| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds read vulnerability exists in the cv_send_blockdata
functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault3 Plus prior to 6.2.26.36. A specially crafted
ControlVault API call can lead to an information leak. An attacker can
issue an API call to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate l_tree_depth to avoid out-of-bounds access
The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is
limited to OCFS2_MAX_PATH_DEPTH.
Add a check to prevent out-of-bounds access if l_tree_depth has an invalid
value, which may occur when reading from a corrupted mounted disk [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix geneve_opt length integer overflow
struct geneve_opt uses 5 bit length for each single option, which
means every vary size option should be smaller than 128 bytes.
However, all current related Netlink policies cannot promise this
length condition and the attacker can exploit a exact 128-byte size
option to *fake* a zero length option and confuse the parsing logic,
further achieve heap out-of-bounds read.
One example crash log is like below:
[ 3.905425] ==================================================================
[ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0
[ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177
[ 3.906646]
[ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1
[ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 3.907784] Call Trace:
[ 3.907925] <TASK>
[ 3.908048] dump_stack_lvl+0x44/0x5c
[ 3.908258] print_report+0x184/0x4be
[ 3.909151] kasan_report+0xc5/0x100
[ 3.909539] kasan_check_range+0xf3/0x1a0
[ 3.909794] memcpy+0x1f/0x60
[ 3.909968] nla_put+0xa9/0xe0
[ 3.910147] tunnel_key_dump+0x945/0xba0
[ 3.911536] tcf_action_dump_1+0x1c1/0x340
[ 3.912436] tcf_action_dump+0x101/0x180
[ 3.912689] tcf_exts_dump+0x164/0x1e0
[ 3.912905] fw_dump+0x18b/0x2d0
[ 3.913483] tcf_fill_node+0x2ee/0x460
[ 3.914778] tfilter_notify+0xf4/0x180
[ 3.915208] tc_new_tfilter+0xd51/0x10d0
[ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560
[ 3.919118] netlink_rcv_skb+0xcd/0x200
[ 3.919787] netlink_unicast+0x395/0x530
[ 3.921032] netlink_sendmsg+0x3d0/0x6d0
[ 3.921987] __sock_sendmsg+0x99/0xa0
[ 3.922220] __sys_sendto+0x1b7/0x240
[ 3.922682] __x64_sys_sendto+0x72/0x90
[ 3.922906] do_syscall_64+0x5e/0x90
[ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 3.924122] RIP: 0033:0x7e83eab84407
[ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
[ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407
[ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003
[ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c
[ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0
[ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8
Fix these issues by enforing correct length condition in related
policies. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate zero num_subauth before sub_auth is accessed
Access psid->sub_auth[psid->num_subauth - 1] without checking
if num_subauth is non-zero leads to an out-of-bounds read.
This patch adds a validation step to ensure num_subauth != 0
before sub_auth is accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes
Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.
According to Documentation/admin-guide/mm/numaperf.rst:
"Some memory may share the same node as a CPU, and others are provided as
memory only nodes."
Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".
On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
index that is 1 out of bounds
This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.
When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:
UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
index 512 is out of range for type 'unsigned long[512]'
[...]
Call Trace:
dump_stack
__ubsan_handle_out_of_bounds
load_microcode_amd
request_microcode_amd
reload_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.
[ bp: Massage commit message, fix typo. ] |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: enforce underlying device type
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: limit printed string from FW file
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr: do not call mr_mfc_uses_dev() for unres entries
syzbot found that calling mr_mfc_uses_dev() for unres entries
would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif
alias to "struct sk_buff_head unresolved", which contain two pointers.
This code never worked, lets remove it.
[1]
Unable to handle kernel paging request at virtual address ffff5fff2d536613
KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f]
Modules linked in:
CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline]
pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334
lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline]
lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334
Call trace:
mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P)
mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P)
mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382
ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648
rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327
rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791
netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317
netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973
sock_recvmsg_nosec net/socket.c:1033 [inline]
sock_recvmsg net/socket.c:1055 [inline]
sock_read_iter+0x2d8/0x40c net/socket.c:1125
new_sync_read fs/read_write.c:484 [inline]
vfs_read+0x740/0x970 fs/read_write.c:565
ksys_read+0x15c/0x26c fs/read_write.c:708 |
| The various bson_append functions in the MongoDB C driver library may be susceptible to buffer overflow when performing operations that could result in a final BSON document which exceeds the maximum allowable size (INT32_MAX), resulting in a segmentation fault and possible application crash. This issue affected libbson versions prior to 1.27.5, MongoDB Server v8.0 versions prior to 8.0.1 and MongoDB Server v7.0 versions prior to 7.0.16 |
| The bson_string_append function in MongoDB C Driver may be vulnerable to a buffer overflow where the function might attempt to allocate too small of buffer and may lead to memory corruption of neighbouring heap memory. This issue affects libbson versions prior to 1.27.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: socinfo: Avoid out of bounds read of serial number
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: add index check to assert to avoid buffer overflow in _read_freq()
Pass the freq index to the assert function to make sure
we do not read a freq out of the opp->rates[] table when called
from the indexed variants:
dev_pm_opp_find_freq_exact_indexed() or
dev_pm_opp_find_freq_ceil/floor_indexed().
