| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was detected in libvips 8.19.0. This affects the function vips_bandrank_build of the file libvips/conversion/bandrank.c. Performing a manipulation of the argument index results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit is now public and may be used. The patch is named fd28c5463697712cb0ab116a2c55e4f4d92c4088. It is suggested to install a patch to address this issue. |
| A weakness has been identified in Tenda F453 1.0.0.3. This affects the function fromAddressNat of the file /goform/addressNat of the component httpd. Executing a manipulation of the argument entrys can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. |
| A security flaw has been discovered in Tenda F453 1.0.0.3. Affected by this issue is the function frmL7ProtForm of the file /goform/L7Prot of the component httpd. Performing a manipulation of the argument page results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was determined in Tenda F453 1.0.0.3. Affected is the function fromDhcpListClient of the file /goform/DhcpListClient of the component httpd. This manipulation of the argument page causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was found in Tenda F453 1.0.0.3. This impacts the function fromP2pListFilter of the file /goform/P2pListFilterof of the component httpd. The manipulation of the argument page results in buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. |
| A vulnerability has been found in psi-probe PSI Probe up to 5.3.0. This affects the function lookup of the file psi-probe-core/src/main/java/psiprobe/tools/Whois.java of the component Whois. The manipulation leads to server-side request forgery. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in psi-probe PSI Probe up to 5.3.0. The impacted element is the function handleRequestInternal of the file psi-probe-core/src/main/java/psiprobe/controllers/sessions/ExpireSessionsController.java of the component Session Handler. Executing a manipulation can lead to denial of service. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Phishing Club is a phishing simulation and man-in-the-middle framework. Prior to version 1.30.2, an authenticated SQL injection vulnerability exists in the GetOrphaned recipient listing endpoint in versions prior to v1.30.2. The endpoint constructs a raw SQL query and concatenates the user-controlled sortBy value directly into the ORDER BY clause without allowlist validation. Because unknown values are silently passed through `RemapOrderBy()`, an authenticated attacker can inject SQL expressions into the `ORDER BY` clause. This issue was patched in v1.30.2 by validating the order-by column against an allowlist and clearing unknown mappings. |
| VideoLAN VLC for Android prior to version 3.7.0 contains a path traversal vulnerability in the Remote Access Server routing for the authenticated endpoint GET /download. The file query parameter is concatenated into a filesystem path under the configured download directory without canonicalization or directory containment checks, allowing an authenticated attacker with network reachability to the Remote Access Server to request files outside the intended directory. The impact is bounded by the Android application sandbox and storage restrictions, typically limiting exposure to app-internal and app-specific external storage. |
| VideoLAN VLC for Android prior to version 3.7.0 contains an authentication bypass in the Remote Access Server feature due to missing or insufficient rate limiting on one-time password (OTP) verification. The Remote Access Server uses a 4-digit OTP and does not enforce effective throttling or lockout within the OTP validity window, allowing an attacker with network reachability to the server to repeatedly attempt OTP verification until a valid user_session cookie is issued. Successful exploitation results in unauthorized access to the Remote Access interface, limited to media files explicitly shared by the VLC for Android user. |
| Crypt::SysRandom::XS versions before 0.010 for Perl is vulnerable to a heap buffer overflow in the XS function random_bytes().
The function does not validate that the length parameter is non-negative. If a negative value (e.g. -1) is supplied, the expression length + 1u causes an integer wraparound, resulting in a zero-byte allocation. The subsequent call to chosen random function (e.g. getrandom) passes the original negative value, which is implicitly converted to a large unsigned value (typically SIZE_MAX). This can result in writes beyond the allocated buffer, leading to heap memory corruption and application crash (denial of service).
