issues for
service tree users. Fix the problem by making sure we always operate on
online bfq_group. If the bfq_group associated with the bio is not
online, we pick the first online parent. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Sync efi page table's kernel mappings before switching
The EFI page table is initially created as a copy of the kernel page table.
With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area:
if the stack is allocated in a new PGD (one that was not present at the
moment of the efi page table creation or not synced in a previous vmalloc
fault), the kernel will take a trap when switching to the efi page table
when the vmalloc kernel stack is accessed, resulting in a kernel panic.
Fix that by updating the efi kernel mappings before switching to the efi
page table. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: fix using __this_cpu_add in preemptible
Currently in nf_conntrack_hash_check_insert(), when it fails in
nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the
preemptible context, a call trace can be triggered:
BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636
caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
check_preemption_disabled+0xc3/0xf0
nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink]
ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink]
nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink]
netlink_rcv_skb+0x50/0x100
nfnetlink_rcv+0x65/0x144 [nfnetlink]
netlink_unicast+0x1ae/0x290
netlink_sendmsg+0x257/0x4f0
sock_sendmsg+0x5f/0x70
This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for
nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(),
as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm().
Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is
safe to use NF_CT_STAT_INC(), as it's under local_bh_disable(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/mm: fix incorrect file_map_count for invalid pmd
The page table check trigger BUG_ON() unexpectedly when split hugepage:
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:119!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 7 PID: 210 Comm: transhuge-stres Not tainted 6.1.0-rc3+ #748
Hardware name: linux,dummy-virt (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : page_table_check_set.isra.0+0x398/0x468
lr : page_table_check_set.isra.0+0x1c0/0x468
[...]
Call trace:
page_table_check_set.isra.0+0x398/0x468
__page_table_check_pte_set+0x160/0x1c0
__split_huge_pmd_locked+0x900/0x1648
__split_huge_pmd+0x28c/0x3b8
unmap_page_range+0x428/0x858
unmap_single_vma+0xf4/0x1c8
zap_page_range+0x2b0/0x410
madvise_vma_behavior+0xc44/0xe78
do_madvise+0x280/0x698
__arm64_sys_madvise+0x90/0xe8
invoke_syscall.constprop.0+0xdc/0x1d8
do_el0_svc+0xf4/0x3f8
el0_svc+0x58/0x120
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x19c/0x1a0
[...]
On arm64, pmd_leaf() will return true even if the pmd is invalid due to
pmd_present_invalid() check. So in pmdp_invalidate() the file_map_count
will not only decrease once but also increase once. Then in set_pte_at(),
the file_map_count increase again, and so trigger BUG_ON() unexpectedly.
Add !pmd_present_invalid() check in pmd_user_accessible_page() to fix the
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: fix panic when DSA master device unbinds on shutdown
Rafael reports that on a system with LX2160A and Marvell DSA switches,
if a reboot occurs while the DSA master (dpaa2-eth) is up, the following
panic can be seen:
systemd-shutdown[1]: Rebooting.
Unable to handle kernel paging request at virtual address 00a0000800000041
[00a0000800000041] address between user and kernel address ranges
Internal error: Oops: 96000004 [#1] PREEMPT SMP
CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32
pc : dsa_slave_netdevice_event+0x130/0x3e4
lr : raw_notifier_call_chain+0x50/0x6c
Call trace:
dsa_slave_netdevice_event+0x130/0x3e4
raw_notifier_call_chain+0x50/0x6c
call_netdevice_notifiers_info+0x54/0xa0
__dev_close_many+0x50/0x130
dev_close_many+0x84/0x120
unregister_netdevice_many+0x130/0x710
unregister_netdevice_queue+0x8c/0xd0
unregister_netdev+0x20/0x30
dpaa2_eth_remove+0x68/0x190
fsl_mc_driver_remove+0x20/0x5c
__device_release_driver+0x21c/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x94/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_device_remove+0x24/0x40
__fsl_mc_device_remove+0xc/0x20
device_for_each_child+0x58/0xa0
dprc_remove+0x90/0xb0
fsl_mc_driver_remove+0x20/0x5c
__device_release_driver+0x21c/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_bus_remove+0x80/0x100
fsl_mc_bus_shutdown+0xc/0x1c
platform_shutdown+0x20/0x30
device_shutdown+0x154/0x330
__do_sys_reboot+0x1cc/0x250
__arm64_sys_reboot+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x4c/0x150
el0_svc+0x24/0xb0
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x178/0x17c
It can be seen from the stack trace that the problem is that the
deregistration of the master causes a dev_close(), which gets notified
as NETDEV_GOING_DOWN to dsa_slave_netdevice_event().
But dsa_switch_shutdown() has already run, and this has unregistered the
DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to
call dev_close_many() on those slave interfaces, leading to the problem.
The previous attempt to avoid the NETDEV_GOING_DOWN on the master after
dsa_switch_shutdown() was called seems improper. Unregistering the slave
interfaces is unnecessary and unhelpful. Instead, after the slaves have
stopped being uppers of the DSA master, we can now reset to NULL the
master->dsa_ptr pointer, which will make DSA start ignoring all future
notifier events on the master. |
