| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Don't call folio_wait_writeback() without a folio reference
folio_wait_writeback() requires that no spinlocks are held and that
a folio reference is held, as documented. After we dropped the PTL, the
folio could get freed concurrently. So grab a temporary reference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: missing check virtio
Two missing check in virtio_net_hdr_to_skb() allowed syzbot
to crash kernels again
1. After the skb_segment function the buffer may become non-linear
(nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere
the __skb_linearize function will not be executed, then the buffer will
remain non-linear. Then the condition (offset >= skb_headlen(skb))
becomes true, which causes WARN_ON_ONCE in skb_checksum_help.
2. The struct sk_buff and struct virtio_net_hdr members must be
mathematically related.
(gso_size) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) must be greater than (needed) otherwise WARN_ON_ONCE.
(remainder) may be 0 if division is without remainder.
offset+2 (4191) > skb_headlen() (1116)
WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303
Modules linked in:
CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303
Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef
RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209
RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001
RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c
R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d
FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777
ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584
ip_finish_output_gso net/ipv4/ip_output.c:286 [inline]
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295
ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:451 [inline]
ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129
iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline]
sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3545 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561
__dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Found by Linux Verification Center (linuxtesting.org) with Syzkaller |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: properly dereference pe in ip_vs_add_service
Use pe directly to resolve sparse warning:
net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression |
| In the Linux kernel, the following vulnerability has been resolved:
net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE
The following splat is easy to reproduce upstream as well as in -stable
kernels. Florian Westphal provided the following commit:
d1dab4f71d37 ("net: add and use __skb_get_hash_symmetric_net")
but this complementary fix has been also suggested by Willem de Bruijn
and it can be easily backported to -stable kernel which consists in
using DEBUG_NET_WARN_ON_ONCE instead to silence the following splat
given __skb_get_hash() is used by the nftables tracing infrastructure to
to identify packets in traces.
[69133.561393] ------------[ cut here ]------------
[69133.561404] WARNING: CPU: 0 PID: 43576 at net/core/flow_dissector.c:1104 __skb_flow_dissect+0x134f/
[...]
[69133.561944] CPU: 0 PID: 43576 Comm: socat Not tainted 6.10.0-rc7+ #379
[69133.561959] RIP: 0010:__skb_flow_dissect+0x134f/0x2ad0
[69133.561970] Code: 83 f9 04 0f 84 b3 00 00 00 45 85 c9 0f 84 aa 00 00 00 41 83 f9 02 0f 84 81 fc ff
ff 44 0f b7 b4 24 80 00 00 00 e9 8b f9 ff ff <0f> 0b e9 20 f3 ff ff 41 f6 c6 20 0f 84 e4 ef ff ff 48 8d 7b 12 e8
[69133.561979] RSP: 0018:ffffc90000006fc0 EFLAGS: 00010246
[69133.561988] RAX: 0000000000000000 RBX: ffffffff82f33e20 RCX: ffffffff81ab7e19
[69133.561994] RDX: dffffc0000000000 RSI: ffffc90000007388 RDI: ffff888103a1b418
[69133.562001] RBP: ffffc90000007310 R08: 0000000000000000 R09: 0000000000000000
[69133.562007] R10: ffffc90000007388 R11: ffffffff810cface R12: ffff888103a1b400
[69133.562013] R13: 0000000000000000 R14: ffffffff82f33e2a R15: ffffffff82f33e28
[69133.562020] FS: 00007f40f7131740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[69133.562027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[69133.562033] CR2: 00007f40f7346ee0 CR3: 000000015d200001 CR4: 00000000001706f0
[69133.562040] Call Trace:
[69133.562044] <IRQ>
[69133.562049] ? __warn+0x9f/0x1a0
[ 1211.841384] ? __skb_flow_dissect+0x107e/0x2860
[...]
[ 1211.841496] ? bpf_flow_dissect+0x160/0x160
[ 1211.841753] __skb_get_hash+0x97/0x280
[ 1211.841765] ? __skb_get_hash_symmetric+0x230/0x230
[ 1211.841776] ? mod_find+0xbf/0xe0
[ 1211.841786] ? get_stack_info_noinstr+0x12/0xe0
[ 1211.841798] ? bpf_ksym_find+0x56/0xe0
[ 1211.841807] ? __rcu_read_unlock+0x2a/0x70
[ 1211.841819] nft_trace_init+0x1b9/0x1c0 [nf_tables]
[ 1211.841895] ? nft_trace_notify+0x830/0x830 [nf_tables]
[ 1211.841964] ? get_stack_info+0x2b/0x80
[ 1211.841975] ? nft_do_chain_arp+0x80/0x80 [nf_tables]
[ 1211.842044] nft_do_chain+0x79c/0x850 [nf_tables] |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Don't lose track of restrictions on cred_transfer
When a process' cred struct is replaced, this _almost_ always invokes
the cred_prepare LSM hook; but in one special case (when
KEYCTL_SESSION_TO_PARENT updates the parent's credentials), the
cred_transfer LSM hook is used instead. Landlock only implements the
cred_prepare hook, not cred_transfer, so KEYCTL_SESSION_TO_PARENT causes
all information on Landlock restrictions to be lost.
This basically means that a process with the ability to use the fork()
and keyctl() syscalls can get rid of all Landlock restrictions on
itself.