In common usage, the length argument is typically hardcoded by the caller, which reduces the likelihood of attacker-controlled exploitation. Applications that pass untrusted input to this parameter may be affected. |
| Golioth Pouch version 0.1.0, prior to commit 1b2219a1, contains a heap-based buffer overflow in BLE GATT server certificate handling. server_cert_write() allocates a heap buffer of size CONFIG_POUCH_SERVER_CERT_MAX_LEN when receiving the first fragment, then appends subsequent fragments using memcpy() without verifying that sufficient capacity remains. An adjacent BLE client can send unauthenticated fragments whose combined size exceeds the allocated buffer, causing a heap overflow and crash; integrity impact is also possible due to memory corruption. |
| A vulnerability was identified in go2ismail Free-CRM up to b83c40a90726d5e58f0cc680ffdcaa28a03fb5d1. This affects an unknown part of the file /api/Security/ of the component Security API. The manipulation leads to improper authorization. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. |
| osctrl is an osquery management solution. Prior to version 0.5.0, an OS command injection vulnerability exists in the `osctrl-admin` environment configuration. An authenticated administrator can inject arbitrary shell commands via the hostname parameter when creating or editing environments. These commands are embedded into enrollment one-liner scripts generated using Go's `text/template` package (which does not perform shell escaping) and execute on every endpoint that enrolls using the compromised environment. An attacker with administrator access can achieve remote code execution on every endpoint that enrolls using the compromised environment. Commands execute as root/SYSTEM (the privilege level used for osquery enrollment) before osquery is installed, leaving no agent-level audit trail. This enables backdoor installation, credential exfiltration, and full endpoint compromise. This is fixed in osctrl `v0.5.0`. As a workaround, restrict osctrl administrator access to trusted personnel, review existing environment configurations for suspicious hostnames, and/or monitor enrollment scripts for unexpected commands. |
| SteVe is an open-source EV charging station management system. In versions up to and including 3.11.0, when a charger sends a StopTransaction message, SteVe looks up the transaction solely by transactionId (a sequential integer starting from 1) without verifying that the requesting charger matches the charger that originally started the transaction. Any authenticated charger can terminate any other charger’s active session across the entire network. The root cause is in OcppServerRepositoryImpl.getTransaction() which queries only by transactionId with no chargeBoxId ownership check. The validator checks that the transaction exists and is not already stopped but never verifies identity. As an attacker controlling a single registered charger I could enumerate sequential transaction IDs and send StopTransaction messages targeting active sessions on every other charger on the network simultaneously. Combined with FINDING-014 (unauthenticated SOAP endpoints), no registered charger is even required — the attack is executable with a single curl command requiring only a known chargeBoxId. Commit 7f169c6c5b36a9c458ec41ce8af581972e5c724e contains a fix for the issue. |
| Zen C is a systems programming language that compiles to human-readable GNU C/C11. Prior to version 0.4.2, a command injection vulnerability (CWE-78) in the Zen C compiler allows local attackers to execute arbitrary shell commands by providing a specially crafted output filename via the `-o` command-line argument. The vulnerability existed in the `main` application logic (specifically in `src/main.c`), where the compiler constructed a shell command string to invoke the backend C compiler. This command string was built by concatenating various arguments, including the user-controlled output filename, and was subsequently executed using the `system()` function. Because `system()` invokes a shell to parse and execute the command, shell metacharacters within the output filename were interpreted by the shell, leading to arbitrary command execution. An attacker who can influence the command-line arguments passed to the `zc` compiler (like through a build script or a CI/CD pipeline configuration) can execute arbitrary commands with the privileges of the user running the compiler. The vulnerability has been fixed in version 0.4.2 by removing `system()` calls, implementing `ArgList`, and internal argument handling. Users are advised to update to Zen C version v0.4.2 or later. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, `discourse-policy` plugin allows any authenticated user to interact with policies on posts they do not have permission to view. The `PolicyController` loads posts by ID without verifying the current user's access, enabling policy group members to accept/unaccept policies on posts in private categories or PMs they cannot see and any authenticated user to enumerate which post IDs have policies attached via differentiated error responses (information disclosure). The issue is patched in versions 2025.12.2, 2026.1.1, and 2026.2.0 by adding a `guardian.can_see?(@post)` check in the `set_post` before_action, ensuring post visibility is verified before any policy action is processed. As a workaround, disabling the discourse-policy plugin (`policy_enabled = false`) eliminates the vulnerability. There is no other workaround without upgrading. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, several webhook endpoints (SendGrid, Mailjet, Mandrill, Postmark, SparkPost) in the `WebhooksController` accepted requests without a valid authentication token when no token was configured. This allowed unauthenticated attackers to forge webhook payloads and artificially inflate user bounce scores, potentially causing legitimate user emails to be disabled. The Mailpace endpoint had no token validation at all. Starting in versions 2025.12.2, 2026.1.1, and 2026.2.0, all webhook endpoints reject requests with a 406 response when no authentication token is configured. As a workaround, ensure that webhook authentication tokens are configured for all email provider integrations in site settings (e.g., `sendgrid_verification_key`, `mailjet_webhook_token`, `postmark_webhook_token`, `sparkpost_webhook_token`). There's no current workaround for mailpace before getting this fix. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, missing `validate_before_create` authorization in Data Explorer's `QueryGroupBookmarkable` allows any logged-in user to create bookmarks for query groups they don't have access to, enabling metadata disclosure via bookmark reminder notifications. Versions 2025.12.2, 2026.1.1, and 2026.2.0 fix this issue and also make sure `validate_before_create` throws NotImplementedError in BaseBookmarkable if not implemented, to prevent similar issues in the future. No known workarounds are available. |
| hoppscotch is an open source API development ecosystem. Prior to version 2026.2.0, any logged-in user can read, modify or delete another user's personal environment by ID. `user-environments.resolver.ts:82-109`, `updateUserEnvironment` mutation uses `@UseGuards(GqlAuthGuard)` but is missing the `@GqlUser()` decorator entirely. The user's identity is never extracted, so the service receives only the environment ID and performs a `prisma.userEnvironment.update({ where: { id } })` without any ownership filter. `deleteUserEnvironment` does extract the user but the service only uses the UID to check if the target is a global environment. Actual delete query uses WHERE { id } without AND userUid. hoppscotch environments store API keys, auth tokens and secrets used in API requests. An authenticated attacker who obtains another user's environment ID can read their secrets, replace them with malicious values or delete them entirely. The environment ID format is CUID, which limits mass exploitation but insider threat and combined info leak scenarios are realistic. Version 2026.2.0 fixes the issue. |
