| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: avoid chain re-validation if possible
Hamza Mahfooz reports cpu soft lock-ups in
nft_chain_validate():
watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547]
[..]
RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables]
[..]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_table_validate+0x6b/0xb0 [nf_tables]
nf_tables_validate+0x8b/0xa0 [nf_tables]
nf_tables_commit+0x1df/0x1eb0 [nf_tables]
[..]
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Consider:
1 input -> j2 -> j3
2 input -> j2 -> j3
3 input -> j1 -> j2 -> j3
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix memory leak on usb_submit_urb() failure
In async_set_registers(), when usb_submit_urb() fails, the allocated
async_req structure and URB are not freed, causing a memory leak.
The completion callback async_set_reg_cb() is responsible for freeing
these allocations, but it is only called after the URB is successfully
submitted and completes (successfully or with error). If submission
fails, the callback never runs and the memory is leaked.
Fix this by freeing both the URB and the request structure in the error
path when usb_submit_urb() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix refcount leak when invalid session is found on session lookup
When a session is found but its state is not SMB2_SESSION_VALID, It
indicates that no valid session was found, but it is missing to decrement
the reference count acquired by the session lookup, which results in
a reference count leak. This patch fixes the issue by explicitly calling
ksmbd_user_session_put to release the reference to the session. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: correctly handle io_poll_add() return value on update
When the core of io_uring was updated to handle completions
consistently and with fixed return codes, the POLL_REMOVE opcode
with updates got slightly broken. If a POLL_ADD is pending and
then POLL_REMOVE is used to update the events of that request, if that
update causes the POLL_ADD to now trigger, then that completion is lost
and a CQE is never posted.
Additionally, ensure that if an update does cause an existing POLL_ADD
to complete, that the completion value isn't always overwritten with
-ECANCELED. For that case, whatever io_poll_add() set the value to
should just be retained. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: phy: isp1301: fix non-OF device reference imbalance
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use. |
| The The BuddyPress plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 14.3.3. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. |
| An issue was discovered in Free5gc NRF 1.4.0. In the access-token generation logic of free5GC, the AccessTokenScopeCheck() function in file internal/sbi/processor/access_token.go bypasses all scope validation when the attacker uses a crafted targetNF value. This allows attackers to obtain an access token with any arbitrary scope. |
| Missing Authorization vulnerability in Syed Balkhi Sugar Calendar (Lite) sugar-calendar-lite allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Sugar Calendar (Lite): from n/a through <= 3.10.1. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Ability, Inc Web Accessibility with Max Access accessibility-toolbar allows Stored XSS.This issue affects Web Accessibility with Max Access: from n/a through <= 2.1.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in LogicHunt Logo Slider logo-slider-wp allows Stored XSS.This issue affects Logo Slider: from n/a through <= 4.9.0. |
| Missing Authorization vulnerability in Imaginate Solutions File Uploads Addon for WooCommerce woo-addon-uploads allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects File Uploads Addon for WooCommerce: from n/a through <= 1.7.3. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Daniel Iser Easy Modal easy-modal allows Stored XSS.This issue affects Easy Modal: from n/a through <= 2.1.0. |
| Missing Authorization vulnerability in Web Impian Bayarcash WooCommerce bayarcash-wc allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Bayarcash WooCommerce: from n/a through <= 4.3.11. |
| Missing Authorization vulnerability in themebeez Simple GDPR Cookie Compliance simple-gdpr-cookie-compliance allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Simple GDPR Cookie Compliance: from n/a through <= 2.0.0. |
| Missing Authorization vulnerability in Hyyan Abo Fakher Hyyan WooCommerce Polylang Integration woo-poly-integration allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Hyyan WooCommerce Polylang Integration: from n/a through <= 1.5.0. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Nelio Software Nelio Content nelio-content allows Blind SQL Injection.This issue affects Nelio Content: from n/a through <= 4.1.0. |
| Missing Authorization vulnerability in Ryviu Ryviu – Product Reviews for WooCommerce ryviu allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Ryviu – Product Reviews for WooCommerce: from n/a through <= 3.1.26. |
| Missing Authorization vulnerability in Cloudinary Cloudinary cloudinary-image-management-and-manipulation-in-the-cloud-cdn allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Cloudinary: from n/a through <= 3.3.0. |