Fix it by adding a cred_transfer hook that does the same thing as the
existing cred_prepare hook. (Implemented by having hook_cred_prepare()
call hook_cred_transfer() so that the two functions are less likely to
accidentally diverge in the future.) |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid using corrupted block bitmap buffer
When the filesystem block bitmap is corrupted, we detect the corruption
while loading the bitmap and fail the allocation with error. However the
next allocation from the same bitmap will notice the bitmap buffer is
already loaded and tries to allocate from the bitmap with mixed results
(depending on the exact nature of the bitmap corruption). Fix the
problem by using BH_verified bit to indicate whether the bitmap is valid
or not. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: make sure the first directory block is not a hole
The syzbot constructs a directory that has no dirblock but is non-inline,
i.e. the first directory block is a hole. And no errors are reported when
creating files in this directory in the following flow.
ext4_mknod
...
ext4_add_entry
// Read block 0
ext4_read_dirblock(dir, block, DIRENT)
bh = ext4_bread(NULL, inode, block, 0)
if (!bh && (type == INDEX || type == DIRENT_HTREE))
// The first directory block is a hole
// But type == DIRENT, so no error is reported.
After that, we get a directory block without '.' and '..' but with a valid
dentry. This may cause some code that relies on dot or dotdot (such as
make_indexed_dir()) to crash.
Therefore when ext4_read_dirblock() finds that the first directory block
is a hole report that the filesystem is corrupted and return an error to
avoid loading corrupted data from disk causing something bad. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed
If an NTFS file system is mounted to another system with different
PAGE_SIZE from the original system, log->page_size will change in
log_replay(), but log->page_{mask,bits} don't change correspondingly.
This will cause a panic because "u32 bytes = log->page_size - page_off"
will get a negative value in the later read_log_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to don't dirty inode for readonly filesystem
syzbot reports f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:933!
RIP: 0010:f2fs_evict_inode+0x1576/0x1590 fs/f2fs/inode.c:933
Call Trace:
evict+0x2a4/0x620 fs/inode.c:664
dispose_list fs/inode.c:697 [inline]
evict_inodes+0x5f8/0x690 fs/inode.c:747
generic_shutdown_super+0x9d/0x2c0 fs/super.c:675
kill_block_super+0x44/0x90 fs/super.c:1667
kill_f2fs_super+0x303/0x3b0 fs/f2fs/super.c:4894
deactivate_locked_super+0xc1/0x130 fs/super.c:484
cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256
task_work_run+0x24a/0x300 kernel/task_work.c:180
ptrace_notify+0x2cd/0x380 kernel/signal.c:2399
ptrace_report_syscall include/linux/ptrace.h:411 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:473 [inline]
syscall_exit_work kernel/entry/common.c:251 [inline]
syscall_exit_to_user_mode_prepare kernel/entry/common.c:278 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x15c/0x280 kernel/entry/common.c:296
do_syscall_64+0x50/0x110 arch/x86/entry/common.c:88
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The root cause is:
- do_sys_open
- f2fs_lookup
- __f2fs_find_entry
- f2fs_i_depth_write
- f2fs_mark_inode_dirty_sync
- f2fs_dirty_inode
- set_inode_flag(inode, FI_DIRTY_INODE)
- umount
- kill_f2fs_super
- kill_block_super
- generic_shutdown_super
- sync_filesystem
: sb is readonly, skip sync_filesystem()
- evict_inodes
- iput
- f2fs_evict_inode
- f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE))
: trigger kernel panic
When we try to repair i_current_depth in readonly filesystem, let's
skip dirty inode to avoid panic in later f2fs_evict_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.
It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.
So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Add a per-VF limit on number of FDIR filters
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/imx-irqsteer: Handle runtime power management correctly
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a segment issue when downgrading gso_size
Linearize the skb when downgrading gso_size because it may trigger a
BUG_ON() later when the skb is segmented as described in [1,2]. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: add missing condition check for existence of mapped data
nvme_map_data() is called when request has physical segments, hence
the nvme_unmap_data() should have same condition to avoid dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
mkdir /mnt/test/comp
f2fs_io setflags compression /mnt/test/comp
dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1
truncate --size 13 /mnt/test/comp/testfile
In the above scenario, we can get a BUG_ON.
kernel BUG at fs/f2fs/segment.c:3589!
Call Trace:
do_write_page+0x78/0x390 [f2fs]
f2fs_outplace_write_data+0x62/0xb0 [f2fs]
f2fs_do_write_data_page+0x275/0x740 [f2fs]
f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs]
f2fs_write_multi_pages+0x1e5/0xae0 [f2fs]
f2fs_write_cache_pages+0xab1/0xc60 [f2fs]
f2fs_write_data_pages+0x2d8/0x330 [f2fs]
do_writepages+0xcf/0x270
__writeback_single_inode+0x44/0x350
writeback_sb_inodes+0x242/0x530
__writeback_inodes_wb+0x54/0xf0
wb_writeback+0x192/0x310
wb_workfn+0x30d/0x400
The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the
page was set the gcing flag by set_cluster_dirty(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mos7840: fix crash on resume
Since commit c49cfa917025 ("USB: serial: use generic method if no
alternative is provided in usb serial layer"), USB serial core calls the
generic resume implementation when the driver has not provided one.
This can trigger a crash on resume with mos7840 since support for
multiple read URBs was added back in 2011. Specifically, both port read
URBs are now submitted on resume for open ports, but the context pointer
of the second URB is left set to the core rather than mos7840 port
structure.
Fix this by implementing dedicated suspend and resume functions for
mos7840.
Tested with Delock 87414 USB 2.0 to 4x serial adapter.
[ johan: analyse crash and rewrite commit message; set busy flag on
resume; drop bulk-in check; drop unnecessary usb_kill_urb() ] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix scv instruction crash with kexec
kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.
Change the kexec sequence to disable AIL after other CPUs have been
brought down.
As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-switch, Create ingress ACL when needed
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot
Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:
BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.
The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.
Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.
Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree. |