Add a secondary parameter to the assert function, unused
for assert_single_clk() then add assert_clk_index() which
will check for the clock index when called from the _indexed()
find functions. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: don't allow 1 packet limit
The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in
kernel as well.
This fixes the following syzkaller reported crash:
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x125/0x19f lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347
sfq_link net/sched/sch_sfq.c:210 [inline]
sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238
sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500
sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296
netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline]
dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362
__dev_close_many+0x214/0x350 net/core/dev.c:1468
dev_close_many+0x207/0x510 net/core/dev.c:1506
unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738
unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695
unregister_netdevice include/linux/netdevice.h:2893 [inline]
__tun_detach+0x6b6/0x1600 drivers/net/tun.c:689
tun_detach drivers/net/tun.c:705 [inline]
tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640
__fput+0x203/0x840 fs/file_table.c:280
task_work_run+0x129/0x1b0 kernel/task_work.c:185
exit_task_work include/linux/task_work.h:33 [inline]
do_exit+0x5ce/0x2200 kernel/exit.c:931
do_group_exit+0x144/0x310 kernel/exit.c:1046
__do_sys_exit_group kernel/exit.c:1057 [inline]
__se_sys_exit_group kernel/exit.c:1055 [inline]
__x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055
do_syscall_64+0x6c/0xd0
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fe5e7b52479
Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f.
RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0
R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270
The crash can be also be reproduced with the following (with a tc
recompiled to allow for sfq limits of 1):
tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s
../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1
ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1
Scenario that triggers the crash:
* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1
* TBF dequeues: it peeks from SFQ which moves the packet to the
gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so
it schedules itself for later.
* the second packet is sent and TBF tries to queues it to SFQ. qdisc
qlen is now 2 and because the SFQ limit is 1 the packet is dropped
by SFQ. At this point qlen is 1, and all of the SFQ slots are empty,
however q->tail is not NULL.
At this point, assuming no more packets are queued, when sch_dequeue
runs again it will decrement the qlen for the current empty slot
causing an underflow and the subsequent out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Fix the out of bound issue of vmemmap address
In sparse vmemmap model, the virtual address of vmemmap is calculated as:
((struct page *)VMEMMAP_START - (phys_ram_base >> PAGE_SHIFT)).
And the struct page's va can be calculated with an offset:
(vmemmap + (pfn)).
However, when initializing struct pages, kernel actually starts from the
first page from the same section that phys_ram_base belongs to. If the
first page's physical address is not (phys_ram_base >> PAGE_SHIFT), then
we get an va below VMEMMAP_START when calculating va for it's struct page.
For example, if phys_ram_base starts from 0x82000000 with pfn 0x82000, the
first page in the same section is actually pfn 0x80000. During
init_unavailable_range(), we will initialize struct page for pfn 0x80000
with virtual address ((struct page *)VMEMMAP_START - 0x2000), which is
below VMEMMAP_START as well as PCI_IO_END.
This commit fixes this bug by introducing a new variable
'vmemmap_start_pfn' which is aligned with memory section size and using
it to calculate vmemmap address instead of phys_ram_base. |
| libpoppler.so in Poppler through 24.12.0 has an out-of-bounds read vulnerability within the JBIG2Bitmap::combine function in JBIG2Stream.cc. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: fix potential array underflow in ucsi_ccg_sync_control()
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Stop amdgpu_dm initialize when link nums greater than max_links
[Why]
Coverity report OVERRUN warning. There are
only max_links elements within dc->links. link
count could up to AMDGPU_DM_MAX_DISPLAY_INDEX 31.
[How]
Make sure link count less than max_links. |
| A stack based buffer overflow vulnerability is present in OpenPrinting ippusbxd 1.34. A specially configured printer that supports IPP-over-USB can cause a buffer overflow which can lead to a arbitrary code execution in a privileged service. To trigger the vulnerability, a malicious device would need to be connected to the vulnerable system over USB. |
| A heap-based buffer overflow was found in the SDHCI device emulation of QEMU. The bug is triggered when both `s->data_count` and the size of `s->fifo_buffer` are set to 0x200, leading to an out-of-bound access. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition. |
